Opencockpits MCP (USB) SIOC

Hi guys,

As you can see im new here, nice to meet you all :)

I've started getting all the parts bit by bit in order to build my home simulator. Not so long ago I bought OpenCockpits MCP USB version, which should be plug and play etc. I have SIOC ver 3.41. Im looking to use this with Project Magenta's MCP software so I can use it in FSX with the default 737 that comes with FSX.

Im having problems at the moment with the MCP I only took it out of the box yesterday to have a play around with my toy, but I cannot for the love of me get it working. I have followed all the instructions for adding some lines in sioc.ini file also with the script I want sioc to load on runtime which would be the MCP_737.txt im sure.

When I load up SIOC and also load up FSX with FSUIPC and the PM MCP software the lights come one for about 5 seconds and then turns off again. I cant use my MCP with anything.

I've also noticed that the support on the OC site is next to none, or it's in Spanish in which i am not fluent in. I can see MyCockpits has added in a OC section for people with their hardware.

So do any of you OC guys knows what is going on or can lead my in the right way.

SIOC 3.41

FSX SP2

Projectmagenta Latest updates

FSUIPC: latest Version registered.

Thanks for the help.

POst up the SIOC.ini file and a screen shot of your SIOC running.

Thanks for you quick reply. Il post them now :)

Quote:

---

[ fichero de configuracion para el SIOC ver. 3.41 ]
[ Configuration file for SIOC ]


[************** SIOC ***************]

[ Puerto del servidor IOCP ]
[ IOCP port ]
IOCP_port=8092

[ Tiempo de respuesta máximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=4000

[ Arranque minimizado en la barra ]
[ Start minimized in tray ]
Minimized=No

[ Retraso necesario para las variables toggles (Project Magenta)]
[ Deley needed for var. toggles (Project Magenta) ]
toggle_delay=20

[ Fichero de configuracion ]
[ Configuration File ]
CONFIG_FILE=.\MCP_737.txt


[************** IOCARDS MODULE ***************]

[ Desactivar el módulo de las IOCards ]
[ Disable IOCards module ]
IOCard_disable=No

[------------- CARDS CONFIG -------------]

[ IOCard Master ]
[...............]

[ Spanish : ]

[ MASTER=(Indice device),(Tipo),(Número de tarjetas),(Número device) ]

[ Indice Device: Índice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]

[ tipo = 0 : Emulador de Master Card ]
[ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente ]
[ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad ]
[ tipo = 3 : Placa de expansión por puerto paralelo ]
[ tipo = 4 : Tarjeta USBExpansion usada ]
[ tipo = 5 : Modulo MCP de Opencockpits ]

[ Número de tarjetas = Número de placas Master usadas, 1 a 4 para uso de placas de expansión, 1 para conexión de placa Master directa o del Emulador ]

[ Número de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Dirección del puerto paralelo (por ejemplo $0378), o número de dispositivo USB ]

[ Por ejemplo para una Master conectada al puerto paralelo : ]
[ MASTER=0,1,1,$0378 ]

[ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]

[ Un ejemplo de conexión a simulador ]
[ MASTER=0,0,1,0 ]


[ English : ]

[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]

[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]

[ type = 0 : Master Card Emulator ]
[ type = 1 : Master Card connected directly to parallel port ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port ]
[ type = 3 : Expansion Card connected throught parallel port ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]

[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]

[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]

[ For example, a Master Card connected directly to parallel port : ]
[ MASTER=0,1,1,$0378 ]

[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]

[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]

[ Use the first USBExpansion card connected with only one Master Card attached ]
[ Esta definición es para usar la primera tarjeta USBExpansion que se encuentre instalada que además llevará conectada una placa Master ]
MASTER=0,5,1,0


[ Others Cards / Otras tarjetas ]
[...............................]

