A320 FMGS B37

[jeehell]

when you say no map, does it mean you get the red MAP NOT AVAIL flag, or only that you don't get the VOR/NDB/ARPT/FIX on the ND?
Did you try running the ND on the server computer?
Can you check if there is any error message in widefmgs windows on clients and server?

JL

[anzabon]

JL, I'm too silly!
I've given the IR3 switch a wrong function - I've assigned IR3 with an IR1 function, so switching IR3 on NAV has switched off IR1! My fault, now it works!!! I apologize for your time you've spent on this issue.
Many thanks, your software is the best on the market! Now it works!
Best regards
Bon

[RigoA320]

Hi JH I have a problem, and although my OVHP freezes constantly a after 20 seconds, no matter what software is installed. the driver of Fs cockpit is all connegdet, but I can no longer switch after 20 seconds or off press. Then do I have to restart the computer, even though I only Lokig is installed there is no improvement. Have an idea? Greetings Rigo

[tcane]

Hi Jehell,

thanks for your newest Update!
Insofar as it works, but unfortunately not all. Maybe it´s possible that the problem comes not from your software. Using OVHD only as the Hardwareversion and it works fine. Nice Job!

According Server the clients are not connected, but it seems to be that the clients are connected because it works. Strange thing.

Another big problem, what i got is with SIOC 5.0.
Only sometimes my Hardware who is connected to Jeehell via SIOC crashes. After some minutes i can´t change everything, the same with the outputs. Sounds a little bit like the problem from Rigo.

For an example: I push the AP Button on my Hardware FCU... nothing happens! If i push this button on the Software FCU... it works perfect, but the LED on the Hardware FCU doesn't turn on. So, it seems as if the problem probably are related to SIOC. A restart of SIOC and the Jeehell Server doesn´t solve the problem. Only after a complete restart of Server computer all works fine again.
Again... This only happens from time to time but perhaps it depends with Jeehell.

Cheers
Florian

[jeehell]

Hi

@Rigo : sorry I do not see what may go wrong.

@Florian : did you try to just restart the hardware Connect app? Please also make sure you do not have an antivirus or security software blocking anything. In SIOC, look for the number of IOCP clients connected (before and after the crash).
Did you try with another SIOC version?

JL

[navigator88]

Hello Jeehell,
unfortunately since the automatic update after version 37, I'm having problems with overhead panel on my client pc.
I have two computers with jeehell software installed: on the server there is prepar3d v2.4 , FSUIPC, WIDEFS,joysticks,rudder pedals and all skalarki usb modules connected, on the client all the instruments connected over three monitors plus another one for the overhead.
the issue is that the overhead pnl does not appear and to get it,
I have to run the overheadapp.exe manually, but doing so there's no way to switch any buttons or rotate any selectors. the issue with master switches not going to off has been solved.
Thanks anyway for all the efforts you do to make this great software better and better.
Regards
Ben

[jeehell]

Hi Ben,

did you try to update this morning? there was an update late last night.

Regards
JL

[navigator88]

Hi Ben,

did you try to update this morning? there was an update late last night.

Regards
JL

Yes jeehell, I tried but unsuccesfully. the overhead panel does not appear , I have to run the.exe manually but I can't interact with the panel.

Cheers.
Ben

[jeehell]

On the OVHDapp computer, check in the starter.ini file that you have the line OVHD=yes (and NOT =no).
Do you use windows 7 or 8?
If you really cannot run the OVHDapp with the starter, check that you use the same rights to open it (I recommend admin rights).

JL

[navigator88]

On the OVHDapp computer, check in the starter.ini file that you have the line OVHD=yes (and NOT =no).
Do you use windows 7 or 8?
If you really cannot run the OVHDapp with the starter, check that you use the same rights to open it (I recommend admin rights).

JL

Hi Jeehell, in the starter.ini in the line OVHD is=yes. I'm using windows 7 64 bit and I make run the software on both pc as administrator.
I don't know what it can be.

Cheers
Ben