eyebrow trim

[steveeverson]

Hi everyone,
I wondered if anyone has dimensions or even better a drawing of the 737 eyebrow trim as i am looking to make some
Many thanks
Steve

[No Longer Active]

I didn't think that Boeing use eyebrows in their jets anymore because it removes 20lb of weight and also because there is an HUD system in many of the NG jets, I think that the eyebrows were mainly used for NDB and circling approaches, but because of the commonality of technology such as RNAV and GNSS systems the eyebrows become obsolete.....

Ian sissons could always measure you up a piece, or go to:

http://www.aviationmegastore.com/737...=276&art=92058

They sell them there if you have lots of cash, I wouldnt know how you would make them!

Good luck!

Alex

[No Longer Active]

Also....

There was a thread about this here:

http://www.mycockpit.org/forums/arch...p/t-13311.html

And this was Michael Carters attempt at building them:

http://i63.photobucket.com/albums/h1...g722/EB003.jpg

Maybe this will help?

Alex

[steveeverson]

Cheers Alex- your'e right, the later 737's dont have the actual eyebrow windows but there is still an eyebrow trim in the cockpit with the centre part blanked out. Im hoping to get some made out of fibreglass through someone I know.(i definitely dont have lots of cash!!)
cheers
Steve

[choffmann]

Steve
Be aware, though, that the NG style trims look slightly different from the classic 737 style trims. If you can come up with a good -and payable - solution, I would certianly be interested in them as well. Eyebrow trims are so extremely difficult to create by means of a simple mortal like me
Cheers
Chris

[Westozy]

Hi Steve, I have just bought a pair from Jackpilot but I don't have them yet. It won't be long!

Cheers Gwyn