[ Spanish : ]

[ Nombre_de_tarjeta=(Indice device),(Número device) ]

[ Indice Device: Índice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]

[ Número de device = 0 para usar primera tarjeta USB de este tipo detectada ó número de dispositivo USB ]


[ English : ]

[ Name_of_card=(Device index),(Device number) ]

[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]

[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]

[ Ejemplo de dos USBServos en indices 0 y 1, y números de devices 17 y 23 ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]

[ USBServos=0,17 ]
[ USBServos=1,23 ]


USBStepper=0,0
USBKeys=0,0
USBServos=0,0
USBRelays=0,0
USBDCmotor=0,0

[ Para los ejes analógicos se usan los números de devices de las tarjetas donde están alojados ]
[ For analogic axles, you use the device number of cards what allow the axles ]

USBAnalogic=0,0


[************** FSUIPC MODULE ***************]

[ Desabilitar lectura de las FSUIPC ]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No

[ Refresco recepción FSUIPC ]
[ FSUIPC refresh ]
FSUipcRefresh=50


[************** IOCP CLIENTS MODULES ***************]

[ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=3000

[************** IOCP CLIENT MODULE #0 ***************]

[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient0_disable=Yes

[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient0_host=localhost

[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient0_port=8090


[************** IOCP CLIENT MODULE #1 ***************]

[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes

[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient1_host=localhost

[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient1_port=8099


[************** SOUND MODULE ***************]

[ Ficheros de sonido ]
[ Sound Files ]

[ Desactivar el módulo de sonido ]
[ Disable Sound module ]
Sound_disable=yes

[ Volumen general de los sonidos 0-100 ]
[ Master Volume 0-100 ]
Volume=100


[ put '*' first filename for loop Sound ]
[ anteponer '*' en el fichero para bucle continuo de sonido]

[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]

[ Sound=Fichero_wav,frecuencia,volumen,balance ]
[ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
[ volumen=0 hasta 100 -1=Volumen por defecto ]
[ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]

[ #1 ]
Sound=APDis.wav,-1,-1,-1

[ #2 ]
Sound=*outermk.wav,-1,-1,-1

[ #3 ]
Sound=*hello.wav

[************** KEYBOARD EMULATOR MODULE ***************]

[ Nombre exacto de la ventana donde se enviarán las teclas ]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]

window =a.txt - Bloc de notas


[ Asignación de teclas ]
[ assign youe keys ]

#1=\B\A
#2=/
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=
#45=
#46=
#47=
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=<a
#200=<b

[ End of File ]

---

http://img169.imageshack.us/img169/7866/siocet5.jpg

If you need more information just ask and I'l do my best. I'm totally new to OC hardware and software. Im only familiar with Goflight products so far.

OK, in your MCP_737.ssi , what device number are you using in all your assignments?

Im going to sound newbish here, I haven't got a clue about this device number thing. Care to explain a little as I don't know what you mean?

Quote:

---

// *****************************************************************************
// * Config_SIOC ver 1.97 - By Manolo Vélez - www.opencockpits.com
// *****************************************************************************
// * FileName : MCP_737.txt
// * Date : 3/4/2005
// * Ver : 1.0
// * MCP de Project Magenta de 737, usando 00 fijos para ALT y VSpeed, y - del VS mediante salida


//********************************
// INICIALIZACION
//********************************



Var 2000, Value 0
{
V2501 = 2 // COURSE
V2503 = 1 // HDG
V2504 = 10 // ALT
V2567 = 1 // 00 DEL ALT (el 00 es fijo)
V2250 = SETBIT 23 // Pone MODO IAS
V2257 = V2104 // IAS leidas en IAS temporal
V2258 = V2105 // MATH leidas en MATH temporal
V2502 = V2104 // Pone por IAS en display
}


//********************************
// ENTRADAS DESDE FSUIPC
//********************************


Var 2101, Link FSUIPC_IN, Offset $04E6, Length 2 // VS de entrada
{
L0 = V2101 // En L0 el valor leido
C0 = TESTBIT V2101 ,15 // Comprueba si es Negativo
IF C0
{
V2800 = L0 - 65536 // Si es negativo binario pasa a negativo d
}
ELSE
{
V2800 = L0 // No es negativo, deja igual dejando siemp
}
CALL V2900 // Pone valor en el display
}

Var 2102, Link FSUIPC_IN, Offset $051C, Length 2 // Indicadores MCP
{
C0 = TESTBIT V2102 ,0 // Está apagado el Display del VS ?
IF C0 // SI, entonces
{
V2554 = 0 // Quita el 00 final del display
V2500 = -999999 // Apaga resto de digitos
V2553 = 0 // Me aseguro de apagar el signo -
}
ELSE // NO, entonces
{
V2554 = 1 // Enciende los 00 del display
CALL V2900 // Pone el V/S en el display
}
}

