Re: Level-D 767 G-Throttle Switch Interfacing
Quote:
Originally Posted by
Boeing 747 Flyer
Also, the stab trim cut out switches appear to be opposite to what they are set in my TQ; ie they're on when I have set them to off.
That's the problem with these toggle commands. You have to synchronise your hardware with the Level-D panel: close FSX, set your hardware switches in the other position and start again.
If I were you I would cut the wires and use a Mastercard, SIOC and lekseecon. Then you are really in control...
My 2 cts...
Nico
Re: Level-D 767 G-Throttle Switch Interfacing
Hi Nico,
I think I can live with that, I will start pretty much all of my flights with the stab trim switches set to norm anyway, and with the fuel cutoff switches set to cut. No problems!
I take it I can't use a toggle function for Altn Stab trim control? We'll need some sort of repeater function.
Re: Level-D 767 G-Throttle Switch Interfacing
Quote:
Originally Posted by
Boeing 747 Flyer
We'll need some sort of repeater function.
In FSUIPC you will find "repeat while held" in the buttons tab...
You only have to make a SIOC script that translates these button presses into increments and decrements within the range 0..140 expected by my lekseecon variable.
Nico
Re: Level-D 767 G-Throttle Switch Interfacing
Hi Nico,
All is now done in terms of switches, thanks very much for your help!
Re: Level-D 767 G-Throttle Switch Interfacing
Quote:
Originally Posted by
Boeing 747 Flyer
thanks very much for your help!
You're welcome.
Hope to see some pictures of your Throttle, and ofcourse what you think of it.
Nico