Results 1 to 10 of 22
Thread: Opencockpits MCP (USB) SIOC
-
02-24-2008, 02:11 PM #1
Opencockpits MCP (USB) SIOC
Hi guys,
As you can see im new here, nice to meet you all
I've started getting all the parts bit by bit in order to build my home simulator. Not so long ago I bought OpenCockpits MCP USB version, which should be plug and play etc. I have SIOC ver 3.41. Im looking to use this with Project Magenta's MCP software so I can use it in FSX with the default 737 that comes with FSX.
Im having problems at the moment with the MCP I only took it out of the box yesterday to have a play around with my toy, but I cannot for the love of me get it working. I have followed all the instructions for adding some lines in sioc.ini file also with the script I want sioc to load on runtime which would be the MCP_737.txt im sure.
When I load up SIOC and also load up FSX with FSUIPC and the PM MCP software the lights come one for about 5 seconds and then turns off again. I cant use my MCP with anything.
I've also noticed that the support on the OC site is next to none, or it's in Spanish in which i am not fluent in. I can see MyCockpits has added in a OC section for people with their hardware.
So do any of you OC guys knows what is going on or can lead my in the right way.
SIOC 3.41
FSX SP2
Projectmagenta Latest updates
FSUIPC: latest Version registered.
Thanks for the help.
-
02-24-2008, 02:23 PM #2
POst up the SIOC.ini file and a screen shot of your SIOC running.
-
02-24-2008, 02:30 PM #3
Thanks for you quick reply. Il post them now
[ fichero de configuracion para el SIOC ver. 3.41 ]
[ Configuration file for SIOC ]
[************** SIOC ***************]
[ Puerto del servidor IOCP ]
[ IOCP port ]
IOCP_port=8092
[ Tiempo de respuesta máximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=4000
[ Arranque minimizado en la barra ]
[ Start minimized in tray ]
Minimized=No
[ Retraso necesario para las variables toggles (Project Magenta)]
[ Deley needed for var. toggles (Project Magenta) ]
toggle_delay=20
[ Fichero de configuracion ]
[ Configuration File ]
CONFIG_FILE=.\MCP_737.txt
[************** IOCARDS MODULE ***************]
[ Desactivar el módulo de las IOCards ]
[ Disable IOCards module ]
IOCard_disable=No
[------------- CARDS CONFIG -------------]
[ IOCard Master ]
[...............]
[ Spanish : ]
[ MASTER=(Indice device),(Tipo),(Número de tarjetas),(Número device) ]
[ Indice Device: Índice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]
[ tipo = 0 : Emulador de Master Card ]
[ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente ]
[ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad ]
[ tipo = 3 : Placa de expansión por puerto paralelo ]
[ tipo = 4 : Tarjeta USBExpansion usada ]
[ tipo = 5 : Modulo MCP de Opencockpits ]
[ Número de tarjetas = Número de placas Master usadas, 1 a 4 para uso de placas de expansión, 1 para conexión de placa Master directa o del Emulador ]
[ Número de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Dirección del puerto paralelo (por ejemplo $037, o número de dispositivo USB ]
[ Por ejemplo para una Master conectada al puerto paralelo : ]
[ MASTER=0,1,1,$0378 ]
[ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]
[ Un ejemplo de conexión a simulador ]
[ MASTER=0,0,1,0 ]
[ English : ]
[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]
[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]
[ type = 0 : Master Card Emulator ]
[ type = 1 : Master Card connected directly to parallel port ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port ]
[ type = 3 : Expansion Card connected throught parallel port ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]
[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]
[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]
[ For example, a Master Card connected directly to parallel port : ]
[ MASTER=0,1,1,$0378 ]
[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]
[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]
[ Use the first USBExpansion card connected with only one Master Card attached ]
[ Esta definición es para usar la primera tarjeta USBExpansion que se encuentre instalada que además llevará conectada una placa Master ]
MASTER=0,5,1,0
[ Others Cards / Otras tarjetas ]
[...............................]
