A320 FMGS B50

[tcane]

Did you clear the active code twice before trying to enter a new code?

Hi Jeehell and thx for your reply!
Check, this solves the problem for the push buttons! Thanks!
But have another problem with the switches. For example the STBY/AUTO/ON switch, has in the genius version only one input for ON. Do you have maybe a fix for that, that i can also turn off if the switch not in On position? The same is with the ALT RPTG.
thanks in advance
Florian

[jeehell]

There are many different XPDR panel versions on the 320 family.
You can use the model you have simply enough. You jsut need to cheat it a little bit for example with the STBY/AUTO/ON, you can transform it to AUTO/ON this way in FMGS Config:

1. ON Switch:
   
   • declare the push action as : XPDR ON with push event
   • do not declare any release action.
   
   
2. AUTO Switch:
   
   • declare the push action as : XPDR AUTO with push event
   • do not declare any release action.

[tcane]

There are many different XPDR panel versions on the 320 family.
You can use the model you have simply enough. You jsut need to cheat it a little bit for example with the STBY/AUTO/ON, you can transform it to AUTO/ON this way in FMGS Config:

1. ON Switch:
   
   • declare the push action as : XPDR ON with push event
   • do not declare any release action.
   
   
2. AUTO Switch:
   
   • declare the push action as : XPDR AUTO with push event
   • do not declare any release action.

Hi Jeehell,
thanks again for your great support!
Unfortunately I still do not quite understand the logic behind Push / Release and Toggle in your software but anyway...
How can I declare an action for AUTO Switch if there's no Joystick Input? Normally you have to push first an button on the Joystick and assign then an action?
Thanks in advance for your help!
Florian

[jeehell]

Hi Jeehell,
thanks again for your great support!
Unfortunately I still do not quite understand the logic behind Push / Release and Toggle in your software but anyway...
How can I declare an action for AUTO Switch if there's no Joystick Input? Normally you have to push first an button on the Joystick and assign then an action?
Thanks in advance for your help!
Florian

you can also do:

1. ON Switch:
   
   • declare the push action as : XPDR ON with push event
   • declare the releaseaction as : XPDR AUTO with push event
   
   
   
2. AUTO Switch:
   
   • do not declare any push action.
   • do not declare any release action.

[tcane]

Hi Jehell,

Perfect!!! This solution works very nice! Big thank you for your help!

[Leonidas]

Hi
Very often about 50% of flights, after full flaps the flaps sound doesn't stop and this is very annoying during landing. It stops only after flaps retraction usually at taxiways.
Anyone else with this?
Regards

[startrail]

Hi
Very often about 50% of flights, after full flaps the flaps sound doesn't stop and this is very annoying during landing. It stops only after flaps retraction usually at taxiways.
Anyone else with this?
Regards

I had this problem before. I guess it originates from the Sim Aircraft Sound folder . Try changing the aircraft sound set and see if the problem is solved.


Couple of weeks ago I changed the sound set and this problem returned so I reverted back to the one working.



Regards

Mike

[romeow]

As an aside I was told you can't hear any flaps sound sitting in a real Airbus cockpit.

[Rafape]

Hi.


How can I move the labels in the display mcdu? The lines I move with the buttons, but I can not find how to move the labels. Thank's! you!

[Leonidas]

Hi.
How can I move the labels in the display mcdu? The lines I move with the buttons, but I can not find how to move the labels. Thank's! you!

I think you can't...