Build a Radio Stack??

[Westozy]

Hi Tunatuk,

My radio box between the seats has 8 push button rotary encoders fitted. 2 for each Comm, (whole and decimal), 1 for each nav and 1 for each ADF) When I push down on any of the encoder knobs, the radio window toggles up on the main window and I can then turn the encoders and watch the frequencies change. It is hooked up to my Sim-Boards and works brilliantly - this was a pretty cheap and satisfying solution. I guess other interface cards can do this too.

Gwyn

[tunatuk]

..........

[Westozy]

I have 8 pushbutton encoders wired through FDT Sim-Boards, push any of them and they toggle the radio panel on the main view, and I dial in the frequencies and push to toggle off again, it works!

Gwyn

[PeterH]

How about FSBus, the classic version. Cheap easy to build and it works provided the soldering and board etching is done well.

Look here: www.fsbus.de

br

Peter

[Bob Reed]

Yes you should be able to it with Classic FSBuss. You should be able to do it with any interface where you can program switches.