Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    Enrico Schiratti
    Guest

    Re: So what is the best way to control the BeoingND?

    Hi Stuart,

    I do not know which build changed that part, in any case the
    current one is 404 on www.projectmagenta.com/updates.html...
    newer builds of CDU and GC are there as well.

    The values are re-set in any case, so that is no symptom for
    it working or not working. And I tested it quite a bit so I
    did not expect this surprise.

    Also, make sure your Glass Cockpit is set to Captain side if
    you are using 401 rather than 411.

    Ciao

    Enrico

    > I have tried this with the '403t' build.
    >
    > I can use the normal 'KNNN' codes okay, but none of the
    > 301, 401 or 501
    > codes appear to be working.
    >
    > I can see them go into 0x4f2, and its being set back to 0,
    > but nothing else
    >
    > is happening.
    >
    > I did most of my testing on trying to set the range using
    > 40n and trying to
    >
    > set the ND mode with 50n.
    >
    > "Enrico Schiratti" wrote in message
    > news:380776.76272@wb.onvix.com...
    >> Hi,
    >>
    >>> Terrain toggle for Capt and Fo without using 4f4?
    >>> How do you toggle Wxr for Fo without using 4f4?

    >>
    >> You can do this with 4F2 from today, please get the
    >> current
    >> MCP from www.projectmagenta.com/latest.html and check the
    >> new docs on www.projectmagenta.com/pmoffsets.html ... the
    >> B,
    >> S and M commands have corresponding values in 4F2 now,
    >> please let me know whether this helps or you need any
    >> further assistance.

    >



  2. #12
    Stuart Whelan
    Guest

    Re: So what is the best way to control the BeoingND?

    Nope, still no luck.

    I have download the builds today, and still can not control the captains PFD

    with the 501-504 commands.

    GC is build 434, MCP is 404, cdu is 370.

    I can set the mode to any mode using the 66-69 commands to set the captains

    mode, but neither the 501-504's or the 511-514 commands are working.

    When in map mode the 40x and 41x commands do not change the range.

    The 30x's 31x's are working fine.

    Are there any configuration settings needed to enable these? Any config
    settings that would disable them?

    IgnoreMCPEFIS is set to off in the GC's.

    Cheers,
    Stuart Whelan.

    > I do not know which build changed that part, in any case the
    > current one is 404 on www.projectmagenta.com/updates.html...
    > newer builds of CDU and GC are there as well.



  3. #13
    Enrico Schiratti
    Guest

    Re: So what is the best way to control the BeoingND?

    Hi,

    can you please send my your MCP.INI file?

    Ciao

    Enrico

    "Stuart Whelan"
    wrote in message news:383666.76272@wb.onvix.com...
    > Nope, still no luck.
    >
    > I have download the builds today, and still can not
    > control the captains PFD
    >
    > with the 501-504 commands.
    >
    > GC is build 434, MCP is 404, cdu is 370.
    >
    > I can set the mode to any mode using the 66-69 commands to
    > set the captains
    >
    > mode, but neither the 501-504's or the 511-514 commands
    > are working.
    >
    > When in map mode the 40x and 41x commands do not change
    > the range.
    >
    > The 30x's 31x's are working fine.
    >
    > Are there any configuration settings needed to enable
    > these? Any config
    > settings that would disable them?
    >
    > IgnoreMCPEFIS is set to off in the GC's.
    >
    > Cheers,
    > Stuart Whelan.
    >
    >> I do not know which build changed that part, in any case
    >> the
    >> current one is 404 on
    >> www.projectmagenta.com/updates.html...
    >> newer builds of CDU and GC are there as well.

    >



Page 2 of 2 FirstFirst 12

Similar Threads

  1. Control Issues
    By dmoblay in forum General Builder Questions All Aircraft Types
    Replies: 2
    Last Post: 02-22-2010, 04:25 PM
  2. GPS Control
    By Buddym in forum I/O Interfacing Hardware and Software
    Replies: 0
    Last Post: 03-09-2009, 04:44 PM
  3. Need some help assigning a control
    By JBaymore in forum FS2Phidget Users
    Replies: 2
    Last Post: 04-27-2006, 04:58 AM
  4. Re: Use of the mcp to control the ND.
    By Enrico Schiratti in forum PM General Q & A
    Replies: 0
    Last Post: 04-13-2006, 11:00 AM
  5. Use of the mcp to control the ND.
    By Patrick Cheminade in forum PM General Q & A
    Replies: 0
    Last Post: 03-11-2006, 05:47 PM