Var 2103, Link FSUIPC_IN, Offset $04F0, Length 2 // LUCES del MCP
{
V2552 = TESTBIT V2103 ,2 // V/S
V2551 = TESTBIT V2103 ,12 // F/D
V2550 = TESTBIT V2103 ,11 // A/T
V2555 = TESTBIT V2103 ,9 // SPEED
V2556 = TESTBIT V2103 ,10 // N1
V2557 = TESTBIT V2103 ,3 // ALT HOLD
V2558 = TESTBIT V2103 ,4 // APP
V2559 = TESTBIT V2103 ,5 // VORLOC
V2560 = TESTBIT V2103 ,6 // LNAV
V2561 = TESTBIT V2103 ,7 // HDG
V2562 = TESTBIT V2103 ,8 // LVL CHG
V2563 = TESTBIT V2103 ,14 // VNAV
V2564 = TESTBIT V2103 ,0 // AP1
V2565 = TESTBIT V2103 ,1 // AP2
C0 = TESTBIT V2103 ,15 // Modo MATH o IAS ?
IF C0 // MATH MODE
{
V2258 = V2105 // Cargo valor en temporal
V2566 = 1 // Enciendo el punto decimal
CALL V2901 // Display del valor
}
ELSE // IAS MODE
{
V2257 = V2104 // Cargo valor en temporal
V2566 = 0 // Apago el punto decimal
CALL V2901 // Display del valor
}
}

Var 2104, Link FSUIPC_IN, Offset $04E0, Length 2 // IAS
{
CALL V2901 // Display del valor
}

Var 2105, Link FSUIPC_IN, Offset $04E8, Length 2 // MATH
{
CALL V2901 // Display del valor
}


//********************************
// SALIDAS A FSUIPC
//********************************


Var 2250, Link FSUIPC_OUT, Offset $5410, Length 4 // Pulsadores-I PM

Var 2251, Link FSUIPC_OUT, Offset $5414, Length 4 // Pulsadores-II PM

Var 2252, Link FSUIPC_OUT, Offset $540C, Length 2 // V/S de salida

Var 2253, Link FSUIPC_OUT, Offset $5414, Length 4 // Botones MCP

Var 2254, Link FSUIPC_OUT, Offset $0C4E, Length 2 // COURSE

Var 2255, Link FSUIPC_OUT, Offset $5408, Length 2 // HDG

Var 2256, Link FSUIPC_OUT, Offset $540A, Length 2 // ALT

Var 2257, Link FSUIPC_OUT, Offset $5406, Length 2 // IAS

Var 2258, Link FSUIPC_OUT, Offset $540E, Length 2 // MATH


//********************************
// INTERRUPTORES Y PULSADORES
//********************************


Var 2300, Link IOCARD_SW, Input 38 // Interruptor A/T
{
IF V2300 = 1 // Si está encendido
{
V2250 = TOGGLE 19 // Hago toggle del bit 19
}
ELSE
{
V2250 = TOGGLE 20 // Si apagado, toggle del bit 20
}
}

Var 2301, Link IOCARD_SW, Input 27 // Interruptor F/D
{
IF V2301 = 1
{
V2251 = TOGGLE 5
}
ELSE
{
V2251 = TOGGLE 6
}
}

Var 2302, Link IOCARD_SW, Input 52, Type P // Boton V/S
{
V2253 = CHANGEBIT 11 ,V2302 // Si pulsador encendido, bit 11 a 1, si ap
}

Var 2303, Link IOCARD_SW, Input 35, Type P // Boton SPEED
{
V2250 = CHANGEBIT 22 ,V2303
}

Var 2304, Link IOCARD_SW, Input 34, Type P // Boton N1
{
V2250 = CHANGEBIT 21 ,V2304
}

Var 2305, Link IOCARD_SW, Input 36, Type P // Boton LVL CHG
{
V2250 = CHANGEBIT 24 ,V2305
}

Var 2306, Link IOCARD_SW, Input 39, Type P // Boton HDG
{
V2250 = CHANGEBIT 25 ,V2306
}

Var 2307, Link IOCARD_SW, Input 44, Type P // Boton ALT HOLD
{
V2250 = CHANGEBIT 30 ,V2307
}

Var 2308, Link IOCARD_SW, Input 37, Type P // Boton APP
{
V2250 = CHANGEBIT 29 ,V2308
}

Var 2309, Link IOCARD_SW, Input 53, Type P // Boton VORLOC
{
V2250 = CHANGEBIT 28 ,V2309
}

