Results 311 to 319 of 319
Thread: A320 FMGS B46
-
03-02-2017, 03:01 AM #311
- Join Date
- Dec 2004
- Posts
- 71
Re: A320 FMGS B46
If you are using FDS boards, have you used IITcreator for the switch and led assignments?
I have very recently moved from a well known A320 software suite to Jeehell which required a complete reassignment exercise including using IITcreator.
Initially I had a problem as Gen1 and Gen2 would not come on line although all the start-up procedure was correct.
To cut a long story short, I found that the problem was my IDG switches and how they were assigned (up/down/toggle) in IITcreator. The physical attributes of the switches were different to all my other switches. What was happening, because of the way the switch was configured, the IDGs must have been disconnecting straight after powering up the aircraft.
Initially I thought it was a software problem but dismissed that as the start sequence was fine if I used the graphical software without starting my hardware boards.
I'm finding that any errors in your hardware setup will cause problems since the software's logic is excellent!
The IITcreator has a couple of bugs in it e.g. the IDS 2 and 3 Allign leds are the wrong way round...
Regards,
Darren Sugden
-
03-02-2017, 08:25 AM #312
Re: A320 FMGS B46
Hello Jean-Luc,
thank you for your recommendation to check the fire handles... since the APU fire handle assignment is inverted here and one of the wire had lost contact to the micro switch the system thought APU fire handle was active. So that has been the reason for the failures.
Thank you very much for your help!
Only the APU still doesn't run down after switching off on the OVHD. It simply continues running...
Kind regards,
Bon
-
03-02-2017, 03:39 PM #313
- Join Date
- Dec 2016
- Location
- Madrid
- Posts
- 3
-
03-02-2017, 04:28 PM #314
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B46
The APU runs for about 2 minutes after APU bleed has been used (even for a fraction of seconds) as a cooldown period. It will stop automatically when this cooldwon phase is over (and master SW was initially pushed of course).
-
Post Thanks / Like - 0 Thanks, 0 Likes, 1 Dislikes
Paktom disliked this post
-
03-11-2017, 12:25 PM #315
- Join Date
- Sep 2010
- Location
- LGTS
- Posts
- 424
Re: A320 FMGS B46
Hi
Anyone using ATC-PRO/X? I can't get Clearance at the beginning, even though I tune proper freq. All others freq. operate properly (ATIS, Depart etc).
This is not off topic cos I've read in a ATC-PRO/X forum discussion that this Clearance doesn't work for some addons and I hope JeeHell is not one of them.
Thank you
-
03-13-2017, 02:22 PM #316
- Join Date
- Sep 2010
- Location
- LGTS
- Posts
- 424
Re: A320 FMGS B46
Hi
The volume of JeeHell Sound application drops to 5-10% in Windows Sound Mixer. This happens 2-3 times every flight time. Anyone with same issue?
-
03-14-2017, 10:30 AM #317
- Join Date
- Feb 2015
- Location
- Austria
- Posts
- 49
-
03-16-2017, 04:38 PM #318
- Join Date
- Jul 2013
- Location
- Switzerland
- Posts
- 31
Re: A320 FMGS B46
Hey Guys
Have you tried switching the position in "sound" settings "communications" tab to "do nothing"?
https://superuser.com/questions/4500...ndows-7-64-bit
Best regards
Daniel
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
03-19-2017, 05:26 PM #319
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B46
Hello,
B47 is out, check :
http://www.mycockpit.org/forums/show...867#post166867
JL
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
asessa liked this post
Prettys Womans from your city for night
A320 Sound Files Missing