Sioc creator hanging

[starefly]

Hello Guys,

I definitively need some help with SIOC creator.... I passed several hours trying to find a solution to setup a custom MCDU using an USBkey card with no success... SIOC creator is hanging while hitting start configuration.
I have done several re-installation modification in files, but nada.... It worked 2 or 3 times but hang again without modifying anything....

My setup:
Windows 10 Pro
C:\SIOC
C:\A320FMGS
IP:192.168.1.15 - Port 8092
Single usb key connected (trying to make simple for first shot)
Kaspersky KIS (disabled to ensure issue is not coming from there)

Sioc .ini:
Name=MAIN_SIOC
IOCP_port=8092
IOCP_timeout=3500
Minimized=No
Toggle_delay=20
Config_File=C:\SIOC\JeeHellWare.ssi
Vdevices_enable=No
Vdevices_wait=2000
Vdevices_slave=No
Vdevices_host=192.168.1.15
Vdevices_port=8092
Monitor_disable=No
Monitor_time=2
IOCard_disable=No
Divisor_AD=10
FSUipcdisable=No
FSUipcRefresh=50
IOCPini_delay=0
IOCPclient0_disable=Yes
IOCPclient0_host=LOCALHOST
IOCPclient0_port=8099
IOCPclient1_disable=Yes
IOCPclient1_host=LOCALHOST
IOCPclient1_port=8099
Sound_disable=Yes
USBKeys=0,8

JeeHellWare.txt:
Var 1, name key, Link USB_KEYS, Device 0

ConfigUSBkeys.txt:
Var 0001, name key, Link USB_KEYS, Device 0
IOCKeys.ini:
MUSB=No
MUSB=No
deviceUSB=2048
IOCP_host=localhost
IOCP_port=8092
IOCP_timeout=4000
IOCP_Ini_Var=1

In SIOC creator (usbkey card connected):
General tab: Localhost - port 8092 - C:\SIOC\
MCDU tab: use MCDU - On same computer - IDX 0
-> Then apply conf
-> Start configuration
-> Pop up : "Before continuing blablabla close SIOC & IOCKEYS" -> Done & checked
-> Hit "OK" : then soft "HANG" and need to kill process

Card is working well in SIOC, FMGS is working with FSX, but cannot get SIOC creator working correctly.... Re-installed on other drives (but similar computer), no succes either....

Any advice ? It would be warmly welcome .

Tks,

Marc

[jeehell]

you do not need IOCKEYs (and must not run it) on a local computer with an USB key card on a local network. It might be your problem.

[starefly]

Bonjour,

Thanks for your suggestion, I have no IOCKeys.exe on my computer (everything is on local).
How can I check that ? Where should it be installed/configured ?

I just gave a try on another computer and I'm facing similar behaviour ; so I think it is not computer related but more linked to configuration... but from where...

Merci,

Marc

[jeehell]

Sorry for late reply.

I cannot think of anything here...
Please make sure again all firewalls and antivirus are disabled.

[Cabanero]

Hello Marc,

i have now the same problem like you with version B49.2. Is your problem solved? Can you tell me what to do?


Tanks, Timo

Hello Guys,

I definitively need some help with SIOC creator.... I passed several hours trying to find a solution to setup a custom MCDU using an USBkey card with no success... SIOC creator is hanging while hitting start configuration.
I have done several re-installation modification in files, but nada.... It worked 2 or 3 times but hang again without modifying anything....

My setup:
Windows 10 Pro
C:\SIOC
C:\A320FMGS
IP:192.168.1.15 - Port 8092
Single usb key connected (trying to make simple for first shot)
Kaspersky KIS (disabled to ensure issue is not coming from there)

Sioc .ini:
Name=MAIN_SIOC
IOCP_port=8092
IOCP_timeout=3500
Minimized=No
Toggle_delay=20
Config_File=C:\SIOC\JeeHellWare.ssi
Vdevices_enable=No
Vdevices_wait=2000
Vdevices_slave=No
Vdevices_host=192.168.1.15
Vdevices_port=8092
Monitor_disable=No
Monitor_time=2
IOCard_disable=No
Divisor_AD=10
FSUipcdisable=No
FSUipcRefresh=50
IOCPini_delay=0
IOCPclient0_disable=Yes
IOCPclient0_host=LOCALHOST
IOCPclient0_port=8099
IOCPclient1_disable=Yes
IOCPclient1_host=LOCALHOST
IOCPclient1_port=8099
Sound_disable=Yes
USBKeys=0,8

JeeHellWare.txt:
Var 1, name key, Link USB_KEYS, Device 0

ConfigUSBkeys.txt:
Var 0001, name key, Link USB_KEYS, Device 0
IOCKeys.ini:
MUSB=No
MUSB=No
deviceUSB=2048
IOCP_host=localhost
IOCP_port=8092
IOCP_timeout=4000
IOCP_Ini_Var=1

In SIOC creator (usbkey card connected):
General tab: Localhost - port 8092 - C:\SIOC\
MCDU tab: use MCDU - On same computer - IDX 0
-> Then apply conf
-> Start configuration
-> Pop up : "Before continuing blablabla close SIOC & IOCKEYS" -> Done & checked
-> Hit "OK" : then soft "HANG" and need to kill process

Card is working well in SIOC, FMGS is working with FSX, but cannot get SIOC creator working correctly.... Re-installed on other drives (but similar computer), no succes either....

Any advice ? It would be warmly welcome .

Tks,

Marc

[jeehell]

I do not believe this is a problem coming from my software, but rather configuration of your PC.
Check you run everything with admin rights, firewall off, antivirus off, etc..

[Cabanero]

Thanks for your answer. Everything is off and I have full admin rights. I have windows 10. I also have a Radio Panel with opencockpits. This works fine. Only when I will config my mcdu it's going to hang and I must kill the process.

[starefly]

Thanks for your answer. Everything is off and I have full admin rights. I have windows 10. I also have a Radio Panel with opencockpits. This works fine. Only when I will config my mcdu it's going to hang and I must kill the process.

Hello,

Initial I declared the card in main SIOC interface, but something was generating a problem. If jehehell & SIOC re installed, and launching jeehell SIOC config tool it worked without hanging. There was a kind of conflict between SIOC and jeehell tool, I don't what, but it worked...

Cheers

[Cabanero]

Ok. Well, i have now reinstalled everything again. SIOC and Jeehell.The same problem again. Other ideas?

[Buddym]

Thank you. I used this thread to get my MCDU working as well. My issue was that SIOC Creator wouldn't run because SIOC was installed in the c:\Programs Files (x86) folder. I removed and installed it into c:\IOCARDS\SIOC and then it worked perfectly.