I can't turn on a LED

[christianeme]

Hi everybody:

I'm using the PhidgetInterfaceKit 0/16/16 and the FS2Phidgets program version 3.1.2 i configure the output 0 with the Autotrottle master switch .

The program can comunicate with the phidgets boards and the flight Simulator , when i press the red button to switch all LEDS to on , all the internal leds come on but the leds that is connected to the born stay off.

Is impossible to turn on a led .

Best Regards

Christian Eme
Lima-Peru

[alandyer]

Is there anyone out there whose push-to-test function is not working on 3.1.2 ?

Don't all rush at once !

[imported_EW321]

Is there anyone out there whose push-to-test function is not working on 3.1.2 ?

Don't all rush at once !

Hi Alandyer,
Christian is right, but this is not a issue.
He has to "Disconnect" first then it works correct, all LED`s lights up.

Best Regards
Thomas Richter

[alandyer]

Thanks, Thomas.

Expand on "disconnect" . Does he have to disconnect board ? or re-start program ?

Alan.

[imported_EW321]

Hi,
NOT the board only click on "DISCONNECT" Buttom on the upper right if FS is running.
Button is in FSPhidgets.

Best Regards
Thomas Richter

[alandyer]

Aaah, yes. The "Stop communications" button.
The Push to Test is grayed out when FS and Phidgets are communicating.
Don't want FS attempting to switch LEDs on or off while testing hardware.

Of course, I should have a note about that in the documentation.
Hopefully, we can get Christian to illuminate his leds.
Thanks for pointing out, Thomas. Was great help.