Var 2310, Link IOCARD_SW, Input 45, Type P // Boton LNAV
{
V2250 = CHANGEBIT 27 ,V2310
}

Var 2311, Link IOCARD_SW, Input 49, Type P // Boton VNAV
{
V2250 = CHANGEBIT 26 ,V2311
}

Var 2312, Link IOCARD_SW, Input 50, Type P // Boton DISENGAGE
{
IF V2312 = 0
{
V2253 = TOGGLE 8 // Si apago pongo el bit a 0
}
ELSE
{
V2253 = TOGGLE 9 // Si está encendido, pongo el BIT a 1
}
}

Var 2313, Link IOCARD_SW, Input 62, Type P // Boton AP1
{
V2253 = CHANGEBIT 0 ,V2313
}

Var 2314, Link IOCARD_SW, Input 58, Type P // Boton AP2
{
V2253 = CHANGEBIT 1 ,V2314
}

Var 2315, Link IOCARD_SW, Input 40, Type P // Boton MATH
{
V2250 = CHANGEBIT 23 ,V2315
}


//********************************
// ROTARY-ENCODERS
//********************************


Var 2400, Link IOCARD_ENCODER, Input 55, Aceleration 6 // Encoder VS
{
L0 = V2400 * 100 // Incrementa de 100 en 100
V2800 = ROTATE -9000 ,9000 ,L0 // Suma o resta del valor temporal de V/S
IF V2800 < 0 // Si temporal V/S es negativo
{
V2252 = V2800 + 65536 // pasa a binario negativo.
}
ELSE
{
V2252 = V2800 // Si no, deja igual pasando el valor al PM
}
}

Var 2401, Link IOCARD_ENCODER, Input 31, Aceleration 6 // Encoder COURSE
{
V2501 = ROTATE 0 ,359 ,V2401 // Roto el valor del COURSE
}

Var 2402, Link IOCARD_ENCODER, Input 28, Aceleration 6 // Encoder IAS Y MATH
{
C0 = TESTBIT V2103 ,15 // Indicador MATH o IAS ?
IF C0 // MATH MODE
{
V2258 = LIMIT 25 ,95 ,V2402 // Inc o decremento el valor del MATH
}
ELSE
{
V2257 = LIMIT 0 ,340 ,V2402 // Inc o decremento el valor del IAS
}
}

Var 2403, Link IOCARD_ENCODER, Input 41, Aceleration 6 // Encoder HDG
{
V2503 = ROTATE 0 ,359 ,V2403
}

Var 2404, Link IOCARD_ENCODER, Input 46, Aceleration 6 // Encoder ALT
{
V2504 = LIMIT 0 ,500 ,V2404
}


//********************************
// DISPLAYS 7 SEGMENTOS
//********************************



Var 2500, Link IOCARD_DISPLAY, Digit 12, Numbers 2 // VS

Var 2501, Link IOCARD_DISPLAY, Digit 0, Numbers 3 // COURSE
{
V2254 = V2501 // Pasa el valor al PM
}

Var 2502, Link IOCARD_DISPLAY, Digit 3, Numbers 3 // IAS Y MATH

Var 2503, Link IOCARD_DISPLAY, Digit 6, Numbers 3 // HEADING
{
V2255 = V2503 // Pasa el valor al PM
}

Var 2504, Link IOCARD_DISPLAY, Digit 9, Numbers 3 // ALT
{
V2256 = V2504 // Pasa el valor al PM
}


