Results 1 to 10 of 15
Thread: PMSystems 99b blinking leds!
-
02-19-2007, 04:49 PM #1
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
PMSystems 99b blinking leds!
I emailed this to PM support has anyone the same problem?
-----------------------------------------------------------------------
After update to 99b if i turn off the battery switch my leds start blinking!?
Tried default systems file and thomas one, strange things happens! like wipers go on etc..
I have a MasterCard and tried a new sioc minimalistic file (i tought some offsets conflictings) but same things.
Also with default logics even if my hardware Engine start swithches are set to GRD or CONT they return in the software panel to OFF position!?
Here is my SIOC file, after i added the first led for HYD pumps it started blinking when batt is off.
Check it out!
Here is my SIOC code with nothing wrong i think!
-
02-20-2007, 02:52 AM #2
Yep same here, regarding the leds, actually mine start blinking when Batt is se to ON also
I have sent an email about a month ago and gthey told me that they were going to look at it.
ChrisChris
-
02-27-2007, 12:31 AM #3
Just to add my two cents worth, I'm experiencing the same thing. Just out of curiosity, are you both using Phidgets as well? For a short while I thought that it might have been Phidgets related.
Regards,
James
-
02-27-2007, 12:57 AM #4
Oh my.
How do you learn to write those instructions?Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
02-27-2007, 01:15 AM #5
Actually with Phidgets, Alan Dyer has already written the instructions and developed a freindly user interface to program with. I too am program dumb and without Alans work I would still be lost!
Regards,
James
-
02-27-2007, 03:55 AM #6
-
02-27-2007, 05:42 AM #7
- Join Date
- Jan 2007
- Location
- Italy
- Posts
- 204
I'm using IO cards from Opencockpits, so it is not an Hardware interface problem!
-
02-27-2007, 11:06 AM #8
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
...have been holding my breath throughout post.
For the record, there is no writing instructions with Phidgets.
Everything can be set using (what I hope) is a friendly application interface.
-
02-27-2007, 01:59 PM #9
Check the standby power switch.
I found my settings for that switch changed and when I clicked to off (software), the blinking stopped.
-
02-27-2007, 11:36 PM #10
Well, it seems to be the PM Systems 99b then.
Alan, yes your Phidgets interface application is VERY user freindly! I was just curious if the problem exsisted outside of us phidgets users and I got my answer...
Tony, that is interesting. Will have to check it out. Thanks.
Regards,
James
Similar Threads
-
BU0836X and LEDS
By NCW in forum General Builder Questions All Aircraft TypesReplies: 6Last Post: 08-18-2011, 05:28 AM -
Leds
By B763 in forum General Builder Questions All Aircraft TypesReplies: 2Last Post: 06-30-2010, 06:22 PM -
LEDs too dim?
By HondaCop in forum General Builder Questions All Aircraft TypesReplies: 18Last Post: 09-10-2009, 07:26 AM -
connecting leds to 0/16/16
By aviaparts in forum Phidgets & Cockpit Simulator BuilderReplies: 4Last Post: 03-25-2008, 03:40 PM
Prettys Womans from your city for night
A320 Sound Files Missing