[ Spanish : ]
[ Nombre_de_tarjeta=(Indice device),(Número device) ]
[ Indice Device: Índice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]
[ Número de device = 0 para usar primera tarjeta USB de este tipo detectada ó número de dispositivo USB ]
[ English : ]
[ Name_of_card=(Device index),(Device number) ]
[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]
[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]
[ Ejemplo de dos USBServos en indices 0 y 1, y números de devices 17 y 23 ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]
[ USBServos=0,17 ]
[ USBServos=1,23 ]
USBStepper=0,0
USBKeys=0,0
USBServos=0,0
USBRelays=0,0
USBDCmotor=0,0
[ Para los ejes analógicos se usan los números de devices de las tarjetas donde están alojados ]
[ For analogic axles, you use the device number of cards what allow the axles ]
USBAnalogic=0,0
[************** FSUIPC MODULE ***************]
[ Desabilitar lectura de las FSUIPC ]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No
[ Refresco recepción FSUIPC ]
[ FSUIPC refresh ]
FSUipcRefresh=50
[************** IOCP CLIENTS MODULES ***************]
[ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=3000
[************** IOCP CLIENT MODULE #0 ***************]
[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient0_disable=Yes
[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient0_host=localhost
[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient0_port=8090
[************** IOCP CLIENT MODULE #1 ***************]
[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes
[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient1_host=localhost
[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient1_port=8099
[************** SOUND MODULE ***************]
[ Ficheros de sonido ]
[ Sound Files ]
[ Desactivar el módulo de sonido ]
[ Disable Sound module ]
Sound_disable=yes
[ Volumen general de los sonidos 0-100 ]
[ Master Volume 0-100 ]
Volume=100
[ put '*' first filename for loop Sound ]
[ anteponer '*' en el fichero para bucle continuo de sonido]
[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]
[ Sound=Fichero_wav,frecuencia,volumen,balance ]
[ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
[ volumen=0 hasta 100 -1=Volumen por defecto ]
[ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]
[ #1 ]
Sound=APDis.wav,-1,-1,-1
[ #2 ]
Sound=*outermk.wav,-1,-1,-1
[ #3 ]
Sound=*hello.wav
[************** KEYBOARD EMULATOR MODULE ***************]
[ Nombre exacto de la ventana donde se enviarán las teclas ]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]
window =a.txt - Bloc de notas
[ Asignación de teclas ]
[ assign youe keys ]
#1=\B\A
#2=/
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=
#45=
#46=
#47=
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88= #200=
[ End of File ]
If you need more information just ask and I'l do my best. I'm totally new to OC hardware and software. Im only familiar with Goflight products so far.
-
02-24-2008, 02:34 PM #4
OK, in your MCP_737.ssi , what device number are you using in all your assignments?
-
02-24-2008, 02:42 PM #5
Im going to sound newbish here, I haven't got a clue about this device number thing. Care to explain a little as I don't know what you mean?
// *****************************************************************************
// * Config_SIOC ver 1.97 - By Manolo Vélez - www.opencockpits.com
// *****************************************************************************
// * FileName : MCP_737.txt
// * Date : 3/4/2005
// * Ver : 1.0
// * MCP de Project Magenta de 737, usando 00 fijos para ALT y VSpeed, y - del VS mediante salida
//********************************
// INICIALIZACION
//********************************
Var 2000, Value 0
{
V2501 = 2 // COURSE
V2503 = 1 // HDG
V2504 = 10 // ALT
V2567 = 1 // 00 DEL ALT (el 00 es fijo)
V2250 = SETBIT 23 // Pone MODO IAS
V2257 = V2104 // IAS leidas en IAS temporal
V2258 = V2105 // MATH leidas en MATH temporal
V2502 = V2104 // Pone por IAS en display
}
//********************************
// ENTRADAS DESDE FSUIPC
//********************************
Var 2101, Link FSUIPC_IN, Offset $04E6, Length 2 // VS de entrada
{
L0 = V2101 // En L0 el valor leido
C0 = TESTBIT V2101 ,15 // Comprueba si es Negativo
IF C0
{
V2800 = L0 - 65536 // Si es negativo binario pasa a negativo d
}
ELSE
{
V2800 = L0 // No es negativo, deja igual dejando siemp
}
CALL V2900 // Pone valor en el display
}
Var 2102, Link FSUIPC_IN, Offset $051C, Length 2 // Indicadores MCP
{
C0 = TESTBIT V2102 ,0 // Está apagado el Display del VS ?
