Yes i have the latest nvidia drivers, i made a full windows 10 update and now it works !! hahaha thanks for your help Iappreciate that!! thanks JL!!Quote:
Originally Posted by jeehell
Printable View
Yes i have the latest nvidia drivers, i made a full windows 10 update and now it works !! hahaha thanks for your help Iappreciate that!! thanks JL!!Quote:
Originally Posted by jeehell
An additional information:Quote:
Originally Posted by buentead
If I switch BAT1 and BAT2 on, switch AP MASTER ON and start the APU (all LED's remain off) and waiting for the APU to start, then the LED's will be on as soon as the APU provides power. This is in accordance to the EXT PWR behavior.
I hope this additional information helps.
Adrian
Many Thanks JL - new Eis.exe works fineNG
Hello everybody;Hope you are safe. I have a problem with weather Radar , no files are being written to wxr folder. No issues from FSUIPC.ini .Can any one help in this regards.Thank youMike
Yes, confirm that. The strange graphics of the PFD and STBY are gone JL. Many many thanks for the update.But by the way, since the last 2 or 3 versions, the TOD calculation by MCDU seems wrong. The TOD is shown in the FPLN and on the ND way to far before itīs really nessecary to descent. i also notice that the time calculation is something weird. If you still on Ground the MCDU Shows the Right Duration of the flight at the Destination line, but once in the air when it switch to ETA UTC it Shows a wrong figure at the beginning which will then calculates down to the Right one step by step while flying. I. e. when i start at EDDH to EDDF the MCDU Shows a flightduration of About 50 min to EDDF which is correct. When i take off at lets say 1400 UTC the ETA Shows something like 1630UTC once airborne and calculates down step by step to the matching ETA as the flight proceeds.Quote:
Originally Posted by Jokast
Hi MikeQuote:
Originally Posted by startrail
Today, I tested the weather radar with the latest updated version. All works fine in my configuration. Have you checked the "WX Radar path" in the configuration? Did you look at the directory on the FMGS server or on a remote PC?
cu, Adrian
Thank you for replying Adrian . The path is correct, over and above I usually check the content of WXR file but nothing is being written. File totally empty. Files are shared as needed. Rgds MikeQuote:
Originally Posted by buentead
Hello friends, it is not possible to download, link is broken, some other link to download.
Hi Adrian;Solved. Did a clean install on the VG computer and it worked. Stay safeMikeQuote:
Originally Posted by buentead
Thank you, Mike, for the feedback.Quote:
Originally Posted by startrail
Happy flying
Adrian
The URL is missing the spacer at the end. Issue of the forum. Copy and paste manually.MichaelQuote:
Originally Posted by britto
I am experiencing similar problems with my overhead from Skalarki. In my case, the status of the overhead buttons and some LED are showing weird status. But when I tried to start up only via Jeehell software overhead, everything is working. So I guess, it is the new Skalarki IO Profiler version 5.1, that is causing this. Have you tried, what happens, if you use the Jeehell soft only? MichaelQuote:
Originally Posted by buentead
Thank you Michael. Yes, I tried with the Jeehell software overhead (more details can be found in my post #5). Everything looks good in the SW OVHD. Just the LED's driven by the Jeehell's FDS interface do not work unless the BUS TIE (through EXT PWR or APU) or the AC BUS (through IDG's) are powered. The switches work correct always.Quote:
Originally Posted by michael1508
In my particular issue, Skalarki Profiler is not involved.
Regards, Adrian
Hi all!This all happened when I upgraded my system to P3D v.5 (and also with the hotfix), Jeehell software to the newest one and also I upgraded FSUIPC.Everything seems to work, but the hydraulics doesn't come alive when I start the engines. Also if I try the electric pump, it doesn't feed the hydraulic system. I don't have a clue what is causing this... When I start engines the hydraulics are down and the buttons shows fault at the OVHD. I have tried also software OVHD, but it works as my Skalarki panel. Anyone, any ideas?BrTuomas
Hi EveryoneI have just installed the Active Sky Beta into P3Dv5. Am i correct, that there is something different with the weather radar files and they are not being written into the WXR directory?Best regards, Daniel
Yes, same here. No Clouds in the ND. And no voice device for ATIS in Active Sky. But it's a Beta, so they Need time......Quote:
Originally Posted by Dan320
In the simpatcher.log there are this information "as_connect_64.dll not found" (using asp3d) , i think because now asp3d have it's connector in addon and changed the name : C:\Users\user\Documents\Prepar3D v5 Add-ons\ActiveSkyP5\as_connect_v5.dll
I just perform update and it downloaded some file in PERF->PA320 folder... is it right?