//*************************************
// SALIDAS DE LA MASTER (LEDS Y FIJOS)
//*************************************


Var 2550, Link IOCARD_OUT, Output 29 // Led A/T

Var 2551, Link IOCARD_OUT, Output 19 // Led F/D

Var 2552, Link IOCARD_OUT, Output 38 // Led del boton V/S

Var 2553, Link IOCARD_OUT, Output 36 // Signo - del display V/S

Var 2554, Link IOCARD_OUT, Output 35 // 00 del VS

Var 2555, Link IOCARD_OUT, Output 17 // Led SPEED

Var 2556, Link IOCARD_OUT, Output 18 // Led N1

Var 2557, Link IOCARD_OUT, Output 26 // Led ALT HOLD

Var 2558, Link IOCARD_OUT, Output 25 // Led APP

Var 2559, Link IOCARD_OUT, Output 23 // Led VORLOC

Var 2560, Link IOCARD_OUT, Output 24 // Led LNAV

Var 2561, Link IOCARD_OUT, Output 22 // Led HDG

Var 2562, Link IOCARD_OUT, Output 21 // Led LVL CHG

Var 2563, Link IOCARD_OUT, Output 20 // Led VNAV

Var 2564, Link IOCARD_OUT, Output 34 // Led AP1

Var 2565, Link IOCARD_OUT, Output 30 // Led AP2

Var 2566, Link IOCARD_OUT, Output 28 // Led . DECIMAL

Var 2567, Link IOCARD_OUT, Output 27 // 00 del ALT


//********************************
// VARIABLES IOCP INTERNAS
//********************************


Var 2800 // Valor temporal del V/S



//********************************
// RUTINAS INTERNAS
//********************************


Var 2900, Link SUBRUTINE // Pinta V/S
{
C0 = TESTBIT V2102 ,0 // Comprueba si deben de estar apagados
C0 = NOT C0
IF C0 // Sólo en el caso de estar encendidos
{
IF V2800 < 0 // Si V/S es negativo, pasa a positivo
{
L0 = ABS V2800
V2553 = 1 // Enciendo el signo -
}
ELSE
{
V2553 = 0 // Apago el signo -
L0 = V2800
}
V2500 = L0 / 100 // Manda el valor ajustado de V/S a display
}
}

Var 2901, Link SUBRUTINE // Pinta IAS / MATH
{
C0 = TESTBIT V2103 ,15 // Modo MATH o IAS ?
IF C0 // MATH MODE
{
V2502 = V2105 // Pone valor MATH en el display
}
ELSE
{
V2502 = V2104 // Pone valor IAS en el display
}
}

---

I you notice on your SIOC display, it shows IDX=0 0 is the device number

Uograde to SIOC 3.5, also download the SIOC INI set-up program. Run the INI set-up program then run SIOC 3.5. Click on the config tab, in the config program, double chack ALL inputs have the device number correctly shown/assigned.

Ok, I will do this now. Thanks ever so much in helping me out :)

Can I ask, but which part of these lines of code in the config shows the Device number because I cant see it anywhere, or its probably right in front of my eyes I just can see it.

When you open the Config_SIOC, you double click on any of the "INPUTS", that opens the parameter window. On that window you will see a box labeled 'Dispositivo" put the device number in that box. Save your file and reload SIOC

Thanks for your help on this MCP, I have done everything you stated.

That config ini program is quite neat, theres a selection under master for my MCP which is what I selected. I then gave it an IDX number of 3. saved and reloaded, Now i can see my my device in there. I then followed into the config part and in putted the IDX number into every command that it showed under Dispositivo, Saved, reloaded and the displays and lights flashed and then back to nothing.

I wonder am I missing something. I cant contact OC about this because their support isn't any good for English spoken people.

http://img520.imageshack.us/img520/3665/sioc2jv2.jpg

OK, use the controlador program and verify the inputs and outputs match your assignments. Verify that it can 'see' the switches working. If it doesn't, you have other issues. Report back and let me know.

Hi, Just to let you know that I have only this version of the MCP I bought about 3 weeks or more ago.

This is it. It is not supposed to need any IO cards etc.

http://www.opencockpits.com/catalog/...roducts_id=111

This module is completely plug&play (no need of USB driver). Only needs SIOC with your favourite configuration file that will link with the simulator via FSUIPC or IOCP.

Notice it says, needs SIOC with 'YOUR' configuration. I would still verify you see the inputs working, IOCP console will allow this as well. In the mean time, i will download and read the manual.

Quote:

---

Originally Posted by 737NUT

This module is completely plug&play (no need of USB driver). Only needs SIOC with your favourite configuration file that will link with the simulator via FSUIPC or IOCP.

Notice it says, needs SIOC with 'YOUR' configuration. I would still verify you see the inputs working, IOCP console will allow this as well. In the mean time, i will download and read the manual.

---

Hi 737NUT, The manual is 4 small pages long, with no great data, I will still follow your steps and post a screenshot for you. Thanks once again for having the most patience with me.

