Results 1 to 7 of 7
  1. #1
    John White
    Guest

    Re: lag time on GC Boeing

    Hey, are any of you guys running a firewall? I was having the same problem on
    the CRJ.
    I am running Zone Alarm on my computers, and noticed the "Program" setting
    was kinda high. It's the part of the firewall tht regulates programs
    accessing the network. I turned it off and the PM display seeemed to smooth out.
    Dont know if this is really a fix ormy imagination, bt it seemed to help.

    John White


  2. #2
    Roger Wielgus
    Guest

    Re: lag time on GC Boeing

    My cockpit is not connected to Internet. I have only simulation related
    software installed, no firewall, no anti-virus, nothing. Clean and everything
    tuned as recommanded by Project Magenta. ( Disks - services etc..)

    Greetings

    Roger


  3. #3
    null null
    Guest

    Re: lag time on GC Boeing

    I had the problem a while ago when a route in the CDU was corrupted and was
    filled with at least 100000 waypoints. If you're using the CDU, press the
    RTE key twice and then FLUSH. This will eliminate any active routes
    (defective or not) on the netdir.

    Good luck,
    Michael


  4. #4
    Roger Wielgus
    Guest

    Re: lag time on GC Boeing

    Hallo Michael,

    Always by hand in my simulator (I know it's old fashionned). Never bound on
    electronics. I do not use any CDU.

    Kind regards,
    Freundlichen Grüssen,

    Roger


  5. #5
    Chris Danker
    Guest

    Re: lag time on GC Boeing

    Hey Everyone

    The Test FSUIPC and WideFS from Pete Downson under the Newsgroup title
    "Revised FSUIPC3.435 and WideFS6.418 for Testing" works well so far. I was having
    some trouble as well with the last WideFS and FSUIPC which was giving
    problems of PFD & ND Lagging of 20-30 secs. After loading the TEST WideFS and
    FSUIPC, its seems to be working fine now. I wonder if other have had the
    same results.

    Regards,
    Chris Danker
    Kuala Lumpur, Malaysia


  6. #6
    Roger Wielgus
    Guest

    Re: lag time on GC Boeing

    I would love to hear from others too. I cant try for a while because my
    cockpit is down. I am working on the controls.

    Cheers

    Roger


  7. #7
    Giuseppe Reda
    Guest

    Re: lag time on GC Boeing

    Stop at all ! I solved my problem. ))
    To solve that i only followed the suggests of the manual of PM about the fine
    tuning of network.
    Thanks at all for your support and thanks also to Enrico.

    Best Regards
    Giuseppe


Similar Threads

  1. It's Time!
    By Tinosky in forum General Builder Questions All Aircraft Types
    Replies: 4
    Last Post: 04-10-2010, 12:24 PM
  2. Old time builder,new time member
    By Glenn Weston in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 4
    Last Post: 05-23-2009, 03:06 PM
  3. A stitch in time...
    By Westozy in forum My Cockpit Update
    Replies: 4
    Last Post: 02-01-2008, 01:56 PM
  4. Run time error 76
    By Riccardo68 in forum FS2Phidget Users
    Replies: 4
    Last Post: 01-05-2006, 06:57 AM
  5. Run-time error 76
    By christianeme in forum FS2Phidget Users
    Replies: 4
    Last Post: 09-22-2005, 05:52 AM