Results 1 to 5 of 5
  1. #1
    Jonathan Richardson
    Guest

    New Phidget software Version

    Dear All Phidget users...

    Alan Dyer has released a new Phidget software version which has a new txt
    based editor file. This means doing away with MSAccess files for the database.
    The main advantage of this is that the Phidget software is no longer
    dependent on you having Access or a particular version of Access if you require
    adding / editing to the database.

    I have done some initial tests and found that it is working well. If no one
    has already done it, I will also begin to compile a list of pmSystems
    offsets (and other pm related offsets) to a primary source file. (if anyone has
    done this already let me know!)

    The new software is avialable from www.phidgetsusa.com cockpit section.

    Regards
    Jonathan Richardson


  2. #2
    Andras Kozma
    Guest

    Re: New Phidget software Version

    Jonathan,

    > I have done some initial tests and found that it is working well. If no
    > one
    > has already done it, I will also begin to compile a list of pmSystems
    > offsets (and other pm related offsets) to a primary source file. (if
    > anyone has
    > done this already let me know!)


    Great, please share it with us.
    I also tried the new software, and it works, but some better variable names

    wouldn't hurt, it takes ages to find out what is what...

    Andras


  3. #3
    null null
    Guest

    Re: New Phidget software Version

    This is good news Jonathan.

    I also did some preliminary testing and was quite impressed. I was able to
    connect my SideSticks and Rudder to the analogs and IT WORKED, properly!

    There does seem to be a couple of bugs, which I'm sure Alan will correct,
    shortly.

    Johathan, or anyone else; let's not just have a list of pmSystems
    offsets.... let's get the whole PM Offsets. It certainly would make life a
    lot easier for this builder

    And... anybody have a way of converting the MDL files into the TXT version?

    Matt O.


    "Jonathan Richardson" wrote in message
    news:272355.54081@wb.onvix.com...
    > Dear All Phidget users...
    >
    > Alan Dyer has released a new Phidget software version which has a new txt
    > based editor file. This means doing away with MSAccess files for the

    database.
    > The main advantage of this is that the Phidget software is no longer
    > dependent on you having Access or a particular version of Access if you

    require
    > adding / editing to the database.
    >
    > I have done some initial tests and found that it is working well. If no

    one
    > has already done it, I will also begin to compile a list of pmSystems
    > offsets (and other pm related offsets) to a primary source file. (if

    anyone has
    > done this already let me know!)
    >
    > The new software is avialable from www.phidgetsusa.com cockpit section.
    >
    > Regards
    > Jonathan Richardson
    >



  4. #4
    Jonathan Richardson
    Guest

    Re: New Phidget software Version

    >Johathan, or anyone else; let's not just have a list of pmSystems
    offsets.... let's get the whole PM Offsets. It certainly would make life a
    lot easier for this builder

    Hi

    Enrico and I are looking into that to see if it is possible or not. If it is,
    it will save me a lot of type and pasting.

    Regards
    Jonathan










    On 11/27/2004 10:21:18 AM, Matt Olieman wrote:
    >This is good news Jonathan.
    >
    >I also did some preliminary
    >testing and was quite
    >impressed. I was able to
    >connect my SideSticks and
    >Rudder to the analogs and IT
    >WORKED, properly!
    >
    >There does seem to be a couple
    >of bugs, which I'm sure Alan
    >will correct,
    >shortly.
    >
    >Johathan, or anyone else;
    >let's not just have a list of
    >pmSystems
    >offsets.... let's get the
    >whole PM Offsets. It
    >certainly would make life a
    >lot easier for this builder
    >
    >And... anybody have a way of
    >converting the MDL files into
    >the TXT version?
    >
    >Matt O.
    >
    >
    >"Jonathan Richardson"
    > wrote in
    >message
    >news:272355.54081@wb.onvix.com...
    >> Dear All Phidget users...
    >>
    >> Alan Dyer has released a new Phidget software version which has a new

    txt
    >> based editor file. This means doing away with MSAccess files for the

    >database.
    >> The main advantage of this is that the Phidget software is no longer
    >> dependent on you having Access or a particular version of Access if you

    >require
    >> adding / editing to the database.
    >>
    >> I have done some initial tests and found that it is working well. If no

    >one
    >> has already done it, I will also begin to compile a list of pmSystems
    >> offsets (and other pm related offsets) to a primary source file. (if

    >anyone has
    >> done this already let me know!)
    >>
    >> The new software is avialable from www.phidgetsusa.com cockpit section.
    >>
    >> Regards
    >> Jonathan Richardson
    >>






  5. #5
    Michel Vandaele
    Guest

    Re: New Phidget software Version

    Hello, Jonathan,

    Would be great, because the complete offset story isn't so easy for guys who

    aren't used to interfacing.

    Great program. I definitievely will use Phidgets for the rest of my cockpit

    interfacing, except of my glareshield (Aerosoft MCP747/EFIS/EICAS.



    Ciao

    Michel

    "Jonathan Richardson" wrote in message
    news:272741.54081@wb.onvix.com...
    > >Johathan, or anyone else; let's not just have a list of pmSystems

    > offsets.... let's get the whole PM Offsets. It certainly would make life

    a
    > lot easier for this builder
    >
    > Hi
    >
    > Enrico and I are looking into that to see if it is possible or not. If it


    > is,
    > it will save me a lot of type and pasting.
    >
    > Regards
    > Jonathan
    >
    >
    >
    >
    >
    >
    >
    >
    >
    >
    > On 11/27/2004 10:21:18 AM, Matt Olieman wrote:
    >>This is good news Jonathan.
    >>
    >>I also did some preliminary
    >>testing and was quite
    >>impressed. I was able to
    >>connect my SideSticks and
    >>Rudder to the analogs and IT
    >>WORKED, properly!
    >>
    >>There does seem to be a couple
    >>of bugs, which I'm sure Alan
    >>will correct,
    >>shortly.
    >>
    >>Johathan, or anyone else;
    >>let's not just have a list of
    >>pmSystems
    >>offsets.... let's get the
    >>whole PM Offsets. It
    >>certainly would make life a
    >>lot easier for this builder
    >>
    >>And... anybody have a way of
    >>converting the MDL files into
    >>the TXT version?
    >>
    >>Matt O.
    >>
    >>
    >>"Jonathan Richardson"
    >> wrote in
    >>message
    >>news:272355.54081@wb.onvix.com...
    >>> Dear All Phidget users...
    >>>
    >>> Alan Dyer has released a new Phidget software version which has a new

    > txt
    >>> based editor file. This means doing away with MSAccess files for the

    >>database.
    >>> The main advantage of this is that the Phidget software is no longer
    >>> dependent on you having Access or a particular version of Access if you

    >>require
    >>> adding / editing to the database.
    >>>
    >>> I have done some initial tests and found that it is working well. If no

    >>one
    >>> has already done it, I will also begin to compile a list of pmSystems
    >>> offsets (and other pm related offsets) to a primary source file. (if

    >>anyone has
    >>> done this already let me know!)
    >>>
    >>> The new software is avialable from www.phidgetsusa.com cockpit section.
    >>>
    >>> Regards
    >>> Jonathan Richardson
    >>>

    >
    >
    >
    >



Similar Threads

  1. Phidget Manager Version
    By Andras in forum FS2Phidget Users
    Replies: 3
    Last Post: 12-08-2005, 04:05 AM