One input for gear announciators?

[TorbenJA]

I was wondering if the various software supports error warnings for separate gear falliors on the B737 - such a nose gear announciator being red, while the main gear is showing two green lights. If so, I need 6 input (+) leads - one for each announciator , if not, I only need 2 - one for red and one for green light (and a shared common (-) for them all).
I have the FDS3X sysboard for interfacing.

Any suggestions?

Torben

[jskibo]

Sim A, ProSim737 and PM all support the separate outputs. If you only use two you plan on running all the LEDs (6 green or 6 red) off each output? Not sure you'll like that

[TorbenJA]

That's why I asked. couldn't find separate offsets in the FSUIPC list. 6 separate outputs it is then. Thanks.

Torben

[jskibo]

I use these:

LIGHT=737-MIP_GEAR_L_TRANSIT Fsaddr:5347 Bit:2
LIGHT=737-MIP_GEAR_L_DOWN Fsaddr:5347 Bit:3
LIGHT=737-LIGHT=737-MIP_GEAR_N_TRANSIT Fsaddr:5347 Bit:4
LIGHT=737-MIP_GEAR_N_DOWN Fsaddr:5347 Bit:5
LIGHT=737-MIP_GEAR_R_TRANSIT Fsaddr:5347 Bit:6
LIGHT=737-MIP_GEAR_R_DOWN Fsaddr:5347 Bit:7