Results 1 to 3 of 3
Thread: a320 throtle
-
07-29-2010, 03:35 AM #1
- Join Date
- Mar 2010
- Location
- Croatia
- Posts
- 10
a320 throtle
Hy all my english is bad so i apologise foward for that. I would like to build an a320 throttle unit and i need all help that i can get...so my question is where can i get files for dimensions and shape of housing and sticks....and how to build reverser on that..using a potenciometer or microswitch or something else...thanks for help
-
08-01-2010, 11:01 PM #2
Re: a320 throtle
Hi Shacy. if you look in the gallery at my pics, there is quite a bit of detail on the A320TQ that I built a few years ago...
Cheers Gwyn (Westozy)
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
shacy thanked for this post
-
08-16-2010, 07:17 AM #3
- Join Date
- Mar 2010
- Location
- Croatia
- Posts
- 10
Re: a320 throtle
thanks for the pics Westozy, so my next question is how long is the path of potenciometers from full reverse to full thrust,or radius of the base, i saw the pic on the web but i dont know where and i cant find it,and the next is how to build reversers i was thinking of using spring and pin so please help me with these
Cheers to all
Similar Threads
-
Airbus A320/A340 motorised throtle quadrant
By Bartlomiej in forum General Builder Questions All Aircraft TypesReplies: 13Last Post: 12-06-2011, 05:45 AM