IF C0 // SI, entonces
{
V2554 = 0 // Quita el 00 final del display
V2500 = -999999 // Apaga resto de digitos
V2553 = 0 // Me aseguro de apagar el signo -
}
ELSE // NO, entonces
{
V2554 = 1 // Enciende los 00 del display
CALL V2900 // Pone el V/S en el display
}
}
Var 2103, Link FSUIPC_IN, Offset $04F0, Length 2 // LUCES del MCP
{
V2552 = TESTBIT V2103 ,2 // V/S
V2551 = TESTBIT V2103 ,12 // F/D
V2550 = TESTBIT V2103 ,11 // A/T
V2555 = TESTBIT V2103 ,9 // SPEED
V2556 = TESTBIT V2103 ,10 // N1
V2557 = TESTBIT V2103 ,3 // ALT HOLD
V2558 = TESTBIT V2103 ,4 // APP
V2559 = TESTBIT V2103 ,5 // VORLOC
V2560 = TESTBIT V2103 ,6 // LNAV
V2561 = TESTBIT V2103 ,7 // HDG
V2562 = TESTBIT V2103 ,8 // LVL CHG
V2563 = TESTBIT V2103 ,14 // VNAV
V2564 = TESTBIT V2103 ,0 // AP1
V2565 = TESTBIT V2103 ,1 // AP2
C0 = TESTBIT V2103 ,15 // Modo MATH o IAS ?
IF C0 // MATH MODE
{
V2258 = V2105 // Cargo valor en temporal
V2566 = 1 // Enciendo el punto decimal
CALL V2901 // Display del valor
}
ELSE // IAS MODE
{
V2257 = V2104 // Cargo valor en temporal
V2566 = 0 // Apago el punto decimal
CALL V2901 // Display del valor
}
}
Var 2104, Link FSUIPC_IN, Offset $04E0, Length 2 // IAS
{
CALL V2901 // Display del valor
}
Var 2105, Link FSUIPC_IN, Offset $04E8, Length 2 // MATH
{
CALL V2901 // Display del valor
}
//********************************
// SALIDAS A FSUIPC
//********************************
Var 2250, Link FSUIPC_OUT, Offset $5410, Length 4 // Pulsadores-I PM
Var 2251, Link FSUIPC_OUT, Offset $5414, Length 4 // Pulsadores-II PM
Var 2252, Link FSUIPC_OUT, Offset $540C, Length 2 // V/S de salida
Var 2253, Link FSUIPC_OUT, Offset $5414, Length 4 // Botones MCP
Var 2254, Link FSUIPC_OUT, Offset $0C4E, Length 2 // COURSE
Var 2255, Link FSUIPC_OUT, Offset $5408, Length 2 // HDG
Var 2256, Link FSUIPC_OUT, Offset $540A, Length 2 // ALT
Var 2257, Link FSUIPC_OUT, Offset $5406, Length 2 // IAS
Var 2258, Link FSUIPC_OUT, Offset $540E, Length 2 // MATH
//********************************
// INTERRUPTORES Y PULSADORES
//********************************
Var 2300, Link IOCARD_SW, Input 38 // Interruptor A/T
{
IF V2300 = 1 // Si está encendido
{
V2250 = TOGGLE 19 // Hago toggle del bit 19
}
ELSE
{
V2250 = TOGGLE 20 // Si apagado, toggle del bit 20
}
}
Var 2301, Link IOCARD_SW, Input 27 // Interruptor F/D
{
IF V2301 = 1
{
V2251 = TOGGLE 5
}
ELSE
{
V2251 = TOGGLE 6
}
}
Var 2302, Link IOCARD_SW, Input 52, Type P // Boton V/S
{
V2253 = CHANGEBIT 11 ,V2302 // Si pulsador encendido, bit 11 a 1, si ap
}
Var 2303, Link IOCARD_SW, Input 35, Type P // Boton SPEED
{
V2250 = CHANGEBIT 22 ,V2303
}
Var 2304, Link IOCARD_SW, Input 34, Type P // Boton N1
{
V2250 = CHANGEBIT 21 ,V2304
}
Var 2305, Link IOCARD_SW, Input 36, Type P // Boton LVL CHG
{
V2250 = CHANGEBIT 24 ,V2305
}
Var 2306, Link IOCARD_SW, Input 39, Type P // Boton HDG
{
V2250 = CHANGEBIT 25 ,V2306
}
Var 2307, Link IOCARD_SW, Input 44, Type P // Boton ALT HOLD
{
V2250 = CHANGEBIT 30 ,V2307
}
Var 2308, Link IOCARD_SW, Input 37, Type P // Boton APP
{
V2250 = CHANGEBIT 29 ,V2308
}
Var 2309, Link IOCARD_SW, Input 53, Type P // Boton VORLOC
{
V2250 = CHANGEBIT 28 ,V2309
}
Var 2310, Link IOCARD_SW, Input 45, Type P // Boton LNAV
