Results 1 to 5 of 5
  1. #1
    Our new friend needs to reach 10 posts to get to the next flight level
    Join Date
    Apr 2005
    Posts
    8
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    8/8/8 kits, USB and power supply

    Hi,

    Two questions from a phidgets newbie:

    1) I want to hookup three 8/8/8 kits to my PC (I need to process some 16+ analog inputs from my simulator). Can I use the USB HUB to connect the 3 boards to eachother, having only one USB cable to my PC, or do I need a PC with 3 USB ports?

    2) I've read somewhere that I need a power supply when using more than one 8/8/8 kit. Is the power distributed from one "powered" 8/8/8 kit to the others via USB, or do I have to power them all separately?

    Thanks in advance,

    Target.

  2. #2
    alandyer
    Guest
    While Matt is on vacation I will take stab at addressing your queries:

    1) Phidgets does not have any special USB standard. Each card is a USB device.
    Therefore, you can connect as many USB devices (cards) as a given hub supports.
    I am using 7-port USB hubs on my sim with 7 cards plugged into each hub.
    Have a look at Project Magenta's flight sim. They have nice video explaining
    their wiring for a Boeing 737NG overhead panel.
    I think they talk about USB hubs in video
    http://www.projectmagenta.com/videomain.html

    2) Each card that requires its own power, requires own power supply.
    You don't want all that current routed through that expensive server

    Regards,
    Alan.

  3. #3
    Our new friend needs to reach 10 posts to get to the next flight level
    Join Date
    Apr 2005
    Posts
    8
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Alan,

    Thanks for your answers, but I have to admit that they're not completely clear to me...

    - The 8/8/8 kits have a 2 port HUB. If I connect kit #1 to my PC, is it possible to hook up kit #2 and #3 to #1 via the HUB?
    - About the power supplies: how do I know when a card needs its own power (for the moment I'm only interested in the analog inputs)

    Cheers,
    Target.

  4. #4
    alandyer
    Guest
    I see what you want to do.
    Daisy-chain those interface cards power lines.
    Those cards do have DC out as well as DC in for power supply.
    You do raise an interesting question:
    How many of those power lines can one daisy chain?

    We're going to have to defer to Matt on this one

  5. #5
    300+ Forum Addict mauriceb's Avatar
    Join Date
    Dec 2005
    Location
    Gravenhurst, Ontario
    Posts
    446
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: 8/8/8 kits, USB and power supply

    Target,

    I am pretty sure you will need 2X 6V power supplies. Basically, any of the Phidgets interfaces do not need a power supply unless they also feed another card.

    So, in your case:

    1st card: Power supply + 2 USB cables- One cable going to 2nd card and one going to PC

    2nd card: Power supply + 2 USB cables - One cable going to 3rd card and one coming from 1st card

    3rd card: No Power supply needed - One USB cable coming from the second card

    You don't have to worry about overloading the USB output on the PC. If it is asked to supply more current that it can, it simply shuts off and you need to reset by cycling the power on & off. As far as the PC is concerned, it is only supplying one output and this should not overload the USB port.

    An alternative is that you can use a powered USB Hub, connect all your cards to it and one connection to the PC. Would also work but more expensive & not really needed.

    Maurice

Similar Threads

  1. PC power supply to power Phidgets LED 64
    By drum4no1 in forum General Builder Questions All Aircraft Types
    Replies: 1
    Last Post: 07-05-2010, 03:21 PM
  2. 12V power supply
    By Jackpilot in forum General Builder Questions All Aircraft Types
    Replies: 4
    Last Post: 01-24-2009, 03:45 AM
  3. Main Power Supply
    By NNomad007 in forum General Builder Questions All Aircraft Types
    Replies: 18
    Last Post: 11-20-2008, 01:53 PM
  4. PC power Supply
    By BlackWidow in forum Computer Hardware Setup
    Replies: 7
    Last Post: 11-25-2007, 11:50 PM
  5. Power Supply
    By Tim in forum Cockpit Parts and Motion Platforms
    Replies: 1
    Last Post: 05-28-2007, 08:13 AM