Results 1 to 4 of 4
Thread: Fourth monitor problem
-
05-02-2008, 04:19 PM #1
- Join Date
- Mar 2008
- Location
- Dartford, England
- Posts
- 66
Fourth monitor problem
Hi guys, hoping you can help me out as I'm getting seriously p*ssed with my hardware right now!
I've had a TH2G running with 3 acer 22" monitors for a week now, no problems whatsoever. I then plugged a fourth monitor into the second slot on my 8800GT and up loads the small 19" Dell monitor, whilst my TH2G monitors don't receive a signal.
I've tried unplugging the Dell monitor and my TH2G still doesn't get a signal, and even when I swap the leads around the TH2G monitors doesn't get a signal and switches to standby.
Now, even with the Dell monitor completely unplugged, the TH2G still will not load and the screens go to standby, meaning effectively I can have 1 small screen display of 19" or nothing at all. Clearly, having spent about £700 getting the bits, this isn't the result I was looking for! Does anyone know how I can get the TH2G screens working as my primary monitor again? I just wanted the 19" one to display Simcharts, but it's done nothing but bring me aggro!
I'm running Vista and my PC is made by Dell, which could explain why it sets the Dell monitor as primary. I would turn this off, but alas I can't get into the display settings without it on!
I've got a new MCP-Pro and throttle quadrant that I'm desperate to try out, but this is really getting on my nerves. Any help much appreciated guys.
Thanks.
-
05-02-2008, 06:43 PM #2
- Join Date
- Sep 2007
- Location
- USA
- Posts
- 31
Jimmy
I am running a setup about the same as yours TH2go 3 21 inch monitors and a second off brand monitor on the second output also running vista on a Dell. I am not a that computer now but I think your Matrox control panel is where you will find the settings that should let all 4 monitors work. If you dont find it there let me know and i'll check how mine is setup. I would also check the usb cable to make sure it hasn't come loose.
Pete
-
05-02-2008, 06:58 PM #3
- Join Date
- Sep 2007
- Location
- USA
- Posts
- 31
Jimmy
just checked my settings, its the Nvidia control panel choose multiple monitors and select dual view hope that helps if not let me know
Pete
-
05-06-2008, 06:54 PM #4
An 8800 shouldn't have any issue pushing a TH2G through 1 port and a 19" through the second. Have you enabled the second monitor port via the control panel? You need to extend the desktop into it.
In Control Panel Classic View:
"Control Panel" -> "Personalization" -> "Display Settings" -> Select the grayed out monitor -> Check "Extend the desktop into this monitor" -> "Apply"
Also, within this "Display Settings" window you have the ability to set any monitor as primary.
It won't send signal to that second port without doing that. Also...multiple ports do not work in SLI, so if you're using SLI, disable it and do the above again. I can't tell from your post if you have an SLI setup or not. The 8800 can push up to 8196 pixel width, so I don't believe this is a hardware issue.
If you troubleshoot all the above I posted it should all work ok.
Similar Threads
-
Specs for LCD TV as Monitor
By Holclo in forum Video Interfacing and HardwareReplies: 3Last Post: 03-10-2010, 02:57 PM -
Acer TFT 19 monitor, strange problem
By oal331 in forum Computer Hardware SetupReplies: 2Last Post: 02-17-2010, 10:56 AM -
Monitor Help
By CessnaGuy in forum Computer Hardware SetupReplies: 0Last Post: 01-23-2010, 07:40 AM -
Fourth monitor no workie
By Michael Carter in forum Cockpit Outside VisualizationReplies: 2Last Post: 02-22-2009, 02:07 AM -
Another Multi-monitor Problem
By AndyT in forum Computer Hardware SetupReplies: 9Last Post: 07-07-2008, 03:20 AM
Pretty Girls from your city for night
Generic Analog Gauges