• 737 Side Wall Dimensions

    Tutorial Presented by Member Ivar Hestnes

    Ivar Hestnes, contributes interesting information on the side wall. Sometimes information on sidewall is hard to find...so sit back and enjoy this.

    Well this is not actally a tutorial but the measurements I have on my sidewalls. I built this by looking at pictures so the measures are in no way accurate to the actual aircraft, but still looking OK.

    I have measured after building was completed so doublecheck and adjust if needed

    Good luck and have fun.

    There is one measurement missing on the drawing. There is a line at 41mm and a line at 19 mm with a 7,5mm piece at a 45 degree angle. So the distance between 41mm line and 19mm line at a 90 degree angle is 50mm.