{
V2250 = CHANGEBIT 27 ,V2310
}
Var 2311, Link IOCARD_SW, Input 49, Type P // Boton VNAV
{
V2250 = CHANGEBIT 26 ,V2311
}
Var 2312, Link IOCARD_SW, Input 50, Type P // Boton DISENGAGE
{
IF V2312 = 0
{
V2253 = TOGGLE 8 // Si apago pongo el bit a 0
}
ELSE
{
V2253 = TOGGLE 9 // Si está encendido, pongo el BIT a 1
}
}
Var 2313, Link IOCARD_SW, Input 62, Type P // Boton AP1
{
V2253 = CHANGEBIT 0 ,V2313
}
Var 2314, Link IOCARD_SW, Input 58, Type P // Boton AP2
{
V2253 = CHANGEBIT 1 ,V2314
}
Var 2315, Link IOCARD_SW, Input 40, Type P // Boton MATH
{
V2250 = CHANGEBIT 23 ,V2315
}
//********************************
// ROTARY-ENCODERS
//********************************
Var 2400, Link IOCARD_ENCODER, Input 55, Aceleration 6 // Encoder VS
{
L0 = V2400 * 100 // Incrementa de 100 en 100
V2800 = ROTATE -9000 ,9000 ,L0 // Suma o resta del valor temporal de V/S
IF V2800 < 0 // Si temporal V/S es negativo
{
V2252 = V2800 + 65536 // pasa a binario negativo.
}
ELSE
{
V2252 = V2800 // Si no, deja igual pasando el valor al PM
}
}
Var 2401, Link IOCARD_ENCODER, Input 31, Aceleration 6 // Encoder COURSE
{
V2501 = ROTATE 0 ,359 ,V2401 // Roto el valor del COURSE
}
Var 2402, Link IOCARD_ENCODER, Input 28, Aceleration 6 // Encoder IAS Y MATH
{
C0 = TESTBIT V2103 ,15 // Indicador MATH o IAS ?
IF C0 // MATH MODE
{
V2258 = LIMIT 25 ,95 ,V2402 // Inc o decremento el valor del MATH
}
ELSE
{
V2257 = LIMIT 0 ,340 ,V2402 // Inc o decremento el valor del IAS
}
}
Var 2403, Link IOCARD_ENCODER, Input 41, Aceleration 6 // Encoder HDG
{
V2503 = ROTATE 0 ,359 ,V2403
}
Var 2404, Link IOCARD_ENCODER, Input 46, Aceleration 6 // Encoder ALT
{
V2504 = LIMIT 0 ,500 ,V2404
}
//********************************
// DISPLAYS 7 SEGMENTOS
//********************************
Var 2500, Link IOCARD_DISPLAY, Digit 12, Numbers 2 // VS
Var 2501, Link IOCARD_DISPLAY, Digit 0, Numbers 3 // COURSE
{
V2254 = V2501 // Pasa el valor al PM
}
Var 2502, Link IOCARD_DISPLAY, Digit 3, Numbers 3 // IAS Y MATH
Var 2503, Link IOCARD_DISPLAY, Digit 6, Numbers 3 // HEADING
{
V2255 = V2503 // Pasa el valor al PM
}
Var 2504, Link IOCARD_DISPLAY, Digit 9, Numbers 3 // ALT
{
V2256 = V2504 // Pasa el valor al PM
}
//*************************************
// SALIDAS DE LA MASTER (LEDS Y FIJOS)
//*************************************
Var 2550, Link IOCARD_OUT, Output 29 // Led A/T
Var 2551, Link IOCARD_OUT, Output 19 // Led F/D
Var 2552, Link IOCARD_OUT, Output 38 // Led del boton V/S
Var 2553, Link IOCARD_OUT, Output 36 // Signo - del display V/S
Var 2554, Link IOCARD_OUT, Output 35 // 00 del VS
Var 2555, Link IOCARD_OUT, Output 17 // Led SPEED
Var 2556, Link IOCARD_OUT, Output 18 // Led N1
Var 2557, Link IOCARD_OUT, Output 26 // Led ALT HOLD
Var 2558, Link IOCARD_OUT, Output 25 // Led APP
Var 2559, Link IOCARD_OUT, Output 23 // Led VORLOC
Var 2560, Link IOCARD_OUT, Output 24 // Led LNAV
Var 2561, Link IOCARD_OUT, Output 22 // Led HDG
Var 2562, Link IOCARD_OUT, Output 21 // Led LVL CHG
Var 2563, Link IOCARD_OUT, Output 20 // Led VNAV
Var 2564, Link IOCARD_OUT, Output 34 // Led AP1
Var 2565, Link IOCARD_OUT, Output 30 // Led AP2
Var 2566, Link IOCARD_OUT, Output 28 // Led . DECIMAL
