Results 1 to 9 of 9
  1. #1
    75+ Posting Member Kerbo's Avatar
    Join Date
    May 2008
    Location
    St Louis, MO, USA
    Posts
    146
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    GA style avionics knobs

    Does anyone have a source for GA style knobs for an ALPS EC11EBB24C03 concentric encoder?

    What I am looking for is something that would be on a KX155B nav/com and other GA avionics.

    Here is a link to a pic.

    Thanks!
    Kerbo on YouTube or Twitch
    github.com/wriley

  2. #2
    Our new friend needs to reach 10 posts to get to the next flight level
    Join Date
    Jan 2009
    Location
    EDDH
    Posts
    8
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I got mine from Vmax about a year ago, but cannot find any reference on their website anymore

    Andy

    EDIT: found them on http://www.cockpitsonicusa.com/ see Accessories
    They have different knobs though, not the original narrow black ones, but gray big ones.

  3. #3
    150+ Forum Groupie XOrionFE's Avatar
    Join Date
    Jan 2008
    Location
    Sugar Grove, IL
    Posts
    264
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I dont know if for that encoder but I know you can buy them from the good folks at GoFlight. They sell the dual encoder from Alps as well.

  4. #4
    75+ Posting Member Kerbo's Avatar
    Join Date
    May 2008
    Location
    St Louis, MO, USA
    Posts
    146
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    EDIT: found them on http://www.cockpitsonicusa.com/ see Accessories
    They have different knobs though, not the original narrow black ones, but gray big ones.
    I ordered a pair of encoders with these knobs and they are indeed huge and would look very out of place in a GA aircraft.

    Quote Originally Posted by XOrionFE View Post
    I dont know if for that encoder but I know you can buy them from the good folks at GoFlight. They sell the dual encoder from Alps as well.
    Does anyone have a better picture of what these concentric knobs look like? The picture on GoFlight's site is horrible.

    Thanks!
    Kerbo on YouTube or Twitch
    github.com/wriley

  5. #5
    75+ Posting Member
    Join Date
    Oct 2008
    Location
    ontario
    Posts
    95
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Coincidentally I emailed the cockpitsonicusa folks this morning with a couple of questions on this encoder/knob and Manolo responded very promptly. Answered my questions and also told me that he is currently out of stock of the knobs. His vendor has run out and stopped production so he is looking for another supplier. Hopefully your order was placed/shipped before that happened.

    I have been following your progress through your posts here and at your blog. Very good stuff as I am hoping to get a 172 pit together some day. Not as ambitious as yours due to limitations in my skill set ( I would never tackle a DIY gauge for instance ) but it gives me some excellent ideas. Also tempts me to try some "simpler" tasks like your key switch. Just curious why you went with a 4-pole, 3-position switch that you modified to be a 1-pole, 5-position switch as opposed to buying a 1-pole, 5-position switch to start with. Was it simply because you had (or could get) the 4-pole , 3-position switch already?

    Keep us GA folks updated, it is an excellent resource for us.

    Cheers, Dave

  6. #6
    150+ Forum Groupie XOrionFE's Avatar
    Join Date
    Jan 2008
    Location
    Sugar Grove, IL
    Posts
    264
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    In this photo you can see the GoFlight Rotary knobs and in my homemade GPS you can see the same type knob on dual encoder that I ordered from GoFLight.

    http://www.mycockpit.org/photopost/s...18&ppuser=2922

  7. #7
    1000+ Poster - Fantastic Contributor
    Join Date
    Nov 2008
    Location
    Europe
    Posts
    1,934
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Do you know what i hate about building my GA simpit?

    Is the fact that if you cant afford simkits or real guages for your sim and you have to rely on software guages, you always have to position the software gauges (i.e screen) ON TOP of your yoke because there is no way of displaying a guage either side of your yoke!

  8. #8

  9. Thanks jollive thanked for this post
  10. #9
    75+ Posting Member Kerbo's Avatar
    Join Date
    May 2008
    Location
    St Louis, MO, USA
    Posts
    146
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by colt45 View Post
    Just curious why you went with a 4-pole, 3-position switch that you modified to be a 1-pole, 5-position switch as opposed to buying a 1-pole, 5-position switch to start with. Was it simply because you had (or could get) the 4-pole , 3-position switch already?
    Hi Dave,
    I bought that switch at my local electronics surplus store thinking it was a 1-pole, 12-position switch since that would give me the degree spacing I wanted and I could simply use 5 of the 12 positions. When I was building and went to take a closer look I realized it was a 4-pole, 3-position switch. Oops. A little hackery later and I had a 1-pole, 5-position switch.

    Quote Originally Posted by XOrionFE View Post
    In this photo you can see the GoFlight Rotary knobs and in my homemade GPS you can see the same type knob on dual encoder that I ordered from GoFLight.

    http://www.mycockpit.org/photopost/s...18&ppuser=2922
    Thanks, that helps a lot. These are certainly closer to what I am wanting. I also have my eye on eBay with the idea of getting the real knobs and casting more.

    Quote Originally Posted by Gsey View Post
    http://www.surplussales.com/ShaftHardware/Knobs-8.html

    More knob options on the left as well.
    Thanks Gary, those look nice.
    Kerbo on YouTube or Twitch
    github.com/wriley

Similar Threads

  1. GA style avionics knobs
    By Kerbo in forum General Builder Questions All Aircraft Types
    Replies: 8
    Last Post: 01-29-2009, 05:59 PM
  2. Avionics Master Switch vs. Avionics Switch???
    By Tomlin in forum I/O Interfacing Hardware and Software
    Replies: 4
    Last Post: 08-08-2008, 09:28 AM
  3. Military style contol knobs
    By GlynD in forum Where to Start Building a Home Cockpit
    Replies: 11
    Last Post: 03-20-2007, 04:16 AM
  4. Boeing Style MCP knobs
    By heclak in forum General Builder Questions All Aircraft Types
    Replies: 7
    Last Post: 11-27-2005, 11:00 PM