surprising last small updates were for EIS and navdata...Quote:
Originally Posted by asessa
I haven't worked on that yet. It is very probably they changed many things, including WXR API (which AFAIK will not work with enhanced atmosphere)Quote:
Originally Posted by asessa
https://forums.hifisimtech.com/threa...72/#post-53722Quote:
Originally Posted by jeehell
Thank you JL for the latest updates which I just installed in the Sim.I have not changed P3D to v. 5 at this stage, as I will probably wait until later in the year. I also have no FDS Overhead switches working at this stage, so it appears to be something with the FDS switches and leds.I guess it will give you a lot more work for you on the updates if I keep to P3D version 4.5 , so please let me know and I can change over to V5 Thanks..................Brian W.
Thank you Jeehell for your last update. unfortunately I have a strange issue with engine oil pressure indications, 133 psi with the needles far beyond the gauges.I'm using P3D v 4.5 hotfix 3 and 3 computers.Can you help me to find a solution?Best regardsBen
Just done some testing to see if I can give some useful information :V.53.01 P3D V4.5The sim is all ok if I use Start Engines........The Overhead and Fcu all work and the test leds work on all.Using the Start Cold/Dark I can only turn 1 Bat on and it only turns on the FCU....nothing else.The Test switch will only light up the FCU.So there seems to be a small glitch when using Start cold/dark.Hope this helps .............Brian W
Hi BrianQuote:
Originally Posted by brianwilliamson
I'm also using the FDS HW for my overhead panels. Please have a look earlier in this thread regarding the problem I have. Maybe it is the same issue you have. Please check if things are working correct, when you apply external power first (all switches off as in "cold an dark", just switch on the external power and then start BAT1+2, etc.).
Adrian
HiI added support for ASP3D with P3D V5. update is live on the updater.
Thanks Adrian, but in my situation I am starting up at the Runway and no external power, so I do not think that will help in my case.On ground operating conditions,the APU is started by the aircraft batteries or aircraft batteries in combination with Transfomer Rectifier Units as far as I am aware.Cheers..........Brian W
Hi JL, thanks! Question : do we also reinstall navdata ?Quote:
Originally Posted by jeehell
B53.1, the weather radar works perfectly with asp3d! https://i.imgur.com/aaRMYUk.jpg
@asessa: does it work with TrueSky (enhanced Atmo) or legacy mode, or even with both??!!
ASP3D works with both engines but it has some limits with EA.I'm using legacy mode with ASCA and ENVSHADE . When EA will be official (now it's a beta) i will switch on EAQuote:
Originally Posted by bbruechmann
Thank you for your answer, but i meant if the radar echo of FMGS works also if enhanced athmosphere is enabled. I know that our AS works with both, but i guess we canīt get wx radar echos with EA because of the actual limitations.Quote:
Originally Posted by asessa
Yes it'works. (ASp3D + EA)https://i.imgur.com/ofNtFCy.pnghttps://i.imgur.com/FXZN2TO.pngQuote:
Originally Posted by bbruechmann
ahhhh cooooooooooooooool. Thank you Jean-Luc !!!!! (And HiFI of course)Quote:
Originally Posted by asessa
Hello, I am using P3D v5 and ASP3D Beta 2. Also FMGS 53.1. But here it doesn't work. I have only this file in my WXR-Folder: current_wx_snapshot.txt No *.dat-files. Any help for me? Best regards , ThorstenQuote:
Originally Posted by bbruechmann
Same here. Iīve tried yesterday and the radar echo wasnīt appearing, but the *.dat files are created in the wx folder. I will see if i can find the culprit.Quote:
Originally Posted by Totti
In ASP3D do you use live weather ?
Yes, P3D v5 and live weather.Quote:
Originally Posted by asessa
For me it's all ok, i don't why you didn't have wxr data. Have a look at log filesQuote:
Originally Posted by Totti
Hi allall of a sudden my sound module disapeared and I can't setup my sound for fmgs. Has anyone the same issue?BRStefan
JL, after install of new Version 53.1 i had the issue, that the engine arenīt Spooling up for take off. Only with ENG anti ice they got power. On top of that the Aircraft isnīt lift up at v2. Iīve reinstalled simconnect but the issue was still there. Iīve re-installed Version 53.0.1 and everything is ok. It seems that the FWB-modul of the new Version isnīt working correctly, I have P3D V5 HF1 with EA and AS. The wx Radar was working in V53.1.May you could check.