JeeHell networking issues

[mrinalthakkar]

Hi

i'm having similar issues with the networking. (Running one server and one client PC)
As with mrinalthakkar I can successfully ping both computers from each other and all firewalls are off yet still the jeehell apps on the client PC don't register with the server PC.

Ive tried a dedicated switch just for the two pcs and also wirelessly through the home network yet still no joy....

Uninstall fmgs across all PCs

assign permanent IPs using DHCP function in your router

reinstall FMGS , on server PC , install FMGS server conponent , on client PC do not install server component

insert ip into client PC , and you should be up and running

[kalz]

Hi,

@asessa

I've disabled all av and windows firewalls across all pc's before attempting to connect.

@mrinalthakka

I'll give that a go and report back.

[filippoporcari]

using STATIC IPs is a must in a multi pc simulator environment
regards
fil

[kalz]

Hi.

Unfortunately still not working....

In summary:
1) I have disabled all A/V and firewalls before attempting to start server pc and client pc
2) Assigned static ips to both server and client
3) Server and client can successfully ping each other
4) Both server and client have the same navdata



Problem i've noticed

- Configure.exe is not keeping the information i enter with regards to the IP addresses...

[asessa]

Can you post your client widefgms.ini file ?

[kalz]

[widefmgs]
ip=192.168.0.102
port=8003
port2=8004
port3=8005
port4=8006
FSIP=192.168.0.102

[asessa]

Ok...and can you post your complete ip's (client and server, with subnetmask)?

[kalz]

Server
IP: 192.168.0.102
Subnet: 255.255.255.0
Default gateway: 192.168.0.1

Client
IP: 192.168.0.101
Subnet: 255.255.255.0
Default gateway: 192.168.0.1

Thanks

[jeehell]

For what it's worth, I had issues with bitdefender firewall recently. This is not necessarily the same issue you have, but it was kind of annoying, to the point I had to uninstall bitdefender altogether.
The firewall built in security suites is not always working correctly (same as windows default F/W by the way...).
In the case of Bitdefender one, even if I deactivated the F/W module, it would keep my computers from being visible one to the other.... (probably because of a WiFi/cable mix in the network, but still..).
SO REALLY BE CAREFUL with firewalls.
Issues I had with default windows firewall were I needed to delete an app already approved to reallow it to make it work (particularly on reinstall of the WideFMGS software).
JL

[kalz]

Hi

I tried a different FS gauges software across the same two pcs with the same IP settings and had no trouble with getting it up and running... so the pc's are communicating with each other
really annoying as I want to use JeeHell..

I will try a clean re-install on both pc's.