Results 11 to 19 of 19
-
03-14-2010, 09:50 AM #11
- Join Date
- Dec 2009
- Location
- Canada NL
- Posts
- 58
-
03-14-2010, 10:05 AM #12
- Join Date
- Dec 2009
- Location
- Canada NL
- Posts
- 58
Re: FSX in 3D is it any good? # monitors ?
OK, so with three monitors trackir is not really required? Right now I'm on a tighter budget since I bought a real plane. Well ,I
had a two seater already, but needed something a little bigger, so I now have four seats . I think I will start out with a single
large 120hz lcd or tv with TrackIR and see how tha works for me. Right now I only want to learn to use IFR instruments.
-
03-15-2010, 12:02 AM #13
Re: FSX in 3D is it any good? # monitors ?
In my opinion...
TrackIR is not required when using 3 monitors, especially if you are undocking windows for each of them. You can get 180 degrees FOV with just 3 monitors when using the undocking window method and proper zoom settings. I don't yet know how well this will work with the 3D surround. My guess is that it's workable but Flight Simulator is the only program that I'm aware of that has the ability to undock and move view windows. Most games will simply span a single view across the 3 screens. This is fine in Flight Simulator too, but you don't get the FOV you could achieve by using multiple view windows, so the TrackIR would come in handy for a single spanned view on 3 monitors. I'm also curious if there will be bezel management software included in the 3D surround release. I would think this would be important for 3D image alignment. I've experimented with 3 open windows on a single 3D monitor to get an idea on how the 3D effects will line up. The 1st thing I noticed was the 2D white window border lines jumping out at me, but monitor bezels might actually help in this case when using 3 actual monitors. I was unable to get a lined up image well enough to feel good about it, but again, bezels may fix this.
I also experimented all weekend using a 3D projector and 3D Vision with and without TrackIR. I actually had better results this time around with the TrackIR. I adjusted the speed settings and killed every axis except pitch and yaw which really helped. I'm ordering some of the reflective dots in an attempt to mount them somehow to the 3D glasses as I don't always wear a baseball cap or headphones when flying the virtual skies. As much as I'd love to use 3 projectors in 3D, the cost and questions of undocked window compatibility make me think the TrackIR on a single display is a great solution. 3D was great without the TrackIR as well, and I'll probably only enable TrackIR for takeoffs and landings.
Just a side note...
I moved my projection screen around and tried to find the best position for it when using 3D. I tried it about 5 feet out in front of me, as well as hanging it just about my instrument panel. I finally moved it directly behind my instrument panel (actually touching the back of it and resting about 18 inches below it). In this position, I was able to adjust the convergence settings (F5 and F6) to make the instrument panel of the virtual cockpit "blend in" with my actual panel. I was using the F-18 and adjusted my eyepoint to only allow me to see the HUD of the virtual cockpit which gave the appearance of it resting on top of my actual instrument panel! It was really a remarkable effect merging me and my pit into the flight simulator world! I then lowered my actual canopy to "meet" the virtual windscreen and I would go as far as to say that it's the closest I've felt so far to the "suspension of disbelief" and before this, I was using 3 projectors for a 180+ degree FOV...only in 2D. So to finally answer the question of this post. YES, 3D is un-freaking believeable when properly set up.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikesroxiedog13 thanked for this post
-
03-17-2010, 09:59 AM #14
- Join Date
- Dec 2009
- Location
- Canada NL
- Posts
- 58
Re: FSX in 3D is it any good? # monitors ?
OK so now I'm sold on the 3D thing, but I am going one large TV only with a smaller 19" square lcd for instruments only. Can I do a 120hz main screen and 1 60hz small screen for instruments? If not then what will I need? Any suggestions for hardware appreciated too as I returned the system I had.
-
03-17-2010, 08:06 PM #15
Re: FSX in 3D is it any good? # monitors ?
You definitely can mix and match monitors with different refresh rates, but I haven't been able to use an additional monitor while running 3D on another one. However, the 3D vision surround drivers that are supposed to be released soon may allow it. We'll have to wait and see unless someone else has read something about it. The other way around it would be to use a networked PC for your instruments and some 3rd party software like Project Magenta. This is the route I've gone and am impressed with how well it works. I did it mainly for better performance. The frame rate tends to drop off when dragging another window of any kind over to another monitor on your primary flight sim system, so networked PC's are a highly used method. You also don't need a monster system for your instrument panel. I'm using an older system that was basically collecting dust otherwise. One downfall of a non-3D monitor is that the image of the non-3D monitor through the LCD shutter glasses gives a similar effect as looking at an LCD screen through polarized sunglasses. It's not a game ending result, but it's just something to get used to. Luckily, my monitor is low enough that I can manage to look "under" the glasses to see the instruments and through the glasses for the outside 3D view. Using a CRT for instruments may do the trick though! (I'll have to try that). Anyway, your large 3D tv idea should have a great result!
