RPM -problem in the latest RJGC build 72

[Christian Jungbluth]

Hi there,

since the latest build 72 for the PM RJCG the ITT in the turboprops displays
correct now

But for this, the RPM Display is wrong now (well working til the build 70!).
See picture, it shows only 1.0 (instead of 100%)and isn,t adjustable by the
RPM-factor anymore, wathever I type in?

At the low position of the prop lever it shows 0.8 (instead of 90%). What
happened?

The aircraft is the PMDG B1900D, I didn´t try another yet.


Regards

Chris

[Enrico Schiratti]

> since the latest build 72 for the PM RJCG the ITT in the
> turboprops displays
> correct now
>
> But for this, the RPM Display is wrong now (well working
> til the build 70!).
> See picture, it shows only 1.0 (instead of 100%)and isn,t
> adjustable by the
> RPM-factor anymore, wathever I type in?
>
> At the low position of the prop lever it shows 0.8
> (instead of 90%). What
> happened?

I will check this... the RPM value is correct though, the %
is wrong then?

[Enrico Schiratti]

Ok, I forgot to multiply the value by 100 in the 2 and 4
engine setting... uploaded as 73b... thanks.

Ciao

Enrico

"Christian Jungbluth" wrote in
message news:386121.77412@wb.onvix.com...
> Hi there,
>
> since the latest build 72 for the PM RJCG the ITT in the
> turboprops displays
> correct now
>
> But for this, the RPM Display is wrong now (well working
> til the build 70!).
> See picture, it shows only 1.0 (instead of 100%)and isn,t
> adjustable by the
> RPM-factor anymore, wathever I type in?
>
> At the low position of the prop lever it shows 0.8
> (instead of 90%). What
> happened?
>
> The aircraft is the PMDG B1900D, I didn´t try another yet.
>
>
> Regards
>
> Chris



--------------------------------------------------------------------------------


>

[Christian Jungbluth]

On 1/25/2006 12:56:24 PM, Enrico Schiratti wrote:
>Ok, I forgot to multiply the
>value by 100 in the 2 and 4
>engine setting... uploaded as
>73b... thanks.


Thanks, too!

Chris