Results 1 to 5 of 5
Thread: 777 Mip Cad
-
05-31-2008, 05:55 AM #1
777 Mip Cad
All hail the jester of CAD drawings
Anyway...I started playing around in Google Sketchup today as tomorrow I will start designing the 787 MIP from pictures and common features with the 777. Later I will start the pedestal and overhead but I won't until I feel the MIP is close to perfect and is complete down to the last screw.
I spent a bit of time today on the 777 MIP below. Sorry but colours probably make it look horrible but it is impossible to get the colours perfect. Put a bit of detail into the display frames, no dzus, not any detail in buttons, no backlit text but it is 100% to scale...a part from the top part maybe, it looks a bit wrong.
Anyway didn't get this near to perfect because I'm not doing the 777...at the moment
Comments welcome.
Many Thanks,
Lewis Simmons
-
05-31-2008, 09:04 AM #2
Looks Good Lewis..
Trev________________________
Trevor Hale
-
05-31-2008, 06:25 PM #3
Looking very good Lewis
Keep the ball rolling
-
05-31-2008, 06:36 PM #4
- Join Date
- Mar 2007
- Location
- Vancouver
- Posts
- 192
777 dimensions
Hi Lewis,
You're being modest. Most of us never get to visualize using 3D like that. Acknowledging that you're not building a 777, I probably will be. Do you have any measurements that you can upload, especially for instrument panels but also throttle, and fuselage? I found some technical drawings but the way they've written the measurements is like a quiz. All the info is there but you have to add, subtract then add again, then subtract, just to get a simple measurement.
Or are your 3D files portable in any way? I'm not sure I have anything to play them on but if they're in some kind of open source format, I'm sure I'll find something.
Thanks mister
PaulVANCOUVER
Jet fighter / single pilot sim, plus thinking of a 777 as a secondary sim.
-
05-31-2008, 08:05 PM #5
Im using Google Sketchup at the moment which is free but impossible to use for sending off to a company to build.
I'm designing the 787 MIP in a different program later today and I will post some images later.
I can send the file to you. If you PM me with your email, I will email it to you nice and easy and you can download google sketchup for free from google.
I do have a workbook but it is from http://www.project777.com/ in the downloads section so it will be easier to get it directly from there. You do have to do a bit of subtraction etc but not too much.
I guess later once I have done all my 787 stuff or when I have a free moment I will finish the 777 MIP and upload it into the download section for all.Many Thanks,
Lewis Simmons
6yo FACECAST LINK 14year GIRLS FORUM : ( )...
YWM RAR JAILBAIT ZOOM