Results 1 to 10 of 10
  1. #1
    1000+ Poster - Fantastic Contributor Tomlin's Avatar
    Join Date
    Nov 2005
    Location
    Waycross, GA
    Posts
    1,025
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    N1 Lag- PMRJ software

    Okay, I know this was discussed a bit over the last week or so, but I wanted to post this here since it's my issue and I dont want to hijack another thread.

    I know that many will think that Ive had the issue that Im about to describe, but I really honestly do think that it's only recently began.

    Issue: After pressing Shift-F4 to get the fuel available, I hit the START button for my engine(s) and at FIRST N1 starts showing an increase in percentage, but then immediately drops to a value of Zero, BUT N2 is still rising, and as it reaches 20.5%, it lights off, and then N1 will slowly start spooling up.

    Seriously- this has only started recently. It's just that I noticed it more after the other thread. Do you think that if it was a network lag issue, that N2 wouldnt rise upon holding the start switch and N1 would be static?
    Eric Tomlin-
    Learjet 45 Builder
    www.flightlevel180.org

  2. #2
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi Tomlin

    First make sure this lines are not in your Type file

    N1StartupDelay=20
    N2StartupDelay=40
    N1Init=3.3
    N1Stable=23.7
    N2Stable=55.0


    I think it's not needed to describe them !

    The second thing is that every time the thinking is there that the dog is moved by its tail.

    1/ WideServer reads informations from FS
    2/ WideServer sends this Informations to the Network
    3/ the Network transports this Informations to other PC's
    4/ WideClient reads from the Network the Informations
    5/ PM reads from WideClient the Informations

    If the server is overloaded on step 2, you will not see any changes on step 5 !!
    So if something is not or only with a lag displayed on the Client, check the Head of the dog, not the tail
    Regards
    Thomas

  3. #3
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,221
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Awesome analogy Thomas,

    Makes perfect sense.
    ________________________
    Trevor Hale

  4. #4
    1000+ Poster - Fantastic Contributor Tomlin's Avatar
    Join Date
    Nov 2005
    Location
    Waycross, GA
    Posts
    1,025
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thomas, everybody- thanks for your reply friend. I have been in overdrive trying to get my sim ready for our own mini charity event coming up in less than two weeks.

    I will try your suggestion and see what happens. I wonder why it would have started doing this on its own?

    When you say to insure that those lines are NOT in the file, do I just delete them, or change the values?

    Thanks,
    Eric Tomlin-
    Learjet 45 Builder
    www.flightlevel180.org

  5. #5
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    This lines are needed to "simulate" a slower start sequence, IF NEEDED.
    But they have only effect on Eng Start.

    Sometimes an Window Update is doing something you don't know and suddenly those things happen.
    E.g. some years ago I use Opencockpit cards and suddenly I had problems that the cards were not recognized by Win XP Pro. A lot of people had the same problem, started all with some Windows Updates. I had to use a seperate USB card for the PC to get all back.
    That's the mysterious Windows!

    Because we can ONLY read/write what is possible to read/write over the network.
    And the best indication that it is a Network problem is EVER when the problem starts after some minutes, then the Data is in Network Buffer and it's starting to get a lag.

    People starts ever with changing their settings on software and belief to get better results, but this only can then happen if you take some load from the Network with this settings. But this again is then the indication that the problem lies on the Network.
    The interpreting is most wrong.
    Regards
    Thomas

  6. #6
    1000+ Poster - Fantastic Contributor Tomlin's Avatar
    Join Date
    Nov 2005
    Location
    Waycross, GA
    Posts
    1,025
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Okay, so just delete them if they are in there...?
    Eric Tomlin-
    Learjet 45 Builder
    www.flightlevel180.org

  7. #7
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Yes, I never used them. I control this settings by changing the ???.air file itself.
    I think this lines are from older FS times still available and just confuse one or the other user.
    Regards
    Thomas

  8. #8
    1000+ Poster - Fantastic Contributor Tomlin's Avatar
    Join Date
    Nov 2005
    Location
    Waycross, GA
    Posts
    1,025
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Wink

    THanks! I appreciate the quick help.
    Eric Tomlin-
    Learjet 45 Builder
    www.flightlevel180.org

  9. #9
    150+ Forum Groupie michelmvd's Avatar
    Join Date
    Nov 2005
    Location
    Oostende - Belgium
    Posts
    222
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi Thomas,

    Quote Originally Posted by EW321 View Post
    Yes, I never used them. I control this settings by changing the ???.air file itself.
    .

    Can you direct my to which sections I have to go, in order to do that in the airfile.
    I would like to adapt the N1 / N2 / EGT spoil up time.

    Many thanks for your appreciated help

    B. Rgds
    Michel
    _______________________________________________
    Michel VANDAELE
    msn : michelmvd@hotmail.com
    website B744 : users.telenet.be/michel.vandaele/sim1.htm
    general website : users.telenet.be/michel.vandaele
    my spaces: http://michelmvd.spaces.live.com/
    email : michelmvd@hotmail.com

  10. #10
    150+ Forum Groupie
    Join Date
    Dec 2006
    Location
    Ireland
    Posts
    255
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Sorry, but this is not one or two settings. The air file ist NOT the Aicraft.cfg file, it is a binary file that handles FS internal Offsets and very complex 2/3 dimensional curves they work "hand in hand". A wrong setting can give you a unflyable A/C. That's why many A/C's use still the same (or nearly) air file.
    Regards
    Thomas

Similar Threads

  1. PMRJ Wish
    By Marc Nieuwhof in forum PM General Q & A
    Replies: 1
    Last Post: 01-16-2006, 05:34 AM
  2. PMRJ, Build 70
    By Elisio Cruz in forum PM General Q & A
    Replies: 6
    Last Post: 01-10-2006, 11:38 AM
  3. PMRJ, Build 70
    By Elisio Cruz in forum PM General Q & A
    Replies: 1
    Last Post: 01-09-2006, 12:46 PM
  4. pmRJ Questions
    By Richard Lester in forum PM General Q & A
    Replies: 1
    Last Post: 02-01-2005, 12:31 PM
  5. pmRJ 48b
    By Thomas Richter in forum PM General Q & A
    Replies: 2
    Last Post: 11-21-2004, 04:11 PM