Results 11 to 19 of 19
Thread: GC F6 page questions
-
02-12-2007, 10:22 AM #11Fabrizio De NapoliGuest
Re: GC F6 page questions
Hi Ray,
in the first picture (F6 page) i think there are also f/o PFD and ND and i
didn't move or resize anything, just to show that everything is ok.
The second picture it's already on F6 page too, this is the problem. As you
can see, the pfd, nd and eicas don't show anymore.
Thanks
Fabrizio
-
02-12-2007, 10:22 AM #12Ray ProudfootGuest
Re: GC F6 page questions
Ah right. I didn't mention first officer displays as I didn't think you
would include them and you didn't mention that you had.
I think I know what the problem is. I have setup my system so that nothing
comes on until I switch on the batttery and avionics. This line is the
problem....
StartElecOff=On
Change it to StartElecOff=Off
Then I think the display will come on and you should be okay.
This is one of those horrrible double-negatives that Enrico uses and which I
have to think about every time I make a change. Set something to off = off
really means switch it on! Arrgghh!
Cheers.
"Fabrizio De Napoli" wrote in message
news:411422.82041@wb.onvix.com...
> Hi Ray,
> in the first picture (F6 page) i think there are also f/o PFD and ND and
i
> didn't move or resize anything, just to show that everything is ok.
> The second picture it's already on F6 page too, this is the problem. As
> you
> can see, the pfd, nd and eicas don't show anymore.
>
> Thanks
> Fabrizio
>
-
02-12-2007, 10:22 AM #13Fabrizio De NapoliGuest
Re: GC F6 page questions
Hi Ray,
I already had changed that line to off, if not the instruments were off also
with 430 build.
I really can't understand what's the problem.
I now tried to change the line ExpandedF6= to Off and now the instruments are
shown in 437f too (no f/o ones of course) but they are linked together.
I'm really out of ideas
Thanks
Fabrizio
-
02-12-2007, 10:22 AM #14Ray ProudfootGuest
Re: GC F6 page questions
Hi Fabrizio,
I'm out of ideas too then. ExpandedF6 mode must be set to on otherwise it
won't work.
Sorry, I suggest you contact the support address unless anyone else can
help.
Cheers.
"Fabrizio De Napoli" wrote in message
news:411461.82041@wb.onvix.com...
> Hi Ray,
> I already had changed that line to off, if not the instruments were off
> also
> with 430 build.
> I really can't understand what's the problem.
> I now tried to change the line ExpandedF6= to Off and now the instruments
> are
> shown in 437f too (no f/o ones of course) but they are linked together.
>
> I'm really out of ideas
>
> Thanks
> Fabrizio
>
-
02-12-2007, 10:22 AM #15Enrico SchirattiGuest
Re: GC F6 page questions
replied via e-mail
"Fabrizio De Napoli" wrote in message
news:410938.82041@wb.onvix.com...
> Hi all,
> is there a way to zoom in and out EACH SINGLE instrument (PFD,ND,EICAS)on
> F6
> GC page? I can't find a solution until now.
> I also set StandByOnPFDND=On on pfd.ini so i have standby gauges displayed
> on
> F6 page but i can't resize and move them. Is it possible to do it or must
> i run another GC to show only the standby gauges?
>
> Thanks in advance for the answer
>
> Fabrizio
>
-
02-12-2007, 10:22 AM #16Ray ProudfootGuest
Re: GC F6 page questions
It would be interesting to know the outcome of this problem.
"Enrico Schiratti" wrote in message
news:411498.82041@wb.onvix.com...
> replied via e-mail
>
> "Fabrizio De Napoli" wrote in message
> news:410938.82041@wb.onvix.com...
>> Hi all,
>> is there a way to zoom in and out EACH SINGLE instrument
(PFD,ND,EICAS)on
>
>> F6
>> GC page? I can't find a solution until now.
>> I also set StandByOnPFDND=On on pfd.ini so i have standby gauges
>> displayed
>
>> on
>> F6 page but i can't resize and move them. Is it possible to do it or
must
>> i run another GC to show only the standby gauges?
>>
>> Thanks in advance for the answer
>>
>> Fabrizio
>>
>
-
02-12-2007, 10:23 AM #17Enrico SchirattiGuest
Re: GC F6 page questions
I have a hunch some file may be corrupted or in the old format. It isn't
also clear to me whether the old and new versions were run in the same
folder... so I asked for a re-set.
"Ray Proudfoot" wrote in message
news:411606.82041@wb.onvix.com...
> It would be interesting to know the outcome of this problem.
>
>
> "Enrico Schiratti" wrote in message
> news:411498.82041@wb.onvix.com...
>> replied via e-mail
>>
>> "Fabrizio De Napoli" wrote in message
>> news:410938.82041@wb.onvix.com...
>>> Hi all,
>>> is there a way to zoom in and out EACH SINGLE instrument
> (PFD,ND,EICAS)on
>>
>>> F6
>>> GC page? I can't find a solution until now.
>>> I also set StandByOnPFDND=On on pfd.ini so i have standby gauges
>>> displayed
>>
>>> on
>>> F6 page but i can't resize and move them. Is it possible to do it or
> must
>>> i run another GC to show only the standby gauges?
>>>
>>> Thanks in advance for the answer
>>>
>>> Fabrizio
>>>
>>
>
-
02-12-2007, 10:23 AM #18Fabrizio De NapoliGuest
Re: GC F6 page questions
Hi,
I reset with shift-control-R and now everything is ok.
Updating the version made the instruments hide (except standby gagues) and i
couldn't find any solution. It was easier than expected
Thank you all for support
Fabrizio
-
02-12-2007, 10:23 AM #19Ray ProudfootGuest
Re: GC F6 page questions
That's nice to hear. Thanks Enrico for explaining what was needed.
Cheers.
"Fabrizio De Napoli" wrote in message
news:411714.82041@wb.onvix.com...
> Hi,
> I reset with shift-control-R and now everything is ok.
> Updating the version made the instruments hide (except standby gagues) and
> i
> couldn't find any solution. It was easier than expected
>
> Thank you all for support
> Fabrizio
>
Similar Threads
-
STS page introduced now.
By mmakela in forum PM Airbus GCReplies: 1Last Post: 11-20-2010, 11:48 PM -
NEXT PAGE on F-PLN A320
By iperne in forum PM General Q & AReplies: 0Last Post: 03-29-2009, 08:20 AM -
ACT-ive page not switching by itself
By eudoniga in forum PM Airbus MCDUReplies: 0Last Post: 06-24-2008, 09:25 AM -
CDU perf ini page
By sas550 in forum PM General Q & AReplies: 0Last Post: 08-13-2007, 11:29 AM -
RTE and LEGS page
By dornier in forum PM General Q & AReplies: 30Last Post: 02-09-2007, 02:18 PM
Looking for fun companions for travels and adventures? Authentic Ladies Premier Сasual Dating
Top-notch Сasual Dating -...