Results 11 to 20 of 43
Thread: 727 Glareshield Rack Restored
-
04-01-2007, 10:40 PM #11
That code writing and programming amazes me too. It's very difficult for me to think about what goes on in PM systems. I'm more of a builder and not much of a programmer. If I can't see it in front of me, or on a piece of paper with a schematic, I'm a bit behind the curve.
That's the part of this project that I think will eventually give me fits down the road a few months when I'm getting to that stage.Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
04-02-2007, 09:07 AM #12
Hey Gwyn,
Sign me up, I will be customer #1...
Trev________________________
Trevor Hale
-
04-02-2007, 09:11 AM #13
- Join Date
- Oct 2005
- Location
- Holley, New York U.S.A.
- Posts
- 1,776
Hi Gwyn make me customer #2! So.... When can I order my panels?
Bob Reed
-
04-02-2007, 07:07 PM #14
Wow, business is booming already, what do you need?
Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
04-02-2007, 07:20 PM #15
Order #1
I could use a flap and spoiler panel, I can provide pictures.. By the way I need the flap to work by lifting move to detent and release
Spoiler Up/Position #1 / Position #2
Let me know when it's ready
Trev________________________
Trevor Hale
-
04-02-2007, 08:18 PM #16
New supports for the rack, and working on the top and the edge trim now.
Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
04-02-2007, 10:06 PM #17
Your not alone Michael!!
This is my first post so First let me say HELLO to all COCKPIT BUILDERS on behalf of the PROJECT 727 team. You can visit our Boeing 727 simulator at: www.xsn.net/project727 . The PROJECT 727 TEAM is honored to be a member of MY COCKPIT.ORG
If the leading companies in the flight sim industry would commercially develop MIP kits and steam gauge software of first and second generation Boeing and Douglas airliners, I'm sure we would see allot more of these classic cockpits in homes than just yours and mine and a few others. I am looking forward to seeing your MIP with the flight illusion gauges. What a great idea!!!
I agree that "GLASS" is also beautiful, as well as state of the art! My next project will in fact be "GLASS" and that may make it just a little bit easier since MIP's and Software are commercially available. But I must admit that, as in your case, "IRON KNUCKLE FLYING" in a classic Boeing Airliner is what fires my blood...and I'm sure of many, many others!! Each time I take off along with me comes the adventure, glamor, romance and excitement of early commercial aviation. WHAT A THRILL!!!!!!!!!
Whats the bottom line? That we are all so very lucky to live in a time where flight simulation is a "reality" and a wonderful hobby that permits us, in a way, fulfill our dreams of flight in our favorite aircraft. We are so much luckier than previous generations!!!
Michael, your on the correct flight path... can't wait to see your sim soaring!!!
Joe Maldonado
PROJECT 727
www.xsn.net/project727
Last edited by project 727; 04-02-2007 at 11:02 PM. Reason: WAS NOT FINISHED
-
04-03-2007, 12:18 AM #18
Trevor, email the details and I'll see if it is feasible!
Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
04-03-2007, 03:42 AM #19
Thanks Joe! Always glad to hear good things from a Pro! I have a long road ahead of me.
The one concession I'm making with regard to glass in the cockpit is the LCD screen I'll be using for the HSI display.
I'll be using the Reality XP Sandel 3380 EFIS display. No one makes a simulated mechanical HSI so I really have no other choice. I'd be willing to pony up the money for a simulated HSI, but I'm not holding my breath for one to come to markt anytime soon.Last edited by Michael Carter; 04-03-2007 at 03:47 AM. Reason: speeling!
Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
04-03-2007, 01:15 PM #20
Similar Threads
-
Generic rack rails and GoFlight modules
By headshrink in forum General Builder Questions All Aircraft TypesReplies: 0Last Post: 08-25-2009, 05:59 PM -
B-737 Fire Rack for the Pedestal
By Michael Carter in forum My Cockpit UpdateReplies: 5Last Post: 11-28-2007, 11:06 PM -
New Radio Rack
By Michael Carter in forum My Cockpit UpdateReplies: 9Last Post: 07-26-2007, 03:12 PM -
Glareshield rack arrives...
By Michael Carter in forum My Cockpit UpdateReplies: 4Last Post: 03-31-2007, 09:29 AM
Candid connections: Platform for casual relationships Live Women Prime Сasual Dating
Super Сasual Dating - Genuine...