Results 1 to 5 of 5
  1. #1
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    898
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    new product: afds module

    Now in the shop: our new AFDS module

    Printed circuit board with dual color (red and amber) pushbuttons, test toggle switch and on board SMD leds for backlight of the front panel.

    The AFDS module is designed to be used with the CP flight MIP board, but can also work with others. Screw terminals on the back of the module allows easy connecting to your interface board.

    The afds can be used with other common cathode interfaces as well.

    * printed circuit board, industrial quality
    * dual led pushbuttons
    * toggle switch ( mom/mom) for test function
    * on board SMD leds for backlighting
    * screw terminals for easy connection to interface board
    * desgined for CP flight MIP board, but will work with other common cathode boards too.
    * fits into the DESKTOP panel series and MIP PRO

    http://www.flyengravity.com/page/shop/8/73

    manual:
    http://www.flyengravity.com/download/29



    Stef




    www.boeing737ng.com
    ___________________________
    The Dutch 737 Simulator Project

  2. Thanks Geremy Britton, Joe Cygan thanked for this post
  3. #2
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    3,147
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new product: afds module

    Cool stuff!
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  4. #3
    75+ Posting Member jongas's Avatar
    Join Date
    Jan 2009
    Location
    Bristol, UK
    Posts
    123
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new product: afds module

    Sorry to bring up an old topic, I have a pair of these put did not realise that the phidgets led64 card I use was common anode - so wiring these up gives some crazy results!!

    Does anyone have a suggestion for an alternative board to use?

    I don't use any CPflight bits at present so I think that would be too costly to switch anything else considering what I payed for these modules was low.

    Thanks

    Jon

  5. #4
    150+ Forum Groupie
    Join Date
    Apr 2007
    Location
    Alberta, Canada
    Posts
    278
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new product: afds module

    Hi Stef,

    A question. I use FS9 and the PMDG 737 so I'm wondering if there is a way to connect the afds so it will work with PMDG? The same with your 6 pack, is there a way to connect to PMDG? I use Leo's boerds and a Hagstrom for interfacing switches. I don't have any output cards as such.

    Thanks

    Rob

  6. #5
    500+ This must be a daytime job
    Join Date
    Nov 2005
    Location
    rotterdam, the Netherlands, Europe
    Posts
    898
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: new product: afds module

    Quote Originally Posted by mounty View Post
    Hi Stef,

    A question. I use FS9 and the PMDG 737 so I'm wondering if there is a way to connect the afds so it will work with PMDG? The same with your 6 pack, is there a way to connect to PMDG? I use Leo's boerds and a Hagstrom for interfacing switches. I don't have any output cards as such.

    Thanks

    Rob
    As far as i know, right now the only way to make the sixpacks and afds work correctly with the pmdg 737 for fs9 is by using the driver made by Lefteris Kalamaras (PMDG's former lead developer) that can be found here: http://www.flightsimlabs.com/interfa...ht-mcppro-fs9/

    It works together with the cpflight MIP737 board.

    Stef
    www.boeing737ng.com
    ___________________________
    The Dutch 737 Simulator Project

Similar Threads

  1. Engravity AFDS
    By Clive in forum I/O Interfacing and Hardware
    Replies: 7
    Last Post: 03-15-2011, 06:47 PM
  2. Afds
    By Tony in forum F/E General Q & A
    Replies: 8
    Last Post: 11-16-2010, 03:02 PM
  3. My new CNC and AFDS panel
    By Wendy in forum CNC Discussion
    Replies: 44
    Last Post: 02-10-2010, 11:28 PM
  4. B737 AFDS panel
    By belgianguy in forum I/O Interfacing Hardware and Software
    Replies: 6
    Last Post: 01-21-2009, 04:17 PM
  5. new product announcement: pcb afds switch unit
    By dnoize in forum F/E General Q & A
    Replies: 1
    Last Post: 12-08-2008, 03:50 AM