A320 FMGS B35

[filippoporcari]

hi jl,
just updated with auto update (4/10 update) and now starting fmgs on client throws I/O ERROR 32 (if i remember well) when launching EIS which i use for all the displays (cpt and fo)
never experienced this
regards
fil

[janinp]

Hi Fil,

I have exactly the same problem. SD I/O Error 32 and some PFD or ND panels cannot be displayed. Hope we can solve this together with JH.

Pierre

[navigator88]

Hi everybody, I've got the same problem after updating the A320 FMGS software. i/o error 32 with PFD and ND not connected and sometimes with clock or triple indicator or ISIS not displayed. Hope Jeehell will solve these issues with a new update.

Ben

[OmniAtlas]

Sorry, posted this in the wrong thread:

JL - thank you for the A/Thr fix -- engines do not accelerate now on A/THR activated on

Just a couple questions --

-I believe the latest MCDU software on the real aircraft, there is a name change from MDA -> BARO and DH -> ALT (or some variant) on the approach page -- will you be planning to change this?

-I think this was previously mentioned regarding the braking logic -- brakes are locked and require a press on the pedals to release after parking brakes are released. Is this also the same logic on the aircraft? Does pressing both brake pedals on at the same time also release the parking brakes?

- At flaps full, flap sounds are looped and repetitive.

Thank you again for the quick updates.

[filippoporcari]

ben did u experience any issue starting the EIS on client pc?
i have the exact same issue as reported by pierre
cheers
fil

[jess-b]

Just to confirm what others are saying. I'm getting a SD I/O error after the latest update. The previous version was working well though.

[buentead]

I have the same SD I/O error as well. Then I set the 'clock' start-up from 'yes' to 'no' in the starter.ini. And now it works. I didn't verify if I will get the error when I put it back to 'yes' ...

Adrian

[filippoporcari]

just updated again with this evening auto update but unfortunately the i/o error when running EIS still persist
regards
fil

[jess-b]

I have the same SD I/O error as well. Then I set the 'clock' start-up from 'yes' to 'no' in the starter.ini. And now it works. I didn't verify if I will get the error when I put it back to 'yes' ...

Adrian

To follow up on this, it appears the issue is with the standby instruments. I did a bit of testing and it seems the software can only display one standby instrument at a time. In my case, I removed the clock, ADF, stby alt, and airspeed and all displayed well. Turing one of these on, and everything still works. However putting two up causes the I/O error. So for now I think I'll stick to the Isis and wait for a fix.

Jess

[filippoporcari]

just re updated with this morning update and the io error on EIS is gone!
a big thank u JL!
regards
fil