Results 1 to 5 of 5
  1. #1
    imported_737nut
    Guest

    Flap Notches setting inop

    Hi Alan,
    Out of the blue my flaps just quit working. It shows the sensor number changing and corresponding output to FS changing but my flaps don't move. Also, in the cal screen, the 'set flap notches' is not available. This was in vs 4.1, i updated to 4.1.3 and am having the same issues. Very strange since i have had about 500 hours trouble free with the flaps settings.
    Thanks,
    Rob

  2. #2
    alandyer
    Guest

    Re: Flap Notches setting inop

    Rob,

    Will check it out on my system.
    Been a few weeks since I used my throttle.
    Pulled throttle out of sim to do upgrades.
    You know how it is - next new sim feature is just over the horizon

    Regards,
    Alan.

  3. #3
    imported_737nut
    Guest

    Re: Flap Notches setting inop

    Alan,

    I unassigned it, shutdown, restarted the software, reassigned and now all is well.
    Next question, i sometimes fly 3 and 4 engine aircraft but since my 2throttles
    go thru fs2phidget, fsuipc doesn't 'see' them and therefore does't MAPP them all together like the option is there to do. SO i have t contol the other engines with the keyboard. Any suggestions?
    Thanks,
    Rob

  4. #4
    alandyer
    Guest

    Re: Flap Notches setting inop

    Rob,

    Steve Diamond has made same request.
    Am adding option to tie throttles.
    Want to do this my reversor levers.
    Coming soon to a screen near you !

    Regards

  5. #5
    imported_737nut
    Guest

    Re: Flap Notches setting inop

    Quote Originally Posted by alandyer View Post
    Rob,

    Steve Diamond has made same request.
    Am adding option to tie throttles.
    Want to do this my reversor levers.
    Coming soon to a screen near you !

    Regards
    Great news!!

    One other thing, isn't there always !

    I have my reversers on micro switches and not pots. You helped me set this up when you were here last time and now it it has disapeared like the flaps did. I can't get it to work:confused: We had it so when the switch was activated, it sent -4096 to FS which gave it reverse thrust/
    Rob

Similar Threads

  1. Run-time error '401' when Setting Flap Gauge
    By Mark in forum FS2Phidget Users
    Replies: 2
    Last Post: 03-18-2008, 09:49 AM
  2. DH/MDA Setting
    By Brian in forum PM General Q & A
    Replies: 1
    Last Post: 06-26-2007, 03:08 PM
  3. Rev Thrust inop w/ 3.09
    By imported_737nut in forum FS2Phidget Users
    Replies: 4
    Last Post: 06-01-2005, 04:21 AM
  4. [LOGIC] Switch inop + misc
    By null null in forum PM General Q & A
    Replies: 0
    Last Post: 12-01-2004, 03:27 PM
  5. FS2 2.0 inop
    By imported_737nut in forum FS2Phidget Users
    Replies: 27
    Last Post: 11-24-2004, 01:30 AM