Where are the Discretes?

[imported_pylet]

In 4.0.1 and 4.1.1 I can not set discrete values for the AUTO BRAKE SWITCH. Any idea on how to do this? 3.0.2 had a discrete button but that version doesn't have the PUSH TO RESET capability that 4.1.1 does. Looks like one step forward and 3 steps back....bummer

Lyle

[imported_pylet]

Again, I have fixed my own problem somehow, not sure how though. I was messing around inside the cards ini file and for some reason I now have the capability to set the discretes under the calibrate button. Isn't Friday the 13th next week?

Lyle

[alandyer]

Lyle,

The assignment of discretes are on the calibration form.
Assign Auto Brake and press Calibrate button.

I checked FS2PhUIPC401.ini and CDU_MSG is not these.
Inadvertantly added an older file to zip. In the interm you can always add CDU_MSG
by using FS variable Editor (fsVariable.exe)

Offset is 052C,
Length is 1,
FS Varable Type is Part of Bitmap
and Bit Mapping is 1.

Regards,
Alan.

[imported_pylet]

Excellent, thanks for the reply and information. My CALIBRATE button would not light up so I had to go into the ini file and make it non-digital so it would work. Also I noticed the offset for the nose gear is incorrect in the 401 ini. It should be 0BEC.

One more thing, were do I get FS variable Editor (fsVariable.exe)?

Thanks again for all the help,
Lyle

[alandyer]

Lyle,

Thanks for heads up on nose gear.

In next release the Discretes button will be on initial screen.
Relocated by popular demand.

Regards,
Alan.