The installer should copy it automatically to your Prepar3D folder. Otherwise move it to the SIMOBJECTS folder.Quote:
Originally Posted by Space
Printable View
The installer should copy it automatically to your Prepar3D folder. Otherwise move it to the SIMOBJECTS folder.Quote:
Originally Posted by Space
Seems i got it.
But have massive Problems with FSUIPC, couldn`t install it into P3D V2.5. Installer doesnt start downloaded the newest file.
Any ideas?
Hi JL - flybywire seems to have gone crazy with the latest release. I am not sure if there is something wrong on my end. The aircraft is unable to follow the FD with AP1 or AP2 engaged, it pitches violently up and down and my V/S goes out of normal range, and so does my speed limits.
I have tried both ASN and OPUS weather with the same results.
I am open to any other suggestions -- right now can't fly the bird. Thank you.
Attachment 10083
Hey guys
I have exactly the same Problem in the new Version as he said. Tried selected or managed speed on takeoff but no solution. Also thought it was on my side initially.
Greetings Daniel
Quote:
Originally Posted by OmniAtlas
Are you guys using 38.5 or is there already a newer version out?
I've installed 38.5 and don't experience such a behaviour like you describe. Have flown lots of approaches and all have been stable so far. But as I said, only 38.5.
Regards, Bon
Hi Bon, I have noticed this behavior with 38.6.Quote:
Originally Posted by anzabon
Hey Bon
I'm using 38.6 or newer.
Greetings Daniel
Quote:
Originally Posted by anzabon
Same behaviour to me too...Quote:
Originally Posted by OmniAtlas
Hi Guys,
also some trouble here: the flaps extend very slow, and I got disconnects of my PFD and ND diplays, which I never had before!
I have now returned to 38.5 and all seems working well.
Regards,
Stephan
Hi ALL!Quote:
Originally Posted by anzabon
The same here. Some problems with the Speed and V/S in Managed Mode. See here in a short Video.
King regards
Florian
For those havign issues with latest version:
What are your FPS ? try limiting to 30fps (using only the default FSX/P3D limiter, bot a third party tool).
JL
Quote:
Originally Posted by OmniAtlas
I have this problem too.
I installed 38.6 plus autoupdate.
I was not able to fly :(
Fps limited to 30 in p3d... LOWW by FlyTampa or Venice X Aes, without JH loaded i have 30 fps , with JH loaded i have 50% of this fps (13-14-15) !!!Quote:
Originally Posted by jeehell
thank you for putting this up. It is the same behavior I noticed. I haven tried reinstalling FSUIPC with no resolution. At least we know it is not an isolated issue! Perhaps something wring with the aircraft.cfg file?Quote:
Originally Posted by tcane
FPS is locked at 30 FPS within P3DQuote:
Originally Posted by jeehell
I have fps set unlimited. At kmco 60fps plus without asn. With asn 48-73 max. The issue that i noticed with the update to 38.6 is on approach the tcas throws a traffic warning with no traffic in sight. I had the same issue with the bird climbing and desending at crazy vs but i hit the ap to and fly manually a few thousand feet and she flys ok after that. I did a short test flight a few minutes ago from kmco to ktpa at FL090 and had no issues. The a/c did an ILS landing on runway 19 right but i got the tcas warning again with no aircraft in sight.
Hey JL
My FPS are locked to 30.
It is a departure route i've used many times before without any problems.
We have an Airbus that thinks it can climb like an F/A18 . :D
Greetings Daniel
Quote:
Originally Posted by jeehell
Quote:
Originally Posted by OmniAtlas
I have a doubt : do you have a single pc installation like me?Quote:
Originally Posted by caddyboy
Yes, running on one computer.Quote:
Originally Posted by asessa
I think the problem about low fps is related to this aspect... but the pitch problem i don't know ,do it may occours when there are too low fps ?Quote:
Originally Posted by OmniAtlas
Quote:
Originally Posted by asessa
My server is setup with a core i7 4790k, 8gb of ram, gtx 780. Client pc is a core i5 4670k, 8gb of ram, gtx 660. The third pc is a normal laptop, nothing spectacular used for asn weather, va acars and and moving map.
Have 3 monitors connected to the gtx 780 (planning on getting the gtx 980 or titan). 3 monitors connected to the gtx 660 plus cdu 2 from vri. i only run only p3d on the server with fmgs server and vrisim. Client runs all gauges for captain side plus standby gauges and mcdu.
Thanks
So you confirm me the low fps issue occours on single server installationQuote:
Originally Posted by caddyboy
Yeah, you can't run the sim and gauges on 1 pc. It takes a perofmace hit. I just would just like to know what cause the pitch up and tcas warning on approach.Quote:
Originally Posted by asessa
I am glad i am not experiencing any fps issue at this time.