-
03-18-2010, 04:01 AM #16
- Join Date
- Sep 2007
- Location
- Scotland
- Posts
- 81
Re: FSX in 3D is it any good? # monitors ?
Hi Airhogg,
Great thread...
Can you describe how the 3D shutter glasses affect the appearance of the physical cockpit?
Ian
-
03-18-2010, 10:56 AM #17
Re: FSX in 3D is it any good? # monitors ?
Hi Ian!
The only 2 negative effects through the shutter glasses that I have noticed are:
1. Everything is slightly tinted....very much like weak sunglasses. Although this is a negative, it's not bad by any means.
2. Viewing non-3D LCD's (glass cockpits or whatever) may appear with a little color distortion. To me it's still worth the 3D effect, but there may be a screen filter or something available that I'm unaware of that could remedy this.
The remainder of the cockpit is fine (just tinted), but the fact that the glasses are now refreshing at 60hz per eye, there is no noticible flicker as there was before with the lower refresh rate systems. I'm using the Nvidia 3D Vision setup and the glasses have much wider lenses....very much like wearing sunglasses and 1 of my sessions was about 2 hours long. I had no eye fatigue or discomfort, but I'm sure that will vary from user to user.
It really gives a great sense of immersion and IMO is worth trying. I hope this helps!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 DislikesIanH1960 thanked for this post
-
04-10-2010, 06:01 PM #18
- Join Date
- Apr 2010
- Location
- Toronto
- Posts
- 1
Re: FSX in 3D is it any good? # monitors ?
This is an interesting thread.
I just purchased the 3D Vision Shutter glasses myself, and after a few days of messing around with other games, started up the old FSX to see how it would look.
I downgraded my main monitor from a 24 inch 1920x1200 to a 22 inch 1680x1050 to get the 120hz. But the 24 inch still makes a good 2nd screen for realistate.
Eventually, I would love to upgrade my 285 GTX for two GTX 480's in SLI (when they're available), and then expand to using 3 screens.
I flew for a bit in the F-18, and the 3D was amazing! Although, I found that I do get the error message on the 2nd monitor about running out of memory, and that stereo is turned off, but it still works fine for dragging out the ATC messaging, and GPS.
The one problem I did notice, is the same problem that is mentioned on the screen when the game starts up, about the glowing objects not looking correct. Boy, they sure are right about that! And unfortunately, the glowing objects show up next to the runways that you are trying to land at. It's very distracting, almost like the polarity on the glow is reversed, so the glow appears closer, instead of in the correct position.
Maybe I'm speaking too soon and haven't checked for an update to this problem yet. Does anyone else get this problem with the glow being so overwhelming that it distracts from being able to make an accurate approach? Or is it just me? Is there a solution?
-
04-11-2010, 02:57 PM #19
Re: FSX in 3D is it any good? # monitors ?
There's not yet a fix that I'm aware of on the 3D objects placement. The only "remedy" I've been able to use is to rename the "halo.bmp" file to something like "halo backup.bmp". This file is for airport lighting that is only rendered in 2D. If you rename that file, the airport lights (runway, taxi, beacon...etc.) will not display at all. This is a pretty rough fix, but it makes it playable in 3D at night. My guess is that someone that's programming saavy will fix this since 3D is becoming more and more popular. It's really the only 3D downside I've found in FSX. I purchased the VRS Hornet add-on and the light from the fire in the missles are also in 2D, but the smoke appears to be correct. It's just a matter of time.
Similar Threads
-
3d glasses are they as good as multiple monitors?
By roxiedog13 in forum General Builder Questions All Aircraft TypesReplies: 4Last Post: 12-11-2009, 09:05 AM -
Good Day All
By DarylL in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 2Last Post: 12-06-2008, 05:13 PM -
good day
By 747sim in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 22Last Post: 08-06-2008, 08:29 PM -
Old but still good
By zenandzen in forum Pilots Lounge - Let your Hair downReplies: 0Last Post: 01-31-2008, 10:13 PM -
Is FSX any good???
By Simran737 in forum General Builder Questions All Aircraft TypesReplies: 11Last Post: 01-06-2008, 11:15 PM
6yo FACECAST LINK 14year GIRLS FORUM : ( )...
YWM RAR JAILBAIT ZOOM