A320 FMGS B31

[startrail]

Hi JL;

After installing b31.1 i have had some problems:

- I can not calibrate the Rudder in FMGS config. When starting a flight I can not see any movement of the rudder despite it shows it of ECAM FLT CTRL. When reaching speed of 100 the rudder shifts suddenly to the right and becomes controallable but keeps swaying slightly left and right all the time.Have tested Saitek rudder on other computers besides mine and it is working perfectly.
- In hardware connect keeps showing EHID socket Error EHID disconnect.

I am using FScockpit .

Thanks

Mike

[jeehell]

Hi Marco,

Try the following to save AA setting: after quitting the "options window', right click then "save position". Close, the software, and restgart, it should do it.

Regards,
JL

[SimStar001]

Hi Jeehell, thanks for help, AA settings could be saved this way. It works. I´ve got now another problem. I want to use the ISIS for Stby Instrumentation. But ISIS will be visible for about 1 seconod after starting up Stby Instruments, thereafter ISIS screen stays black. Do you have an idea what is going wrong here?

Best Regards

Marco

[jeehell]

Hi,

did you get the http://www.jeehell.org/A320FMGS_B31.1.exe ?

[startrail]

Hi JL;

After installing b31.1 i have had some problems:

- I can not calibrate the Rudder in FMGS config. When starting a flight I can not see any movement of the rudder despite it shows it of ECAM FLT CTRL. When reaching speed of 100 the rudder shifts suddenly to the right and becomes controallable but keeps swaying slightly left and right all the time.Have tested Saitek rudder on other computers besides mine and it is working perfectly.
- In hardware connect keeps showing EHID socket Error EHID disconnect.

I am using FScockpit .

Thanks

Mike

Hi JL

Further to above, I have reinstalled B31 instead of B31.1 and everything is working perfectly. So the problem is originating from B31.1.

[jeehell]

Hi startrail,

please check the calibration of rudder and of tiller.

JL

[startrail]

Hi startrail,

please check the calibration of rudder and of tiller.

JL

I did did when I had B31.1 . Tiller working well , rudder very difficult to calibrate as with the slightest touch it shifts either full right or left during calibration. During flight I could not see any response from rudder when using the pedals even tough it is showing movement in FLT CTRL . Control of rudder becomes possible when airborne but still shifting to the right.

in B31 all these disappeared and everything back to normal.



THANK YOU FOR YOUR ATTENTION



MIKE

[jeehell]

You may want to recalibrate your rudder axis in windows prior to calibrating in my software. Go to Control Panel ->devices and printers.

Regarding the EHID driver, you probably did not look closely during installation and installed it without needing. Go to FMGS\Hardware Modules folder and delete EHIDmodule.dll.

Regards,
JL

[startrail]

You may want to recalibrate your rudder axis in windows prior to calibrating in my software. Go to Control Panel ->devices and printers.

Regarding the EHID driver, you probably did not look closely during installation and installed it without needing. Go to FMGS\Hardware Modules folder and delete EHIDmodule.dll.

Regards,
JL

I have aver calibrated under windows 3 times and reinstalled b31.1 equally but in vain.
now in B31 it is working perfectly

Regards

[SimStar001]

Hi,

did you get the http://www.jeehell.org/A320FMGS_B31.1.exe ?

No BETA 31.0.... as soon as Server Starts, display goes into black....

How to create the NavData? (on server Start there comes an error message.... ".... navrecord.dat" not found