Results 1 to 4 of 4
Thread: Offset question
-
12-09-2008, 06:56 AM #1
- Join Date
- Dec 2007
- Location
- New Zealand
- Posts
- 52
Offset question
Hi all
I use gfdisplay to drive the indicator leds on a gf t8 module. I want to use one as a stall warning. I am currently using offset x36c which seems to give me a stall warning, but the led seems to stick on - once the stall recovery has occurred the lamp remains. If I then stall again it will go out.
Am I using the right offset?
Thanks
JamesCH Yoke
CH Pedals
2 Saitek TQ`s
Opencockpits multiradio
GF LGT + T8
BU0386x and custom autopilot control panel
Basic pedestal and mip for generic GA sim in progress..
-
12-09-2008, 07:19 AM #2
- Join Date
- May 2008
- Location
- Earth
- Posts
- 288
Hi
the only offset I can find for the stall warning is 0x036C, so you are correct.
I suspect the problem is in your code. Can you post the code so that we can have a look at it?Fritz -> Helicopter Cockpit Builder
(FSX | TH2Go | Arduino | Air Manager Avionics | CNC)
-
12-09-2008, 02:23 PM #3
I am using that offset for stall on the FSX Learjet45 and it works correctly.
I suggest that you use FSInterrogate ( included in the FSUIPC SDK ) to monitor this offset then you will know whether the problem is with the Sim Model or your interface code.
CheersDave Ault
http://www.learjet45chimera.co.uk
-
12-10-2008, 06:18 AM #4
- Join Date
- Dec 2007
- Location
- New Zealand
- Posts
- 52
Hi and thanks for the replies.
Further analysis of this issue shows that the light consistently comes on with the first stall warning. However, I`m using the fast flash syntax in gfdisplay to flash the light for 3 seconds followed by a steady illumination. It seems to depend on the state of the light when the stall condition clears. If it is flashing and off it remains off but if it is on (either flashing or steady) it will stay on.
I`m not near my fs pc at the moment but will post my gfdisplay.ini tomorrow. I will try removing the flash syntax and see if that helps.
Thanks again
JamesCH Yoke
CH Pedals
2 Saitek TQ`s
Opencockpits multiradio
GF LGT + T8
BU0386x and custom autopilot control panel
Basic pedestal and mip for generic GA sim in progress..
Similar Threads
-
Offset Question
By cpeckinpaugh in forum FS2Phidget UsersReplies: 5Last Post: 04-18-2005, 06:37 PM -
Offset again
By lucas1971 in forum FS2Phidget UsersReplies: 3Last Post: 12-09-2004, 01:49 AM -
Question for Alan re: offset trigger ranges
By rangepig in forum FS2Phidget UsersReplies: 3Last Post: 11-22-2004, 10:46 AM
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...