A320 FMGS beta 30

[jeehell]

Can you check in wideFMGS fodler that the application is indeed installed??

JL

[Toulouse]

Indeed, it´s not. Only WideFMGSserver on both client and sever machine. How come ? I always used the normal installation routine

[jeehell]

As I said in an earlier message, you probably did not uncheck unecessary items during the installation process. The FMGS Server MUST NOT be installed on remote computers. Please run the installer again, and make sure you uncheck the FMGS server option.

regards,
JL

[Toulouse]

I´ll try that - sorry I ran into that mistake though it´s been dealt with already. Thank you for fast replies and help.
Greetings, Toulouse

[AirFan]

Hi JL,

again some feedback with latest online update:

#1 the overspeed warning works. Dont know how I managed that it did not work in 2 flights. Today I tried and it works.

#2 the land gear indicator korry light up with initial power up and go dark when AC is unpowered but will not light up again when repowered. However, if you do a light test after first power off, the lights are back on.

#3 in managed DES. the ptich FD bar disappears. Dont know yet in which situations. When restart the FD, the bar is back and the FCU is in selected vs mode.

#4 Autothrust: Hm? hard to tell... it is better than before the last update but not as good as in b28. When you decrease you speed you see an overswing. So the speed drops below 5kts of target. In addition I noticed that the target speed is not 100% kept. There is often an offset of about 2kts. This is my impression.

#5 roll/pitch behaviour with AP off: I really like it! My impression is that this new setup is way better when in manual flight. Except the GRD-FLT transition during rotation. This is a real issue. With AP on, I need more time testing, I guess there are some things that need some tweaking....

#6 SPL-DISARM for OC hardware

#7 You did not answer this one, yet: Did you touch the lateral path contruction on ND? It seems better! LIKE IT.

#8 sound of the putting FLAPS from 0 to 1 before takeoff. This sound seems to short and is looped during transition very often. It just sounds strange. But the rest is REALLY REALLY NICE!! THUMBS UP!

#9 hope these feedbacks do help

Best regards & big Thanks!
Rob

[jeehell]

Hi Rob,

#2 I'll look at it

#3 if you can pin the exact conditions that would be helpful. it seems there is a mode reversion occuring, that might the key?

#7 did not touch a single line there

#8 sounds are not of my making...

Regards,
JL

[Leonidas]

#8 sound of the putting FLAPS from 0 to 1 before takeoff. This sound seems to short and is looped during transition very often. It just sounds strange. But the rest is REALLY REALLY NICE!! THUMBS UP!
Rob

Talking about sound, why I never hear the sound of flaps, air brakes and gear; Any idea?
Regards

[fagagomez]

Hi JL

I live in Chili.

Firt, I congratulate you on your software A320 FMGS. Excellent.

I need your help.

When take-off roll,track is a continuous green line in ND, but after take off the green line is dashed.
In the FCU , the speed and HDG control I can´t push or pull. Digits are shown and I can't to activate the managed speed modes and managed lateral modes. The dashes not appear and nor the white dot.

Am I doing something wrong?

Please HELP ME.

Best regard

Fabián
Chile

[fagagomez]

Hi JL

First , I congratulate

First,I want to congratulate for A320FMGS. It's fantastic.

But, I have a problem.

I can´t select manages speed mode and managed lateral mode. The dashes and white dot don't appear. The track in ND is a continuous green line ,but , after take off this line is discontinuos. I push and pull the HDG and speed control but nothing happens.

Am I doing something wrong?

Best regard.

Fabián
Chile

[stefangr]

Have also just done the automatic update: And now I am getting the windows error message "A320 Server: Invalid pointer operation" about every 20 seconds. Confirming this message with OK, everything runs back normal, but the message will appear again and disconnect the server from the client. Maybe anything to do with yesterday's update?

Thanks
Stefan

Hi,

I have done the latest update today, but still getting this error message "A320 Server: Invalid pointer operation" about every 20 or 30 seconds.

Thanks
Stefan