Page 1 of 8 12345 ... LastLast
Results 1 to 10 of 73
  1. #1
    jun
    Guest

    runtime error 5 !!

    Hi I'm a beginner of Phidgets.
    I purchased some modules, and I could run some examples normally.
    I could move servos by using servoslider.exe.
    Then I run FS2Phidget2.1.1, but runtime error 5 is displayed and the program shut duwn. I'm using WIndowsXP professional (Japanese version).
    The runtime error 5 means "incorrect procedure call or auguments" in Japanese.
    Is this specific trouble for Japanese WindowsXP??

    The error comes whichever FS9 is runnning or not. And also the error comes with any phidget modules.
    I tried to run FS2Phidget without connecting Phidget USB cable, then it run normally, and it also gets data from FS9. Then I connected a Phidget USB..... unfortunately the runtime error 5 appears.

    I tested the same way on FS2Phidget30beta, then the runtime error was not displayed and FS2Phidget30beta is running, BUT it can't recognize my Phidget modules.

    Any suggestions??

    best regards

    Junji Hirayama
    Project-J http://hira-yama.com

  2. #2
    Our new friend needs to reach 10 posts to get to the next flight level
    Join Date
    May 2005
    Posts
    8
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Same problem

    Hi Jun
    I'm having the same problem as you. Have you managed to work around or fix it yet? No one has replied to my post either.
    I find that if you try the Beta 3, you get a little bit further, i.e. you don't get the runtime error 5 message but the board isn't completely recognised either. If you play with the "dummy" tab, you can get a landing light flick of the switch in the SIM recognnised in the dummy value. BUT, the real board isn't picked up by fs2phidgets and therefore I'm as stuck as you. Oh dear, a waste of money it appears. I just can't understand how everyone else has it working and yet aren't prepared to help us in the posts. Sad really.
    Regards
    Jono

  3. #3
    luker
    Guest
    Hi Jono and Jun,

    I am also having the same problem as you two are experiencing.

    I have contacted Matt (from Phidgets USA) who has replied and said he will refer the problem to Alan to see if it is a software issue on his end. I guess for now we just have to be patient and await any news.

    Interestingly, I had an older version of the FS2Phidgets software which did not give the error and was recognising the Phidgets modules (the 8/8/8 board in my case) so it seems like it may be a problem with the current release of the software rather than a problem with the modules so I don't believe you have wasted your money.

    Hope we hear something soon.

    Cheers,
    Luke

  4. #4
    alandyer
    Guest
    Hi Junji,

    A pleasure talking with you again.

    Problem is not XP problem.
    It was bad coding on my part.
    I will be releasing a fix in the next 2-3 days.

    My apologies for any inconvenience.

    The new version has a push-to test feature that will illuminate all the LEDs on every InterfaceKit and LED64 cards.

    There is also more comprehensive documentation on the way.
    If this is not available when new version is released feel free to send any question my way on this forum.

    Best regards,
    Alan.

  5. #5
    500+ This must be a daytime job JBaymore's Avatar
    Join Date
    Mar 2005
    Location
    Wilton, New Hampshire USA
    Posts
    601
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by alandyer
    My apologies for any inconvenience.

    The new version has a push-to test feature that will illuminate all the LEDs on every InterfaceKit and LED64 cards.

    There is also more comprehensive documentation on the way.
    Alan,

    I haven't had time to do ANY work on my LED64 board... still working on other issues in the cockpit....... but I have been following the "bug" discussion. THANKS for putting in all the time on this stuff........ freeware developers of such valuable and time consuming software don't get thanked enough for sharing their efforts.

    I am really glad that you have decided to put in the "test" function that Steve suggested. Steve and I have been "talking" a lot about Phidgets since we both hang out in the "Cockpits" forum over at Simviation. Hope you and the Phidgets folks will look seriously at the 360 degree servo / optical encoder suggestion too.

    best,

    .................john

  6. #6
    Steve Daly
    Guest
    Alan,

    Thanks for the "Test" function...it will grossly simplify installations.

  7. #7
    Our new friend needs to reach 10 posts to get to the next flight level
    Join Date
    May 2005
    Posts
    8
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thumbs up

    Quote Originally Posted by alandyer

    I will be releasing a fix in the next 2-3 days.
    Hi Alan
    That's great news. Can't wait for the new version!
    Many thanks
    Jono

  8. #8
    alandyer
    Guest
    Version 3.0.6 is available for download.

    There are some upgrades or should I say, new features:

    - Users will not need an editor to update FSUIPC variables.
    All editing can be performed with FS2Phidget.
    - There is a Push-to-Test button that will light up every LED.
    Will display word "TEST" on every TextLCD row.
    - FS2Phidget uses MS-FS to detect FSUIPC valid values.
    Don't need to look through FSUIPC docs for info.
    Only need offset and size.
    - Two brightness settings for LED64.
    - TextLCD can display the usual text, or an indicator, or a bar graph (like some engine monitors).
    - COM1 and COM2 audio selector support.
    - Users can work with more than one FSUIPC ini file.
    - Possibly better performance.

    All the above, and more, is covered in a comprehensive documentation, that is included in the download zip.
    Documentaton unzpped is 836k
    Documentation includes Quick Tutorial chapter.

    Any bugs and suggestions for documentation should be sent to this forum.
    I am commited to responding to postings within 24 hours.

    Best Regards,
    Alan.

  9. #9
    imported_MattO
    Guest
    >>Version 3.0.6 is available for download.

    Where?

    Looking forward to it
    Matt O.

  10. #10
    alandyer
    Guest
    3.0.7 should be available for download from PhidgetsUSA.com
    I'll check with folks - perhaps problem with my upload.

Page 1 of 8 12345 ... LastLast

Similar Threads

  1. Runtime error 438
    By flygutt in forum FS2Phidget Users
    Replies: 9
    Last Post: 11-17-2008, 08:32 PM
  2. Runtime Error 6, overflow
    By Bob Reed in forum FS2Phidget Users
    Replies: 10
    Last Post: 12-08-2007, 01:58 PM
  3. RUNTIME ERROR issue
    By lineman55 in forum FS2Phidget Users
    Replies: 43
    Last Post: 08-29-2005, 04:25 AM
  4. Runtime error 53 w/ 3.09
    By imported_737nut in forum FS2Phidget Users
    Replies: 6
    Last Post: 05-30-2005, 09:01 PM
  5. runtime error 5 solved ?
    By imported_dnoize in forum FS2Phidget Users
    Replies: 0
    Last Post: 05-22-2005, 12:16 PM