A320 FMGS B34

[filippoporcari]

ben the ground speed mini is already implemented!
fil

[jeehell]

Hello, a big thank you to Jeehell for this nice version of the FMGS Software the FBW System is now perfect and the aircraft feels very good in flight but i have a question about the OVHD. In Version B30 it works with my PC config without any problems but now the CPU load is at 100% and the reaction time for switches is sometimes 5-10 sec. can it be the the load of the OVHD is now so big ? or is there a config problem by my configuration. And another problem is that the anti collision light do not work but the switch in OVHD is on. In another thread i has read that a new user guide is on the road can you tell me something about the date of finishing ? BR Veit

Hi,

I hope the updated user guide will be there for next version.
The lights effect are visible only if you have the "effects" file copied in the effects folder of FSX. It should be done automatically during installation, but you can force it manually.
As for the 100% CPU load, I need more details such as your setup specs, which process exactly is taking up CPU etc...

Regards,
JL

[Stephan Schwarz]

. In Version B30 it works with my PC config without any problems but now the CPU load is at 100% and the reaction time for switches is sometimes 5-10 sec. can it be the the load of the OVHD is now so big ?

Veit, I have the same from time to time (very seldom, still using B33). It helps when I reboot my 3 computers, after new bootup this issue is gone. Please check and inform if this happens every time you try to fly or only from time to time?

Regards,
Stephan

[startrail]

Hi,

I hope the updated user guide will be there for next version.
The lights effect are visible only if you have the "effects" file copied in the effects folder of FSX. It should be done automatically during installation, but you can force it manually.
As for the 100% CPU load, I need more details such as your setup specs, which process exactly is taking up CPU etc...

Regards,
JL

I have the same. Problem with nav lights and Beacon. The effects are copied and still no response. I have also certain occuracne where the the CPU is at 100 %.

[A319vmlw]

Hello Jeehell thanks for quick answer. The network load was only 4% so that is not the problem, i have the same problems as startrail see thread before the issue was only sometimes like a peak in the cpu load and my nav lights an the beacon do not work. The effects file are in the effects folder. Can it be a context between the cpu load an the issue with the light effects? I will look in the evening to locate the prozess who has max. cpu load but i think i have seen that ovhd has 60% cpu load in idle. I inform you later. BR Veit

[romeow]

I face the same problem with EXT LT. I'am mostly able to switch the NAV LT and Beacon ON but no way to switch them OFF!
NOSE Taxi doesn't work at all. All fx files are copied to the EFFECT folder of FSX.

Concerning the CPU workload I'll monitor.

Regards
René

[stefangr]

Is there any chance to switch the marker sounds (inner/middle/outer) on and off? Currently they are always on.

Thanks
Stefan

[OmniAtlas]

Is there any chance to switch the marker sounds (inner/middle/outer) on and off? Currently they are always on.

Thanks
Stefan

I think there may be a way to turn off the sounds via the ACP default keys in FSX/P3D -- I just haven't found them yet.

Thanks for the update JL -- the night mode is looking very sweet!

Request -- would it be possible to implement a re size of the modules (ND/PFD/OHD, etc) also using the middle mouse scroll button? This way when we want to enlarge or reduce the size of the modules they retain the aspect ratio (sometimes difficult when using the click to drag window approach).

Thank you.

[OmniAtlas]

Bug? Still having trouble maintaining speed at FL370 -- for some reason the left engine has a lower % N1 output and is drags along until the A/THR kicks in.

Not too sure if this is a control (using the emulated joystick) or the new aircraft model problem.

Everyone else cruising okay? I can only reach .730 mach.

[OmniAtlas]

Edit -- found the problem -- its the 'smooth wind changes' with FSUIPC...it was enabled.

This option has to be DISABLED for optimum performance!

JL -- please add this to your documentation!