pmsystem fuel tank 747

[Peter Parnreiter]

Hello!
In 747 lower EICAS, in the fuel page, the volume(wight) in STAB tank seems to
be the same as the value in the right RES3 tank.
Is this correct?
Is it possible to bring the fuel of the STAB Tank to an own offset (there are
some at 1244 and the following).
But I think the wights of this Fuel center2 and 3 are not calculated in the
Total Fuel Sum.

Can anybody helt me here?
Thanks a lot
Peter

PS: Should the 2 arrorws i the fuel synopsis work?

[Michel Vandaele]

Hi Peter,
With what airfile are you working ?
As here, with the present PMsystem / 747 txt, the fuel pupms led's are on,

aslong there isn't any fuel in the ctr tank.
Also when I fuel up the aircraft main 1 and 4 never shows a value ?

Do you have that experience too ?

B. rgds
Michel



"Peter Parnreiter" wrote in message
news:389863.78111@wb.onvix.com...
> Hello!
> In 747 lower EICAS, in the fuel page, the volume(wight) in STAB tank seems

> to
> be the same as the value in the right RES3 tank.
> Is this correct?
> Is it possible to bring the fuel of the STAB Tank to an own offset (there

> are
> some at 1244 and the following).
> But I think the wights of this Fuel center2 and 3 are not calculated in
> the
> Total Fuel Sum.
>
> Can anybody helt me here?
> Thanks a lot
> Peter
>
> PS: Should the 2 arrorws i the fuel synopsis work?
>
>

[Peter Parnreiter]

Hi
For the moment the complete 747 fuel system seems not to work. For this
reason I started to build this pmsystem part for my own. But it seems to be
impossible (for me) at the moment to pump fuel from stab tank to center tank. I
dont think that this depends on the air file, because if I change values
in main3 tank, in the lower eicas also the stab tank volume is changing.
I use the Model from Pedro Oliveira at the moment, but I have no real
experiance with different air (Model) files.
Which do you use?
Peter

[Michel Vandaele]

Hi Pete,
Yes that's what I experience here too.
As you I'm using also teh Pedro Oliviera one, as this it at the moment the
most realistic one you can find, as PMDG can't be used.

Ciao
Michel



"Peter Parnreiter" wrote in message
news:390206.78111@wb.onvix.com...
> Hi
> For the moment the complete 747 fuel system seems not to work. For this
> reason I started to build this pmsystem part for my own. But it seems to
> be
> impossible (for me) at the moment to pump fuel from stab tank to center
> tank. I
> dont think that this depends on the air file, because if I change values
> in main3 tank, in the lower eicas also the stab tank volume is changing.
> I use the Model from Pedro Oliveira at the moment, but I have no real
> experiance with different air (Model) files.
> Which do you use?
> Peter
>
>

[Michel Vandaele]

Hi Peter,
Can you pls contact me once via my personal mail michelmvd@hotmail.com ?
Thks
Michel
"Michel Vandaele" wrote in message
news:390214.78111@wb.onvix.com...
> Hi Pete,
> Yes that's what I experience here too.
> As you I'm using also teh Pedro Oliviera one, as this it at the moment
the
> most realistic one you can find, as PMDG can't be used.
>
> Ciao
> Michel
>
>
>
> "Peter Parnreiter" wrote in message
> news:390206.78111@wb.onvix.com...
>> Hi
>> For the moment the complete 747 fuel system seems not to work. For this
>> reason I started to build this pmsystem part for my own. But it seems to
>> be
>> impossible (for me) at the moment to pump fuel from stab tank to center
>> tank. I
>> dont think that this depends on the air file, because if I change values
>> in main3 tank, in the lower eicas also the stab tank volume is changing.
>> I use the Model from Pedro Oliveira at the moment, but I have no real
>> experiance with different air (Model) files.
>> Which do you use?
>> Peter
>>
>>
>