A320 FMGS B47

[OmniAtlas]

I promise to test EKCH and YSSY.

YSSY is a stock Airport in my sim and on both Airports I have the same Problem.

I have now tested in fsscenery.cfg to set the path for FSX as: -FSroot:"C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X" but this doesn't work too.

And the Screenshots from EDDM. If the ILS is on center, the Aircraft is on the left side.


Omni, is it possible you use the line "monitorARPT=EDDM" in your FSscenery.cfg and test with this?

Regards Dieter

I will see if I can catch up over the weekend and do some testing -- trying to figure out ARINC 429 at this stage

Make sure your magnetic variation is updated.

I haven't messed with FSscenery.cfg -- in fact, I don't really know what it does.

[jeehell]

Probably wise to do all the navigation updates from Sors website, but the only one I've done is the Magnetic Variation (to save time) - http://www.aero.sors.fr/navaids.html

Hopefully with P3D V4 this will be updated.

I thought I had said it somewhere already.

It is USELESS to do the magnetic variation update, at least in regards to my software. I do all the magnetic variation computations myself in the application, not using the variable from FS/P3D.

The ONLY update which is useful is the ILS/RWY update.

[dkreiskott]

Hi Jean Luc,

I have installed FMGS Server on the FSX PC too.
Thats the result, I think looks good.

*19:11:29* Navdata module launched Server
*19:11:29* No Navdata1: copying new dataset to Navdata2 as well
*19:11:29* New Data set available
*19:11:29* Copying Navdata1 to Navdata2
*19:11:29*
*19:11:29* -BGL scan:
*19:11:29* -ScenerycfgPath:C:\ProgramData\Microsoft\FSX\scenery.cfg
*19:11:29* -FSroot:C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\
*19:11:30* -Folders Nb:289
*19:12:03* -FS ILS Nb:5054
*19:12:51* -Monitoring:EDDL
*19:12:51* -IDSE layer:320
*19:12:51* -IDNE layer:320
*19:12:51* -IDNW layer:320
*19:12:51* -IDSW layer:320
*19:12:51* -IDSE layer:54
*19:12:51* -IDSW layer:54
*19:12:51* -IDNE layer:54
*19:12:51* -IDNW layer:54
*19:12:51* -Total ILS in FS for EDDL: 8
*19:12:51* -Total ILS in Navdata for EDDL: 4

Now I have another question. Needs FMGS Server (on the dedicated Server) the Navdata or is it only importend for the clients?

Regards Dieter

[dkreiskott]

Hi Leonidas,

I use the ILS Tool from Hervé Sors as Jean Luc suggest.
For me all ILS in EKCH works correct.

Thanks JL

[OmniAtlas]

I thought I had said it somewhere already.

It is USELESS to do the magnetic variation update, at least in regards to my software. I do all the magnetic variation computations myself in the application, not using the variable from FS/P3D.

The ONLY update which is useful is the ILS/RWY update.

Its for other software - I haven't run into too much of a problem with fmgs (do minimal flying now a days). J will update ILS/ RWY.

Merci

Ben

[Leonidas]

Hi Leonidas,
I use the ILS Tool from Hervé Sors as Jean Luc suggest.
For me all ILS in EKCH works correct.
Thanks JL

I run it too, but ILS at 4L not corrected. Maybe I had to try it after reboot. Anyway, I didn't spend more time about it the day P3D v.4 is arriving.
Thanks Dieter

[sstusek]

found the solution!
video drivers were not responsible.
windows update on client made the trick! i have not being updating its win7 for LONG time
thx to all
fil

Hi,

None of the windows or graphic updates worked for my ND client setup! Any way, yesterday I finally found the ND route "error" solution. This time I was focused only on network. I tried many things related to network and home group settings but nothing helped?! Why it was working before version B47.1 ... then I remembered, I installed the wireless USB adapter to make auto updates! I uninstalled the driver and after restart ND finally started working, now I can see the green route line again .
I hope this might help anyone else with similar network problem.

I also have a question regarding weather radar and hardware use. I guess it is not high on priority list but I am wondering if some sort of hardware interface for radar panel is planed (FSUIPC, SIOC creator, joystick buttons)? Thanks.

Cheers,
Simon

[Leonidas]

Hi
I've installed P3D v.4 in a new PC with last FMGS for v.3.4 just for a test and despite FMGS addons appears in P3D menu, is says "FMGS server not connected". Is there something easy to configure or should I wait for FMGS update?
Regards

[jeehell]

you might need to configure simconnect.xml manually.
It does work, I tested... only simpatcher is not compatible.

[Leonidas]

you might need to configure simconnect.xml manually.
It does work, I tested... only simpatcher is not compatible.

Thanks JL, but I can't find it. Where could I find simconnect and what configuration need for this?