A320 FMGS B31

[Space]

@Jeehell: what did i wrong?
"XXXX" is on MCDU.
Do have a nacrecord.dat file (66.332kb) in the navdata Folder.

That is my logndb:
*18:49:01* NavDBapp Launched
*18:49:03* RootPath=C:\A320FMGS\Navdata\
*18:49:03* Thread1 launched
*18:49:03* -BGL scan:
*18:49:03* -ScenerycfgPath:C:\ProgramData\Microsoft\FSX\scenery.cfg
*18:49:03* -FSroot:C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\
*18:49:04* Thread2 launched
*18:49:04* C:\A320FMGS\Navdata\navdata2\\navrecord.dat does not exist
*18:49:04* Server init OK
*18:49:04* -Folders Nb:123
*18:49:30* -FS ILS Nb:3462
*18:49:30* C:\A320FMGS\Navdata\navdata1\\navrecord.dat does not exist
*18:49:31*
*18:49:31* NavDB1 failed at:
*18:49:31* Server closed
*18:49:31* FAIL
*18:49:31*
*18:49:31* ****
*18:49:31* RootPath=C:\A320FMGS\Navdata\
*18:49:31* Thread1 launched
*18:49:31* -BGL scan:
*18:49:31* -ScenerycfgPath:C:\ProgramData\Microsoft\FSX\scenery.cfg
*18:49:31* -FSroot:C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\
*18:49:31* Thread2 launched
*18:49:31* C:\A320FMGS\Navdata\navdata2\\navrecord.dat does not exist
*18:49:31* Server init OK
*18:49:31* -Folders Nb:123
*18:49:32* -FS ILS Nb:3462
*18:49:32* C:\A320FMGS\Navdata\navdata1\\navrecord.dat does not exist
*18:49:40* quit

[jeehell]

Hi

To have the network running, you just need to set up the software correctly during installation (IP address of the Server PC, I really suggest you leav the default ports).
Then run FSXstarter or starter software (depending on the version of FS you use).
Also, it is CRITICAL to only install ONLY what is required on each computer. NEVER install the server on a client PC.
Your firewall also must be set to allow external connection on the network.

Regards,
JL

[jeehell]

Space: you don't have the navdata installed in the correct folders. Either Aerosoft installer failed, or you changed the path to which it should put the data. Make sure you get the navrecord.dat file from Aerosoft in both C:\A320FMGS\Navdata\navdata1 and C:\A320FMGS\Navdata\navdata2 folders.

JL

[alotfont]

Thank you very much JL!!, its working now... sorry , it was a silly mistake!! I love your Software!! its amazing!,

Andrès

[filippoporcari]

after your suggestion i can now start p3d first then fmgs and the navdata are there!
thanks a lot JL
fil

[jeehell]

Hi All,

If you can get VOR/NDB/ARPT/WPT display on remote ND do the following:
1) on your ND PC, navigate to the FMGS\Navdata folder
2) There you have a file called FSScenery.cfg
3) Add the following line if it's not already there:
IP=XXX.XXX.XXX.XXX
Where XXX.XXX.XXX.XXX is of course the IP opf your main FMGS cServe computer. Of course, if the line exists, check it's the correct IP.


Regards,
JL

[Leonidas]

Hi to all
After last live update the first 4 out of 5 issues I've mentioned at #54 are solved! The 5th remains, but without any incidence in FCU functionality.
I don't know if another user write it, but the A/C banks left and right when Ι try to land with AP-APR, even if I engage both APs.
Regards

[tom19]

I don't know if another user write it, but the A/C banks left and right when Ι try to land with AP-APR, even if I engage both APs.

I have same issue when landing with ILS...

Tommi

[Leonidas]

I have same issue when landing with ILS...
Tommi

After last update this dissapeared, but the clients don't shut down after server, reapeared...
Regards

[Space]

Hi Jeehell,
Now Network is running, MCDU shows the correct EIRAC and i can program the route. But the ND doesn`t show that, also ARPT, NDB etc is not diplayed. he fscenery.cfg sho the correct IP of my Server. ND runs on a Client.

What do i wrong?