Right, I have checked it with IOCPconsole and opened the config file of MCP_737.ssi to add the commands inside. I have project magenta loaded along with FSX etc, I try use the hardware and notthing comes up. But If I use the mouse on the PM MCP I can see SIOC logging the commands, so this leads me to believe that FSUIPC is working and doing its job along with SIOC listening for commands from FSUIPC, but the hardware it self does notthing even tho the hardware is showing up in the main SIOC window with IDX=3 - IOcard MCP Device = 75

So I think I got a defect product. I thought these guys would at least test them before sending it out to me. Or I could be totally mistaken and its my dumbness that's making it not work.

Either way I know have to wait and sufice to broken english support in which takes days :(

This hasn't been a good experience for me at all with opencockpits.

[ MASTER=3,5,1,75] You should have that entry in your new sioc.ini file. Please verify and if you don't, add it and delete the entry that is in there.

Here's my ini file, as you can see its in there now and still not working. Im going to install FS2004 and see if that works with this MCP with the standard test. It will be interesting to see if it does or not. Il get back to you with further details. Thanks for the help the so far buddy !! :)

Quote:

---

[Fichero de configuracion para el SIOC]
[ Configuration file for SIOC ]
Version=3.5
generated_by=Config_SiocIni

[SIOC]
IOCP_port=8090
IOCP_timeout=4000
Minimized=No
toggle_delay=20
CONFIG_FILE=.\MCP_737.txt

[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=Yes

[MASTER]
MASTER=3,5,1,75

[USBSTEPPER]
USBStepper=0,0

[USBKEYS]
USBKeys=0,0

[USBSERVOS]
USBServos=0,0

[USBRELAYS]
USBRelays=0,0

[USBMOTOR]
USBDCmotor=0,0

[USBANALOGIC]
USBAnalogic=0,0

[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=50

[IOCP CLIENTS MODULES]
IOCPini_delay= 3000
IOCPclient0_disable=Yes
IOCPclient0_host=localhost
IOCPclient0_port=8090
IOCPclient1_disable=Yes
IOCPclient1_host=localhost
IOCPclient1_port=8099

[SOUND MODULE]
Sound_disable=Yes
Volume=100

[ #1 ]
Sound=APDis.wav,-1,-1,-1

[ #2 ]
Sound=*outermk.wav,-1,-1,-1

[ #3 ]
Sound=*hello.wav

[KEYBOARD EMULATOR MODULE]
window=a.txt - Bloc de notas
#1=\B\A
#2=B
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=/0
#45=/1
#46=/A
#47=
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=<a
#200=<b

[ End of File ]

---

Ok, I've found out the problem, Its the USB Hub I was using that I got from Goflight, for some reason it doesn't like the MCP. Once I connected it into the main usb port on the PC and used MCPtest.exe all the lights and displays turned on and stayed on.

I can use it with FSX with PM, but the script functions are totally incorrect for the PM MCP interface.

Thanks 737Nut for helping me with this MCP, I really appreciate all your help you have given me while you also thought me a thing or two regarding the hole SIOC thing.

Hi

My script works just fine for the MCP von Opencockpits with PM MCP. Just need your E-mail address than I can send you my SIOC file.

Guess there are a few more here who want to have a look at it. Just ask and than I can send it out.

Cheers Norbert

Hi nricky,

Thanks for popping by and offering your script, I have sent you a PM with my email address if you want to pass it over. Im currently 20% programmed of this MCP. Having a full script would save me mega amount of time !

Hi guys,

Just for information. I have made a SIOC script that will let the Opencockpits MCP work flawlessly as a Level-D 767 MCP. It is available via Opencockpits

http://www.opencockpits.com/modules....ownload&cid=33

or via my website www.nicokaan.nl page downloads file name MCP737NG.txt.

You will also need my free Lekseecon program that connects SIOC digitally to the Level-D SDK via the IOCP protocol,

Note that the MCP module is hardware wise plug and play, but you still need to put some software/configuration parameters right (as well in SIOC.INI as in Lekseecon.ini). How to do that is indicated in my SIOC script, but some notion of programming (scripting) is recommended/needed. Do not expect it will work out of the box. Read that information and my Lekseecon manual carefully (3 times ;-) ) before starting to ask questions.

Note also that a lot of information about SIOC and SIOC scripts is available in the forums of Opencockpits. Most of it is in the English language.

regards,
Nico Kaan

Your welcome for the help, thats what this site is all about! :)

Glad you are making progress as well!! SIOC is fun once you start playing with it. Just back-up what works then make changes and additions and you will see how powerful it can be!