Results 1 to 5 of 5
  1. #1
    imported_pylet
    Guest

    Where are the Discretes?

    In 4.0.1 and 4.1.1 I can not set discrete values for the AUTO BRAKE SWITCH. Any idea on how to do this? 3.0.2 had a discrete button but that version doesn't have the PUSH TO RESET capability that 4.1.1 does. Looks like one step forward and 3 steps back....bummer

    Lyle

  2. #2
    imported_pylet
    Guest
    Again, I have fixed my own problem somehow, not sure how though. I was messing around inside the cards ini file and for some reason I now have the capability to set the discretes under the calibrate button. Isn't Friday the 13th next week?

    Lyle

  3. #3
    alandyer
    Guest
    Lyle,

    The assignment of discretes are on the calibration form.
    Assign Auto Brake and press Calibrate button.

    I checked FS2PhUIPC401.ini and CDU_MSG is not these.
    Inadvertantly added an older file to zip. In the interm you can always add CDU_MSG
    by using FS variable Editor (fsVariable.exe)

    Offset is 052C,
    Length is 1,
    FS Varable Type is Part of Bitmap
    and Bit Mapping is 1.

    Regards,
    Alan.

  4. #4
    imported_pylet
    Guest
    Excellent, thanks for the reply and information. My CALIBRATE button would not light up so I had to go into the ini file and make it non-digital so it would work. Also I noticed the offset for the nose gear is incorrect in the 401 ini. It should be 0BEC.

    One more thing, were do I get FS variable Editor (fsVariable.exe)?

    Thanks again for all the help,
    Lyle

  5. #5
    alandyer
    Guest
    Lyle,

    Thanks for heads up on nose gear.

    In next release the Discretes button will be on initial screen.
    Relocated by popular demand.

    Regards,
    Alan.