Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Dec 2020
    Location
    London, UK
    Posts
    4
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Mycockpit.org Airbus MCP (Autopilot controls) push/pull potentiometer

    Hi all, I've searched high and low but cannot seem to locate pots that have a momentary (or spring loaded) push AND pull function. The standard rotary pots readily available from Amazon come with a momentary push action but no pull. There are hundreds of varieties used within the Music industry that are push/pull but these do not have a momentary action. You pull them then do your thing with rotation, when done you push them back in. Background: Airbus autopilot control knobs for SPD, HDG, ALT and VS have dual function. You make your selection, and then PUSH for managed (by the FMGC) control or PULL for Selected/Open control. Any clues? Thanks!

  2. #2
    500+ This must be a daytime job



    Join Date
    Jan 2007
    Location
    NEW ZEALAND
    Posts
    908
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Airbus MCP (Autopilot controls) push/pull potentiometer

    hi,
    These controls are hard to get and i have not seen any links but understand they are quite expensive.
    Most of us DIY guys make our own. Not quite as elegant as the commercial ones but useable.
    here is a link to one made with 3d printable parts.
    https://www.youtube.com/watch?v=cEhX...ature=youtu.be
    I made my own by 3d printing a box, mounting a spring loaded centre off switch to the side. I then mounted an
    encoder in the end. Attached a shaft to it that can slide in and out. On the shaft i mounted two collars positioning
    these so when pushed and pulled they operated the spring loaded switch. Rotating the shaft adjusted the encoder.
    The link i posted added and additional switch for use as the Baro.
    Hope this helps
    Les

  3. #3
    New Member
    Join Date
    Dec 2020
    Location
    London, UK
    Posts
    4
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Airbus MCP (Autopilot controls) push/pull potentiometer

    Thank you so much Les. I'll look into this now.

  4. #4
    New Member
    Join Date
    Dec 2020
    Location
    London, UK
    Posts
    4
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Airbus MCP (Autopilot controls) push/pull potentiometer

    I like that but a bit out of my league right now, I might have a crack at this: https://www.youtube.com/watch?v=1OmkiEdfpPI

  5. #5
    500+ This must be a daytime job



    Join Date
    Jan 2007
    Location
    NEW ZEALAND
    Posts
    908
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Airbus MCP (Autopilot controls) push/pull potentiometer

    Yes,thats what i built before i came across the 3d printed one. It works very well.

  6. #6
    New Member
    Join Date
    Dec 2020
    Location
    London, UK
    Posts
    4
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Airbus MCP (Autopilot controls) push/pull potentiometer

    Found a pot that does momentary push/pull but they're around 90USD each. Can get expensive! https://www.mouser.co.uk/ProductDeta...frBpeWJg%3D%3D