Can some me tell what i have to do with the created bin Files on the severs navdate Folder? Do i have to copy them to the ND Clients? If so, in what folder exactly?
And:
after turning on the option "EXT PWR" in P3D the korry EXT PWR on OVHD (Harware) does not coming up.
Thanks in advance for Infos.
Andy
I pasted the bin files in the nav folder on the client pc. For the external power make sure it is activated in the sim menu before turning it on. Once activated the korry will turn green and say "avail", push it and it will provide power for you to start batteries and apu. It is in the users guide under jeehells quic flight walk thru. You can also turn the batteries on and start the apu. It takes about 90-120 secs doing it this way.Quote:
Originally Posted by Space
What hardware do you have?
For fsx low fps see nicks fsx tweak guide.
http://www.simforums.com/forums/the-...opic46211.html
My installation of p3d is already tweaked as well. Without JH i have 30fps (limited to 30 in p3d) .Quote:
Originally Posted by caddyboy
How many gauges are you using? Dors fps improve whem changing to unlimited? When i flew aerosoft airbus at fps locked at 30 my fps was low, went to unlimited at went to 40-50. Sometomes limiting fps is not so good, but jeehell said to do to see what happens.
My configuration is single seat, so I have everything except FO PFD / ND / MCDU.Quote:
Originally Posted by caddyboy
My pc is a i7-960 , 12Gb 1600 DDR3 , GTX660 OC + GTX460OC, 2SSD (1 for SO and 1 for P3D). Win 7 64 bit
In any case, i already planned to implement a second pc, next month i think ;)
I tried that same config and had low fps with 6 monitors on 1 pc. Once a 2nd pc is used your fps will be alot higher. For now you can try to use pfd,nd, sd,ecam, mcdu and over head. See if that works. Should be do able until new pc comes.. maybe improve fps too.Quote:
Originally Posted by asessa
I already use those plus Stbys (Altimenter, Speed, Clock, Nav) :)Quote:
Originally Posted by caddyboy
ps.
Did fcu software needed or not ?
I use it. For me it is eye candy. I really dont need it sonce i use fcu from vri. Im am thinking if you do not use the standby instrumemts for now maybe you can improve fps and enjoy this beautiful software jl has provided. Then use them when you get your new pc. Just a suggestion:)Quote:
Originally Posted by asessa
i limited to 30 mi will test again tonight with no limitation and see if I get the same behavior.Quote:
Originally Posted by caddyboy
Hi,
1.) both NDs show a white screen...
cannot get it working.
2.) startup of FMGS starter warns me, to run unter admin privileges and does not fully startup all modules. As admin, it does...
adding this: I updated to B38.6 and now displays are more grey, seem to be dimmed. And the white screen is grey... strange. Wher in the manual can I find the solution?
Whats this?
thx.
Hallo All,
I am process of building up a hardware (Skalarki) sim and tried to make a first flight last night. I have a 3 PC setup. PC1: (i7) P3D + FMGS server, PC2: (i3) Captain ND, PFD, MCDU, ECAMs + Profiler, PC3: (i3) FO ND, PFD and MCDU. P3D limited to 30 fps. In flight violent behavior, steep climbs and decends, ovespeed. Not really flyable. It seems that the FBW is broken.
Best regards,
--pim
I can try ;)Quote:
Originally Posted by caddyboy
I have tried a flight with FPS set to unlimited, unfortunately the same behavior is still there.
I am sure the FBW is being worked on by JL, lets be patient :) In the mean time, we can always go back to 38.5.
In other news Flight Simulator Manager is now free http://secure.simmarket.com/fsps-fli...en_4845).phtml
I can't seem to unlock it --- seems all licenses are used up? It could be a good instructor station for JL...
Hey OmniQuote:
Originally Posted by OmniAtlas
I have the Instructor Station by Luis Gordo. Works really well.
http://secure.simmarket.com/advanced...rds=luis+gordo
In combination to that i have TOPCAT for fuel and Avilasoft EFB for flight planing.
Greeting Daniel
Dear JL
With the newest version installed, my flaps and slats are moving very very slowly.
Happy easter
Manuel
@Daniel:
What I found out about Instructor Station:
you get the serial number in the delivery mail,
BUT: if you once entered a wrong number and try to activate, then you cannot enter another serial untill you restart the program again.
And also I must say, I would not pay for this thing. Its something experimental, a students exercise or so, that does not even work with FSX in a network...
Hey NetservQuote:
Originally Posted by netserv
For me it works perfectly together with widefs.
You can easily ask for a new key if you need one.
I agree with you though that there would be better ways to program software like this.
Greetings Daniel