Results 1 to 6 of 6
  1. #1
    Enrico Schiratti
    Guest

    Re: flaps indicator

    > I see you have LEFlaps EXT and Transit functioning and was in great hope
    > that you might have an offset for those? You have them functioning
    > correctly and would like to drive my real korry's thru phidgets. Thanks,


    I am simply using the FS analog offsets, do you need to have them translated

    to bits?


  2. #2
    Rob Archer
    Guest

    Re: flaps indicator

    That would be fantastic!
    That way i could use a simple offset to drive them versus a range setting.
    Thanks!
    Rob
    "Enrico Schiratti" wrote in message
    news:388842.77866@wb.onvix.com...
    > > I see you have LEFlaps EXT and Transit functioning and was in great

    hope
    > > that you might have an offset for those? You have them functioning
    > > correctly and would like to drive my real korry's thru phidgets.

    Thanks,
    >
    > I am simply using the FS analog offsets, do you need to have them

    translated
    >
    > to bits?
    >



  3. #3
    Enrico Schiratti
    Guest

    Re: flaps indicator

    I will see what I can do...

    Ciao

    Enrico

    "Rob Archer" wrote in message
    news:389105.77866@wb.onvix.com...
    > That would be fantastic!
    > That way i could use a simple offset to drive them versus a range

    setting.
    > Thanks!
    > Rob
    > "Enrico Schiratti" wrote in message
    > news:388842.77866@wb.onvix.com...
    >> > I see you have LEFlaps EXT and Transit functioning and was in great

    > hope
    >> > that you might have an offset for those? You have them functioning
    >> > correctly and would like to drive my real korry's thru phidgets.

    > Thanks,
    >>
    >> I am simply using the FS analog offsets, do you need to have them

    > translated
    >>
    >> to bits?
    >>

    >



  4. #4
    Enrico Schiratti
    Guest

    Re: flaps indicator

    It would be much cleaner if you made a range checking yourself, in any case

    with the next build of the GC, the following bits will be set:

    5646 .4 LEFlapsTransit //written by GC
    5646 .5 LEFlapsExtended //written by GC

    "Rob Archer" wrote in message
    news:389105.77866@wb.onvix.com...
    > That would be fantastic!
    > That way i could use a simple offset to drive them versus a range

    setting.
    > Thanks!
    > Rob
    > "Enrico Schiratti" wrote in message
    > news:388842.77866@wb.onvix.com...
    >> > I see you have LEFlaps EXT and Transit functioning and was in great

    > hope
    >> > that you might have an offset for those? You have them functioning
    >> > correctly and would like to drive my real korry's thru phidgets.

    > Thanks,
    >>
    >> I am simply using the FS analog offsets, do you need to have them

    > translated
    >>
    >> to bits?
    >>

    >



  5. #5
    Rob Archer
    Guest

    Re: flaps indicator

    Thanks Enrico!
    Rob

    "Enrico Schiratti" wrote in message
    news:389204.77866@wb.onvix.com...
    > It would be much cleaner if you made a range checking yourself, in any

    case
    >
    > with the next build of the GC, the following bits will be set:
    >
    > 5646 .4 LEFlapsTransit //written by GC
    > 5646 .5 LEFlapsExtended //written by GC
    >
    > "Rob Archer" wrote in message
    > news:389105.77866@wb.onvix.com...
    > > That would be fantastic!
    > > That way i could use a simple offset to drive them versus a range

    > setting.
    > > Thanks!
    > > Rob
    > > "Enrico Schiratti" wrote in message
    > > news:388842.77866@wb.onvix.com...
    > >> > I see you have LEFlaps EXT and Transit functioning and was in great

    > > hope
    > >> > that you might have an offset for those? You have them functioning
    > >> > correctly and would like to drive my real korry's thru phidgets.

    > > Thanks,
    > >>
    > >> I am simply using the FS analog offsets, do you need to have them

    > > translated
    > >>
    > >> to bits?
    > >>

    > >

    >



  6. #6
    Enrico Schiratti
    Guest

    Re: flaps indicator

    Forgot to add that the analog flap gauge should be enabled in the EICAS,
    even if not visible (move it off the screen or so).

    "Rob Archer" wrote in message
    news:389404.77866@wb.onvix.com...
    > Thanks Enrico!
    > Rob
    >
    > "Enrico Schiratti" wrote in message
    > news:389204.77866@wb.onvix.com...
    >> It would be much cleaner if you made a range checking yourself, in any

    > case
    >>
    >> with the next build of the GC, the following bits will be set:
    >>
    >> 5646 .4 LEFlapsTransit //written by GC
    >> 5646 .5 LEFlapsExtended //written by GC
    >>
    >> "Rob Archer" wrote in message
    >> news:389105.77866@wb.onvix.com...
    >> > That would be fantastic!
    >> > That way i could use a simple offset to drive them versus a range

    >> setting.
    >> > Thanks!
    >> > Rob
    >> > "Enrico Schiratti" wrote in message
    >> > news:388842.77866@wb.onvix.com...
    >> >> > I see you have LEFlaps EXT and Transit functioning and was in great
    >> > hope
    >> >> > that you might have an offset for those? You have them functioning
    >> >> > correctly and would like to drive my real korry's thru phidgets.
    >> > Thanks,
    >> >>
    >> >> I am simply using the FS analog offsets, do you need to have them
    >> > translated
    >> >>
    >> >> to bits?
    >> >>
    >> >

    >>

    >



Similar Threads

  1. Flaps indicator (Opencockpits) help
    By dazchad in forum General Builder Questions All Aircraft Types
    Replies: 4
    Last Post: 02-13-2011, 07:04 AM
  2. B737 LE devices/Flaps indicator... where to start?
    By peterkwu in forum Cockpit Parts and Motion Platforms
    Replies: 16
    Last Post: 01-15-2009, 11:20 PM
  3. Flaps Indicator
    By Paul Harmer in forum PM General Q & A
    Replies: 1
    Last Post: 03-12-2006, 08:43 AM
  4. flaps indicator
    By Rob Archer in forum PM General Q & A
    Replies: 0
    Last Post: 02-05-2006, 03:17 PM