Progamming help with FSBus dll

[RobiD]

Does anyone out there have any examples of this programming stuff? I have completed buiding an Engine Oil gauge using servos that will be put into a Bell 206 panel. The gauge contains 2 servos, one for the pressure on the left of the gauge and one for the temp on the right of the gauge. It works fine in the fsbus setup. I am having a really hard time 'wrapping my head' around the programming. Stefan has been extremely generous in his help getting the files set up. If someone can come up with an example of making a servo work through all of this, it would be appreciated. I get confused when it comes to when I need to have a .cpp file, a .h file and so on. Is there a set way of doing all of this so it makes sense? What I mean is....if I want to make an engoilpress object, what needs to be put in what file to make it work? Please help, I know I am old, but I have a few brain cells left, and hopefully this stuff can be beaten into me. I do see some examples in in this thread, but I can not get them printed out so that they are useful to me. So, something that I can print out and look at while I am working on mine would be of great help.

Milt

Hi Milt,

Here is a zip file of my complete project. In it you will find examples of servo, switches, rotaries, aircore movement gauges, all except steppers.

Download it from here : http://www.safeweighloss4kids.com/do...Flight_sim.zip

Regards
David

[mondo50m]

Thank you, Thank you. This will get me the knowledge that I am looking for. I have gotten the eng oil temp and pressure, transmission temp and pressure, and torque percentage gauges complete. I am almost done with the attitude gauge. I have the first three programmed and running, but get stuck on some of the programming, so this is going to be what I need.

Milt

[Jan737]

Hi,

The link seems not to work.

Best regards

Jan Geurtsen

Hi Milt,

Here is a zip file of my complete project. In it you will find examples of servo, switches, rotaries, aircore movement gauges, all except steppers.

Download it from here : http://www.safeweighloss4kids.com/do...Flight_sim.zip

Regards
David

[mondo50m]

Use http://www.safeweighloss4kids.com/ (I believe this is what I did). Then when you get to the website, just type in the donotlookhere in the url area and then choose the file from the list.

Milt

[RobiD]

Opps, forgot the 't' in weight.

Link is: http://www.safeweightloss4kids.com/d...Flight_sim.zip

Sorry guys.

[mondo50m]

HA! HA! HA! Dd not matter, I got to it anyway.

Milt

[shearder]

Hey David

You know i have spent hours and i cannot figure what i did to get the APP to work for the glide slope! It disables heading and intercepts and turns into the glide-path but when it intercepts the glide-slope it does not disable the ALT and follow the slope down!!

I am lost! Damn hard drive - i should have backed it up but when i say it crashed i mean it is no longer "seen" by the system on ANY PC. so all changes i made to the project are lost!

[RobiD]

Sean, perhaps Stefan can take a look at the code. Chances are that if your code is not disabiling the ALT and following the glideslope down, neither is mine.

Can you post the code for the APP. My understanding is that everything that is meant to happen when you push APP should be in this section of code (I hope).

Stefan, can you take a look and let us know?

Thanks
David

[shearder]

David, I am not home right now and the code i will have to post was the default code i was building on from you. I got it working like a charm and after the crash forgot what i fixed. I remember comparing why the HDG was working and not the ALT and then "did something" but i never did much after getting it all to work and now it has been a whle that i can;t remember what it was LMAO - a pain really!

[RobiD]

Bugger, I wish I could remember for you.

Perhaps just sitting with it for a while without pressure, it may just occur to you again.

Please let me know, or at least write it up here to benefit others (perhaps even yourself again... No, I bet it won't happen again)

David