Results 1 to 7 of 7

Thread: update

  1. #1
    150+ Forum Groupie Radar's Avatar
    Join Date
    Jan 2007
    Location
    CANADA
    Posts
    282
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    update

    First of all. I would like to thank all of the guys and gals that have done all the leg work for us all to use. I really apreciate all of the hard work that you've done.

    For me it's try to copy and enjoy. Hopfuly I will come up with some ideas of my own to share with you all.

    OK. I done my MIP stand. I"am in the process of marking my MIP for cutting. I have a few questions

    1/. I'm looking for MIP lables of actule size that I could print and put it on my MIP to see if everythings in the right place before I start cutting.
    2/. From the top of the middle screen on the mip to the top of the mip. What would be that mesurement?

    Again guys thanks very much. Mike
    http://www.thefreeemoticons.info/images/flags/smilies0949.gif

  2. #2
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,493
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi Radar,

    I have all of the bitmap labels that I made for the 737NG ready for printing but they are all quite large files around about 1meg each. What I was planning to do is to put them all on a CD and post it to Matt so he could put them on the site and make them available to all for download. If you tell me which ones you specifically want, I could email them direct one at a time. Send me an email so I can reply...
    Are you doing an NG? or a 'Retard, Retard, Retard, uh, I mean Airbus

    Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  3. #3
    150+ Forum Groupie Radar's Avatar
    Join Date
    Jan 2007
    Location
    CANADA
    Posts
    282
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    LOL. Airbus...DoH! You would think they could afford to add a steering wheel to the finish her off. Just kidding

    I'am doing a Westjet 737NG. She flies out of my Local airport about 3 minutes from my home. I can actuly see the pilot in the cockpit when they land over my house .

    Thanks Westozy. Maybe I can use these>>>>>>>>>>>

    http://personales.ya.com/micabina737...descargasi.htmNote: the information freely available in this section is only intended for personal use. Whith respect to the work done by the auther.

    Is this what I could use mate?. Do they look like there the real size I need?

    Mike
    http://www.thefreeemoticons.info/images/flags/smilies0949.gif

  4. #4
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,493
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    That's a handy link, those pics are similar to mine and along the same lines although mine are all colored grey, the same color as the PVC sheeting I use for all my panels.
    I always make the parts and panels first then adjust the size of the printing to suit the part. It's easy to resize images in a program like Photoshop, you can size the images exactly. My article in the May issue of Computer Pilot magazine explains it all in detail. I have a complete set of Boeing 737NG manuals in PDF form and they are a great source of detailed panel images, I'll post them to Matt aswel, they would be a handy download for everyone.

    Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  5. #5
    150+ Forum Groupie Radar's Avatar
    Join Date
    Jan 2007
    Location
    CANADA
    Posts
    282
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Ok Thanks Westozy.

    Printing paper? Low gloss or mat.?

    Mike
    http://www.thefreeemoticons.info/images/flags/smilies0949.gif

  6. #6
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,493
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I bought a box of 100 adhesive A4 labels in matt finish for AUD$30 and my first print job at home was successful, see the May CP mag. The best adhesive I found was called "Dataflex" made by Jac. It is semi-gloss and waterproof. The print company I was using got sold and they no longer stock it, that's why I changed to doing it myself on my own printer. The A4 labels are not waterproof but if they end up damaged it's easy to just print another one. Maybe a spray laquer would seal them permenantly, who knows?

    http://www.dalton.com.au/our-range_detail.aspx?view=83
    This film is expensive and the company has minimum purchase amounts which changed my approach to this task.

    Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  7. #7
    150+ Forum Groupie Radar's Avatar
    Join Date
    Jan 2007
    Location
    CANADA
    Posts
    282
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Ok Thanks

    Mike
    http://www.thefreeemoticons.info/images/flags/smilies0949.gif

Similar Threads

  1. 767-300 Update 7
    By Drewsta in forum My Cockpit Update
    Replies: 6
    Last Post: 11-02-2009, 04:02 PM
  2. 767-300 update 6
    By Drewsta in forum My Cockpit Update
    Replies: 3
    Last Post: 10-23-2009, 07:12 PM
  3. 767-300 update 5
    By Drewsta in forum My Cockpit Update
    Replies: 1
    Last Post: 09-29-2009, 03:33 AM
  4. 767-300 update 4
    By Drewsta in forum My Cockpit Update
    Replies: 0
    Last Post: 09-28-2009, 09:00 AM
  5. Little update
    By ivar hestnes in forum My Cockpit Update
    Replies: 7
    Last Post: 01-05-2008, 04:04 PM