FSBUS flashing the Micro controllers help

[388TH_A]

So im using PonyProg to flash my controllers and i have done it in the past but now for some reason its not working... I get a yellow flashing light on the COM board so i know something is working. Any ideas on what i could be missing? maybe a setting in ponyprog? My setting in Windows is

Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None

In PonyProg i have

Serial
SI Prog API
COM1
nothing checked

Trevor

[sgaert]

What Controller you try to flash?

99% of all flash problems are faults on the PCB´s. Check every conection on the COM-Board and board you try to flash with a Multimeter. Check also your cabel´s.
If you dont find a fault post some pictures with high resolution.

Stefan

[388TH_A]

Im trying to flash the ATTINY 2313 in the DO64. And to warn you the pics are big files so ill post them as links.

COM_1
COM_2
COM_3
COM_4

DO64_1
DO64_2
DO64_3
DO64_4
DO64_5
DO64_6

[388TH_A]

OK WOW for me just to open one pic is really SLOW if you want i can make them smaller so they will open up faster

[sgaert]

Hi the size is ok, a faster server would be better
Bzw. i only need ob Picture from the Top and 1-2 from the backside.

[388TH_A]

Ok so here are the backs. But i think its maybe a setting in Windows or PonyProg my self.

COM
DO64
DO64

[388TH_A]

So again i went slow and double checked my connections on the PCBs and every thing is like it should be. So there for i know its the Computer for sure well at least im 99% sure. Guess i wont really know untill i get this working!

And just double checking i shouldnt have to add 5 Volt power to the DO64 to program it do i?

[iwik]

Trevour,
Have you tried to flash with it connected to another pc.I know in the earlier days flashing problems were encountered and was overcome by using a diff
serial input on another pc.I know u say that it used to work,but some things change unkown to us or work by luck then finally they work no more.
Les

[sgaert]

thanks for the pic´s.
The DOut looks good, the com you have self build that is hard to check.
Do you try the Echotest with the FSBus Software??
With that you can check the serial connection.

Stefan

[388TH_A]

So Echo Test works like a champ and trying it on a 2nd computer still getting that -24 error! So... maybe it is the PCBs but yet i tested all the connections and it works fine so not sure