A320 FMGS beta 30

[filippoporcari]

hi again JL,just made the test and also running only cpt pfd, cpt nd, ewd and sd the pfd keeps having lags and stutters...pretty impossible to fly.
of course the issue is on my side...unfortunately i couldn't open task manager to check the cpu load...anyway i suppose my pc should be able to run smoothly cpt side + ewd + sd...what u think?
the OS of this remote computer is a stone age old win XP....32 bit...never gave me problem so i've been lazy and never upgraded that one to win7 64.
i spent time optimizing FS pc
do u think the OS could create the issue?
thanks a lot
fil

[asessa]

Hi JL, in this time i'm in flight, after 10 mins to takeoff i still have TO INIBHIT and the A.FLOOR when climb

[Miatanet]

Hi

@Antonio: I will add that

@Stefan: the door page does not show the FS door status unfortunately...

Regards,
JL

Hi JL,
so it does not show it at all, or do I have to configure the door status somewhere?

Regards
Stefan

[stefangr]

TO inhibit should be corrected with latest automatic update.

Regards,
JL

Hi,

I made a test flight yesterday with all available updates:

1. I am also having the T.O INHIBIT problem.

2. The 3 green on A/B Panel remain on after gear up. I am using Skalarki hardware. This used to work in B29.

3. I also noticed that the autothrust has become a bit nervous again on CRZ LVL. The N1 is going up and down always between 80 and 83%.

4. TCAS is giving me lots of warnings now, even when traffic is more than 8000 feet above or below. Is that like in real life?

Thanks
Stefan

[filippoporcari]

hi again JL,
i re-read the manual about installation instructions to be sure i did everything in the correct way...could u pls confirm my setup is correct?

FS PC (server): fmgs server, ap/fbw, hardware connect, fsx connect, fsuipc connect (maybe this is not needed? read somewhere u use simconnect now), ovhd, fcu, mcdu...of course i'm talking about only your software modules, i've no hardware at this stage (only a joy and a throttle to make the tests)

REMOTE PC: pfd, nd, ewd, sd. (am i missing something here? ...i did NOT install fmgs server here)

i'm pretty sure i did something wrong somewhere in the installation and missing something.
regards
fil

[asessa]

Hi guys, hi JL, this is a report of my flight :


1. After takeoff the "T.O. INHIBIT" message remain till to land.
2. If i program at start an ILS approach, the "ILS APP" message was displayed from the takeoff (but it should be display only 250nm before land)
3. During climb i have many "A.FLOOR" message and the speed decrease. I had to stop climb at 290 (i programmed 330).
Can this situation be influenced by weather engine? (i use REX 2.0)
4. During approach when i disengaged AP the nose went up
5. Dus dimmers of CockpitSonic Ecam panel doesn't work (i report also in relative topic)


I updated B30 to last version yesterday before fly.


Regards
Antonio

[filippoporcari]

hi antonio...we catch each other here as well as on Volovirtuale forum
i don't want to answer for JL of course...but as a standard rule when testing autopilot auto throttle behaviour the best is to check them with no weather engine at the beginning...just to be sure everything is working properly with no wind/turbulence interfering...
just my 2 cents
filippi

[asessa]

hi antonio...we catch each other here as well as on Volovirtuale forum
i don't want to answer for JL of course...but as a standard rule when testing autopilot auto throttle behaviour the best is to check them with no weather engine at the beginning...just to be sure everything is working properly with no wind/turbulence interfering...
just my 2 cents
filippi

Hi Filippo, yes i know it.
I have only reported to JL about my last flight.


Regards

[jeehell]

Hi all,

there was an issue with previous auto update. Please try again...

I will be away for the weekend, I'll look at the other issues when I'm back.

Best regards,
JL

[asessa]

Thank you JL and have a good vacation