Var 2567, Link IOCARD_OUT, Output 27 // 00 del ALT
//********************************
// VARIABLES IOCP INTERNAS
//********************************
Var 2800 // Valor temporal del V/S
//********************************
// RUTINAS INTERNAS
//********************************
Var 2900, Link SUBRUTINE // Pinta V/S
{
C0 = TESTBIT V2102 ,0 // Comprueba si deben de estar apagados
C0 = NOT C0
IF C0 // Sólo en el caso de estar encendidos
{
IF V2800 < 0 // Si V/S es negativo, pasa a positivo
{
L0 = ABS V2800
V2553 = 1 // Enciendo el signo -
}
ELSE
{
V2553 = 0 // Apago el signo -
L0 = V2800
}
V2500 = L0 / 100 // Manda el valor ajustado de V/S a display
}
}
Var 2901, Link SUBRUTINE // Pinta IAS / MATH
{
C0 = TESTBIT V2103 ,15 // Modo MATH o IAS ?
IF C0 // MATH MODE
{
V2502 = V2105 // Pone valor MATH en el display
}
ELSE
{
V2502 = V2104 // Pone valor IAS en el display
}
}
-
02-24-2008, 02:54 PM #6
I you notice on your SIOC display, it shows IDX=0 0 is the device number
Uograde to SIOC 3.5, also download the SIOC INI set-up program. Run the INI set-up program then run SIOC 3.5. Click on the config tab, in the config program, double chack ALL inputs have the device number correctly shown/assigned.
-
02-24-2008, 02:58 PM #7
Ok, I will do this now. Thanks ever so much in helping me out
-
02-24-2008, 03:33 PM #8
Can I ask, but which part of these lines of code in the config shows the Device number because I cant see it anywhere, or its probably right in front of my eyes I just can see it.
-
02-24-2008, 03:41 PM #9
When you open the Config_SIOC, you double click on any of the "INPUTS", that opens the parameter window. On that window you will see a box labeled 'Dispositivo" put the device number in that box. Save your file and reload SIOC
-
02-24-2008, 06:07 PM #10
Thanks for your help on this MCP, I have done everything you stated.
That config ini program is quite neat, theres a selection under master for my MCP which is what I selected. I then gave it an IDX number of 3. saved and reloaded, Now i can see my my device in there. I then followed into the config part and in putted the IDX number into every command that it showed under Dispositivo, Saved, reloaded and the displays and lights flashed and then back to nothing.
I wonder am I missing something. I cant contact OC about this because their support isn't any good for English spoken people.
Similar Threads
-
SIOC & Opencockpits Radios......
By oal331 in forum OpenCockpits General DiscussionReplies: 5Last Post: 10-09-2015, 06:59 AM -
Opencockpits EFIS and SIOC
By Geremy Britton in forum Computer Hardware SetupReplies: 6Last Post: 09-13-2010, 09:52 AM -
Gables Transponder working with OpenCockpits and SIOC
By LH784 in forum My Cockpit UpdateReplies: 0Last Post: 06-08-2010, 11:16 AM -
PnP SIOC scripts for Opencockpits Modules/Panels and the Level-D 767
By kiek in forum OpenCockpits General DiscussionReplies: 0Last Post: 06-06-2010, 12:35 PM -
Configure MCP of Opencockpits with MCP of Project Magenta and file sioc. Help me.
By paoloj in forum OpenCockpits General DiscussionReplies: 3Last Post: 08-15-2008, 03:29 AM
Prettys Womans from your city for night
A320 Sound Files Missing