Results 1 to 10 of 44
-
09-15-2007, 02:56 PM #1
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
NEW latest default 737 logic file
Hi all,
this is the latest default 737 logic file.
- Extern Power available is changed
available by pmInstructor
or
available
- if Parkbrake is set
- both Engines are OFF
- Beacon is OFF
- Recall function for Sixpack added
- new Button for Recall
- if you press Recall all Sixpack lights will lit for 1.5 seconds
- then they go OFF and all Malfunctions will lit for 6 seconds
- then it goes back to normal display
- if you press in the range of the 6-second displaying the Recall button
again, the Remembered Malfunctions are deleted.
If you use hardware for the Sixpack display you need to use the following Offsets to display.
5540 .0 SixPackFireDisp
5540 .2 SixPackFltContDisp
5540 .3 SixPackElecDisp
5540 .4 SixPackIRSDisp
5540 .5 SixPackAPUDisp
5540 .6 SixPackEngDisp
5541 .0 SixPackAntiIceDisp
5541 .1 SixpackAirCondDisp
5541 .2 SixPackHydDisp
5541 .3 SixPackFuelDisp
5541 .4 SixpackOverheadDisp
5541 .5 SixPackDoorsDisp
You can download this file in Download section
http://mycockpit.org/forums/downloads.php?do=cat&id=9Last edited by Thomas Richter; 09-16-2007 at 09:08 PM. Reason: File moved to Download section
Regards
Thomas
-
09-15-2007, 05:49 PM #2
Hi Thomas.. Master caution and Master warning? Are they working perfectly?
________________________
Trevor Hale
-
09-16-2007, 12:38 AM #3
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
Hi Trevor
I didn't change the system itself, just added the described function that has been missing.
Perfect ??
Who or what is perfect? All done by humans, so ...Regards
Thomas
-
09-16-2007, 09:11 AM #4
LOL, Well perfect is in the eyer of the beholder then isn't it
________________________
Trevor Hale
-
09-16-2007, 10:23 AM #5
- Join Date
- Feb 2007
- Location
- Brazil
- Posts
- 80
Hi Thomas,
Any chance to make this new itens to work with PMDG air files and CPFLIGHT MIP737 hardware?
Regards,
Carlos
-
09-16-2007, 11:28 AM #6
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
I don't know the Offsets CPFlight uses for their MIP to display the sixpacks.
Do you?Regards
Thomas
-
09-16-2007, 12:01 PM #7
- Join Date
- Feb 2007
- Location
- Brazil
- Posts
- 80
Will ask Claudio or Paolo from CPFLIGHT and will report you as soon they return me something about that, ok
-
09-16-2007, 12:06 PM #8
- Join Date
- Dec 2006
- Location
- Ireland
- Posts
- 255
I think normally that should be this ones
5540 .0 SixPackFireDisp
5540 .2 SixPackFltContDisp
5540 .3 SixPackElecDisp
5540 .4 SixPackIRSDisp
5540 .5 SixPackAPUDisp
5540 .6 SixPackEngDisp
5541 .0 SixPackAntiIceDisp
5541 .1 SixpackAirCondDisp
5541 .2 SixPackHydDisp
5541 .3 SixPackFuelDisp
5541 .4 SixpackOverheadDisp
5541 .5 SixPackDoorsDispRegards
Thomas
-
09-16-2007, 12:18 PM #9
- Join Date
- Feb 2007
- Location
- Brazil
- Posts
- 80
Any change to try with this ones that you reported below? Can you implement it to the last files used for PMDG files (i think is 1051) to test it? I could check if it works if you send me the file with this new itens.
By the way i have sent e-mail to Paolo anking him if they use the same offsets that you answered on your last post....
-
09-16-2007, 12:23 PM #10
- Join Date
- Feb 2007
- Location
- Brazil
- Posts
- 80
Just one thing, i am using your last file to use PMDG air files and SIXPACKS works perfecty with cpflight hardware, so i think that will work if you just update the pmsys1051 file with the new improvements isn't it? or i am wrong?
Similar Threads
-
777 logic file?
By sbecker777 in forum PMSystemsReplies: 7Last Post: 10-18-2018, 02:07 PM -
A320 logic file
By luisgordo in forum PMSystemsReplies: 2Last Post: 12-21-2010, 04:23 PM -
Wrong path flag for default scenery file
By SKYWARRIOR in forum FSX Scenery DiscussionReplies: 1Last Post: 06-22-2010, 03:21 PM -
[LOGIC] Center logic 0 Three position toggle switch
By null null in forum PM General Q & AReplies: 2Last Post: 11-24-2004, 04:42 PM
Pretty Girls from your city for night
Generic Analog Gauges