Results 1 to 3 of 3
-
01-24-2006, 03:42 PM #1Thomas RichterGuest
TCAS on pm`s ND with FSInn solved!!
Hi all,
after some long nights and a very hard job for my Harddisks (they must be
very hot and much older than before) FSInn for VATSIM is now working together
with FS2004 (and so with PM`s ND and QuickMap).
We need a special configuration on min. 2 PC`s, latest AiBridge (3.0) and a
procedure to go online.
1. PC-1 FS2004:
1.1. FSInn-Control Panel: running with FS-Start
1.2. AiBridge 3.0: starting when FSInn is started on PC-2 but NOT ONLINE (to
VATSIM)
2. PC-2:
2.1. FSInn (Panel)
2.2. Connect Framework (FSInn), this program has to be run NOT ON FS2004-PC
together with AiBridge (AiBridge will crash)
To go online FS is running:
1. Start FSInn on PC-2
2. FS shows message that FSInn is now on MP
3. Start AiBridge 3.0 on FS-PC
4. FS shows message that AiBridge is in MP
5. Connect FSInn (PC-2) to VATSIM
You will see traffic in ND and QuickMap.
If you close connection to VATSIM but FSInn and FS is still in MP-Mode, to
connect to VATSIM you have first to start AiBridge, because it is closing by
disconnecting FSInn to VATSIM.
Best Regards
Thomas Richter
-
01-25-2006, 05:40 AM #2Enrico SchirattiGuest
Re: TCAS on pm`s ND with FSInn solved!!
That sounds quite complex, does it have to do with
multiplayer connectivity or something like that?
Are the programmers aware of this?
"Thomas Richter" wrote in
message news:385970.77380@wb.onvix.com...
> Hi all,
> after some long nights and a very hard job for my
> Harddisks (they must be
> very hot and much older than before) FSInn for VATSIM is
> now working together
> with FS2004 (and so with PM`s ND and QuickMap).
> We need a special configuration on min. 2 PC`s, latest
> AiBridge (3.0) and a
> procedure to go online.
> 1. PC-1 FS2004:
> 1.1. FSInn-Control Panel: running with FS-Start
> 1.2. AiBridge 3.0: starting when FSInn is started on PC-2
> but NOT ONLINE (to
> VATSIM)
>
> 2. PC-2:
> 2.1. FSInn (Panel)
> 2.2. Connect Framework (FSInn), this program has to be run
> NOT ON FS2004-PC
> together with AiBridge (AiBridge will crash)
> To go online FS is running:
> 1. Start FSInn on PC-2
> 2. FS shows message that FSInn is now on MP
> 3. Start AiBridge 3.0 on FS-PC
> 4. FS shows message that AiBridge is in MP
> 5. Connect FSInn (PC-2) to VATSIM
> You will see traffic in ND and QuickMap.
> If you close connection to VATSIM but FSInn and FS is
> still in MP-Mode, to
> connect to VATSIM you have first to start AiBridge,
> because it is closing by
> disconnecting FSInn to VATSIM.
>
> Best Regards
> Thomas Richter
>
-
01-25-2006, 12:14 PM #3MANANDISE MarcGuest
TCAS on pm`s ND with FSInn solved!!
Hi Thomas and Enrico,
Effectively, it's quite difficult to follow the explanations of Thomas.
Thomas, do you speak about FSInn or FSCopilot for the PC 2. For AiBridge is that
on the PC 1 or 2. You don't speak about FSCopilot anyway ? What about this
software ?
Many thanks for your more explanations.
Perhaps it could be an easier solution for receiving the TCAS information in
our ND !
But, many thanks for your cogitations for us.
Best Regards
Marco
Similar Threads
-
FSinn and an ATC-module?
By jespergb in forum General Builder Questions All Aircraft TypesReplies: 0Last Post: 06-01-2010, 04:59 PM -
PFC pedals issue solved
By Shawn in forum General Builder Questions All Aircraft TypesReplies: 0Last Post: 03-30-2010, 11:32 PM -
FSINN & Squawk Modes
By riche543 in forum MyCockpit Online Flying DiscussionReplies: 5Last Post: 06-12-2009, 06:10 PM -
Yoke Problem Solved
By Michael Carter in forum My Cockpit UpdateReplies: 2Last Post: 04-25-2007, 09:56 PM
Pretty Girls from your city for night
Generic Analog Gauges